ISO/IEC 18328-4:2018

Identification cards — ICC-managed devices — Part 4: Test methods for logical characteristics

This document specifies the test methods used for conformity testing, to determine whether an ICC with at least one ICC-managed device is considered to conform with the specifications of ISO/IEC 18328-3, e.g. device management and device handling.

Cartes d'identification — Dispositifs contrôlés par carte à circuit intégré (ICC) — Partie 4: Titre manque

General Information

• Status: Published
• Publication Date: 12-Jun-2018
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 4 - Generic interfaces and protocols for security devices
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 03-Oct-2023

Relations

• Consolidated By: ISO 12543-3:2021 - Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 18328-4
First edition
2018-06
Identification cards — ICC-managed
devices —
Part 4:
Test methods for logical
characteristics
Cartes d'identification — Dispositifs contrôlés par carte à circuit
intégré (ICC) —
Partie 4: Titre manque
Reference number
ISO/IEC 18328-4:2018(E)
©
ISO/IEC 2018

---------------------- Page: 1 ----------------------
ISO/IEC 18328-4:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 18328-4:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Abbreviated terms .1
5 Test design .1
5.1 General . 1
5.2 Device under test (DUT) . 2
5.3 Test unit . . 2
5.4 Test case . 2
5.5 Test report . 4
6 Test methods . 4
6.1 General test requirements . 4
6.1.1 Preconditions for testing . 4
6.1.2 Test setup . 4
6.2 List of test cases . 4
6.3 Test unit Idle .
...

© ISO/IEC 2018 – All rights reserved
ISO/IEC TC JTC 1/SC 17
Date:  2018-04-17
ISO/IEC 18328-4:2018(E)
Secretariat:  BSI
Identification cards — ICC-managed devices — Part 4: Test methods for logical
characteristics
Cartes d'identification — Dispositifs contrôlés par carte à circuit intégré (ICC) —
Partie 4: Titre manque
Warning
This document is not an ISO International Standard. It is distributed for review and
comment. It is subject to change without notice and may not be referred to as an
International Standard.
Recipients of this draft are invited to submit, with their comments, notification of any
relevant patent rights of which they are aware and to provide supporting
documentation.
Document type:  International StandardInternational Standard
Document subtype:
Document stage:  (40) Enquiry
Document language:  EE

X:\IDT\Digitale Technologien\TG_ITS\NA043\NA043_Sekretariate\JTC1_SC17_WG4\Projekte\18328-
4\DIS\ISO_IEC_DIS_18328-4_Test_methods_for_logical_characteristics_test.docx STD Version 2.8l

---------------------- Page: 1 ----------------------
ISO/IEC DIS 18328-4:2018(E)
COPYRIGHT PROTECTED DOCUMENT
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or
utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be
requested from either ISO at the address below or ISO’s member body in the country of the
requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
[e-mail]
www.iso.org
ii © ISO/IEC 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC DIS 18328-4:2018(E)
Contents Page
Foreword .5 Field Code Changed
Introduction .6 Field Code Changed
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 11
4 Abbreviated terms . 11
5 Test design . 22
5.1 General . 22
5.2 Device under test (DUT) . 22
5.3 Test unit . 22
5.4 Test case . 22
5.5 Test report . 44
6 Test methods . 55
6.1 General test requirements .5
Field Code Changed
6.1.1 Preconditions for testing .5
Field Code Changed
6.1.2 Test setup .5
Field Code Changed
6.2 List of test cases . 55
6.3 Test unit Idle. 66
6.3.1
...