ISO/IEC 7816-9:2017

Identification cards — Integrated circuit cards — Part 9: Commands for card management

ISO/IEC 7816-9:2017 specifies interindustry commands for card, file and other structure management, i.e. data object and security object. These commands cover the entire life cycle of the card and therefore some commands are used before the card has been issued to the cardholder or after the card has expired. For details on record life cycle status, refer to ISO/IEC 7816-4. ISO/IEC 7816-9:2017 is not applicable to the internal implementation within the card and/or the outside world.

Cartes d'identification — Cartes à circuit intégré — Partie 9: Commandes pour la gestion des cartes

General Information

• Status: Published
• Publication Date: 06-Dec-2017
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 4 - Generic interfaces and protocols for security devices
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 03-Oct-2023

Relations

• Revises: ISO/IEC 7816-9:2004 - Identification cards — Integrated circuit cards — Part 9: Commands for card management
• Effective Date: 08-Nov-2014

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 7816-9
Third edition
2017-12
Identification cards — Integrated
circuit cards —
Part 9:
Commands for card management
Cartes d'identification — Cartes à circuit intégré —
Partie 9: Commandes pour la gestion des cartes
Reference number
ISO/IEC 7816-9:2017(E)
©
ISO/IEC 2017

---------------------- Page: 1 ----------------------
ISO/IEC 7816-9:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO/IEC 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 7816-9:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Symbols and abbreviated terms . 2
5 Life cycle .3
5.1 General properties . 3
5.2 Generic life cycle status . 4
5.3 Command-dependent life cycle status transition . 6
5.4 Life cycle status inheritance and evaluation . 7
5.4.1 General. 7
5.4.2 General rules for life cycle status evaluation . 7
5.4.3 Behaviour for effective LCS . 8
6 Commands for card management .8
6.1 General . 8
6.2 create file command . 9
6.3 delete command .10
6.4 deactivate command .10
6.5 activate command .
...