ISO/IEC 14143-6:2012

Information technology — Software measurement — Functional size measurement — Part 6: Guide for use of ISO/IEC 14143 series and related International Standards

ISO/IEC 14143-6:2012 provides a summary of the FSM (Functional Size Measurement) related standards and the relationship between: a) the ISO/IEC 14143 series FSM framework standards that provide the definitions and concepts of FSM and conformance and verification of FSMMs (Functional Size Measurement Methods), and b) the ISO/IEC standard FSMMs, i.e. ISO/IEC 19761 (COSMIC), ISO/IEC 20926 (IFPUG), ISO/IEC 20968 (Mk II), ISO/IEC 24570 (NESMA), and ISO/IEC 29881 (FiSMA). An FSMM is a software sizing method that conforms to the mandatory requirements of ISO/IEC 14143-1. ISO/IEC 14143-6:2012 also provides a process to assist users to select an FSMM that meets their requirements. It also gives guidance on how to use Functional Size (FS). FSMMs include, but are not limited to, ISO/IEC 19761, ISO/IEC 20926, ISO/IEC 20968, ISO/IEC 24570, and ISO/IEC 29881 as well. Recommending a specific FSMM is outside the scope of ISO/IEC 14143-6:2012.

Technologies de l'information — Mesurage du logiciel — Mesurage de la taille fonctionnelle — Partie 6: Guide pour l'usage de la série ISO/CEI 14143 et des Normes internationales connexes

General Information

• Status: Published
• Publication Date: 25-Oct-2012
• ICS: 35.080 - Software
• Technical Committee: ISO/IEC JTC 1/SC 7 - Software and systems engineering
• Drafting Committee: ISO/IEC JTC 1/SC 7 - Software and systems engineering
• Current Stage: 9020 - International Standard under periodical review
• Start Date: 15-Jan-2024
• Completion Date: 15-Jan-2024

Relations

• Consolidated By: ISO 12870:2016 - Ophthalmic optics — Spectacle frames — Requirements and test methods
• Effective Date: 06-Jun-2022
• Revises: ISO/IEC 14143-6:2006 - Information technology — Software measurement — Functional size measurement — Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
• Effective Date: 30-Jul-2011

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 14143-6
Second edition
2012-11-01

Information technology — Software
measurement — Functional size
measurement
Part 6:
Guide for use of ISO/IEC 14143 series and
related International Standards
Technologies de l'information — Mesurage du logiciel — Mesurage de
la taille fonctionnelle
Partie 6: Guide pour l'usage de la série ISO/CEI 14143 et des Normes
internationales connexes




Reference number
ISO/IEC 14143-6:2012(E)
©
ISO/IEC 2012

---------------------- Page: 1 ----------------------
ISO/IEC 14143-6:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 14143-6:2012(E)
Contents Page
Foreword . iv
Introduction . v
1  Scope . 1
2  Abbreviated terms . 1
3  FSM related standards (ISO/IEC 14143 series), FSMM standards, and their
interrelationships . 2
3.1  Outlines of FSM related standards . 2
3.2  Outlines of standardized FSMMs . 4
3.3  Relationship between FSM related standards . 6
3.4  Guidelines for usage of FSM related standards . 8
4  Use of FSM and FS . 8
4.1  Overview . 8
4.2  Project management . 9
4.3  Performance management . 10
5  FSMM selection and development processes . 10
5.1  Outline . 10
5.2  Process to select a suitable FSMM . 11
5.3  FSMM development process . 13
Annex A (Informative) Scope of FSM related standards . 15
A.1  ISO/IEC 14143 series . 15
A.2  ISO/IEC International Standards of FSMMs . 17
Bibliography . 21


© ISO/IEC 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 14143-6:2012(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to
...