ISO 4586-5:2015

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

ISO 4586-5:2015 applies to five classes of flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates, to produce HPL (HPDL) flooring elements.

Stratifiés décoratifs haute pression (HPL, HPDL) — Plaques à base de résines thermodurcissables (communément appelées stratifiés) — Partie 5: Classification et spécifications des stratifiés pour revêtement de sol d'épaisseur inférieure à 2 mm destinés à être collés sur des supports

General Information

• Status: Withdrawn
• Publication Date: 27-Oct-2015
• Withdrawal Date: 27-Oct-2015
• ICS: 83.140.20 - Laminated sheets
• Technical Committee: ISO/TC 61/SC 11 - Products
• Drafting Committee: ISO/TC 61/SC 11/WG 2 - Decorative laminates and solid surfacing materials
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 02-Jul-2018

Relations

• Revised: ISO 4586-5:2018 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
• Effective Date: 24-Dec-2016
• Revises: ISO 4586-1:2004 - High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
• Effective Date: 01-Nov-2014

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 4586-5
First edition
2015-11-01
High-pressure decorative laminates
(HPL, HPDL) — Sheets based on
thermosetting resins (Usually called
Laminates) —
Part 5:
Classification and specifications for
flooring grade laminates less than
2 mm thick intended for bonding to
supporting substrates
Stratifiés décoratifs haute pression (HPL, HPDL) — Plaques à base de
résines thermodurcissables (communément appelées stratifiés) —
Partie 5: Classification et spécifications des stratifiés pour revêtement
de sol d’épaisseur inférieure à 2 mm à être collés sur des supports
Reference number
ISO 4586-5:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 4586-5:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4586-5:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification, designation and coding . 2
5 Requirements . 3
5.1 Compliance . 3
5.2 Inspection requirements . 3
5.2.1 General. 3
5.2.2 Colour and pattern . 3
5.2.3 Surface finish . 3
5.2.4 Reverse side . 3
5.2.5 Visual inspection . 3
5.3 Dimensional tolerance requirements . 4
5.4 Test requirements . 4
5.4.1 General requirements . 4
5.4.2 Notes on requirements for reaction to fire . 6
Annex A (informative) Addendum relating to electrostatic properties . 7
Bibliography . 8
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 4586-5:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT), see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This first edition of ISO 4586-5:2015 cancels and replaces (ISO 4586-1:2004), which has been
technically revised.
ISO 4586 consists of the following parts, under the general title Plastics — High-Pressure Decorative
Laminates (HPL, HPDL) — Sheets based on Thermosetting Resins (Usually called Laminates):
— Part 1: Introduction and general Information
— Part 2: Determination of properties
— Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to
supporting substrates
— Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
— Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for
bonding to supporting substrates
— Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and
greater
— Part 7: Classification and specifications for design laminates
— Part 8: Classification and specifications for alternative core laminates
iv © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 4586-5:2015(E)
High-pressure decorative laminates (HPL, HPDL) — Sheets
based on thermosetting resins (Usually called Laminates) —
Part 5:
Classification and specifications for flooring grade
laminates less than 2 mm thick intended for bonding to
supporting substrates
1 Scope
This part of ISO 4586 applies to five classes of flooring grade laminates less than 2 mm thick intended
for bonding to supporting substrates, to produce HPL (HPDL) flooring elements. For laminate floor
[2]
covering applications they meet the surface property requirements specified in EN 13329 .
High-pressure decorative flooring laminates are characterized by their high resistance to abrasion,
aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to
clean and maintain.
The requirements in this document apply only to the high-pressure laminate, and additional properties
will need to be specified in order to define the functional performance of the finished flooring product.
ISO 4586-2 specifies the methods of test relevant to this part of ISO 4586.
In an effort to harmonize ISO 4586 with other High-Pressure Decorative Laminate standards, multiple
methods may be published that demonstrate similar properties. In these instances, the same test
method title is given and is annotated as either “Method A” or “Method B”. This is the case in the
following tests: Edge Squareness - 8/9, Dry Heat – 17/18 Dimensional Stability at Elevated Temperatures
- 19/20, Dimensional Stability at Ambient Temperature - 21/22, Staining - 30/31, Lightfastness - 32/33,
Cigarette Burns - 36/37, Formability - 38/39, and Blistering - 40/41. In these instances, either method
may be utilized in testing. Compliance to both methods is not required. While these tests are similar
they are by no means identical and results of one method do not necessarily correspond to the results
of the accompanying test. In these situations, consult the documentation in specific sections of ISO 4586
for performance requirements. Each specific method has performance requirements particular to that
method for individual grades of high-pressure decorative laminate.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 4586-2, High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 2: Determination of properties
ISO 10874, Resilient, textile and laminate floor coverings — Classification
ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion
method, liquid pyknometer method and titration method
© ISO 2015 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO 4586-5:2015(E)

3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
High-Pressure Decorative Compact Laminate(s)
HPL
HPDL
sheet(s) consisting of layers of cellulosic fibrous material (normally paper) impregnated with
thermosetting resins and bonded toge
...