ISO/IEC/IEEE 8802-1AC:2018/Amd 1:2023
(Amendment)Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AC: Media access control (MAC) service definition — Amendment 1: Support for ISO/IEC/IEEE 8802-15-3
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1AC: Media access control (MAC) service definition — Amendment 1: Support for ISO/IEC/IEEE 8802-15-3
Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Partie 1AC: Définition du service de contrôle d'accès au support (MAC) — Amendement 1: Support pour l'ISO/IEC/IEEE 8802-15-3
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/
STANDARD IEC/IEEE
8802-1AC
First edition
2018-04
AMENDMENT 1
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Part 1AC:
Media access control (MAC) service
definition
AMENDMENT 1: Support for ISO/IEC/
IEEE 8802-15-3
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Partie 1AC: Définition du service de contrôle d'accès au support (MAC)
AMENDEMENT 1: Support pour l'ISO/IEC/IEEE 8802-15-3
Reference number
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
© IEEE 2021
---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii
© IEEE 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted. (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-1AC:2018/Amd.1 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE Std 802.1ACct-2021) and drafted in accordance with its editorial rules. It was adopted, under the
“fast-track procedure” defined in the Partner Standards Development Organization cooperation
agreement between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
IEEE Std 802.1ACct™-2021
(Amendment to EEE Std 802.1AC™-2016
as amended by IEEE Std 802.1AC-2016/Cor 1-2018)
IEEE Standard for
Local and Metropolitan Area networks—
Media Access Control (MAC)
Service Definition
Amendment 1: Support for
IEEE Std 802.15.3
Developed by the
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 8 December 2021
IEEE SA Standards Board
---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
Abstract: The Internal Sublayer Service for the IEEE 802.15.3 MAC entity is defined in this
amendment.
Keywords: ad-hoc network, IEEE 802.1AC, IEEE 802.15.3, Internal Sublayer Service, multi-media,
wireless
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2021 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 17 December 2021. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and
Electronics Engineers, Incorporated.
PDF: ISBN 978-1-5044-8216-5 STD25119
Print: ISBN 978-1-5044-8217-2 STDPD25119
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.
---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE Standards documents are made available for use subject to important notices and legal disclaimers.
These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html),
appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning
IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standard s
through an accredited consensus development process, which brings together volunteers representing varied
viewpoints and interests to achieve the final product. IEEE Standards are documents developed by
volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers
are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While
IEEE administers the process and establishes rules to promote fairness in the consensus developmen t
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE makes no warranties or representations concerning its standards, and expressly disclaims all
warranties, express or implied, concerning this standard, including but not limited to the warranties o f
merchantability, fitness for a particular purpose and non-infringement. In addition, IEEE does not warrant or
represent that the use of the material contained in its standards is free from patent infringement. IEEE
standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related t o
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE
NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
3
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the even t
that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE
standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter's views should be considered the personal views of that individual rather than
the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together wit h
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of
interests. For this reason, IEEE and the members of its Societies and Standards Coordinating Committees
are not able to provide an instant response to comments, or questions except in those cases where the matter
has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any
person who would like to participate in evaluating comments or in revisions to an IEEE standard is welcome
to join the relevant IEEE working group. You can indicate interest in a working group using the Interests tab
1
in the Manage Profile & Interests area of the IEEE SA myProject system. An IEEE Account is needed to
access the application.
2
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
1
Available at: https://development.standards.ieee.org/myproject-web/public/view.html#landing.
2
Available at: https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html.
4
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2023(E)
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400;
https://www.copyright.com/. Permission to photocopy portions of any individual standard for educational
classroom use can also be obtained through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that
...
FINAL
AMENDMENT ISO/IEC/IEEE
DRAFT
8802-
1AC:2018
FDAM 1
First edition
2018-04
AMENDMENT 1
ISO/IEC JTC 1/SC 6
Information technology —
Secretariat: KATS
Telecommunications and information
Voting begins on:
2022-11-04 exchange between systems — Local
and metropolitan area networks —
Voting terminates on:
2023-03-24
Part 1AC:
Media access control (MAC) service
definition
AMENDMENT 1: Support for ISO/IEC/
IEEE 8802-15-3
This document is circulated as received from the committee secretariat.
FAST TRACK PROCEDURE
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE 8802-1AC:2018/FDAM
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
1:2022(E)
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/FDAM 1:2022(E)
FINAL
AMENDMENT ISO/IEC/IEEE
DRAFT
8802-
1AC:2018
FDAM 1
First edition
2018-04
AMENDMENT 1
ISO/IEC JTC 1/SC 6
Information technology —
Secretariat: KATS
Telecommunications and information
Voting begins on:
exchange between systems — Local
and metropolitan area networks —
Voting terminates on:
Part 1AC:
Media access control (MAC) service
definition
AMENDMENT 1: Support for ISO/IEC/
IEEE 8802-15-3
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
FAST TRACK PROCEDURE
© IEEE 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
Institute of Electrical and Electronics Engineers, Inc
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
3 Park Avenue, New York
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
NY 10016-5997, USA
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: stds.ipr@ieee.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE 8802-1AC:2018/
Website: www.ieee.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
FDAM 1:2022(E)
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© IEEE 2022 – All rights reserved
NATIONAL REGULATIONS. © IEEE 2021
---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2022(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted. (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-1AC:2018/Amd.1 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE Std 802.1ACct-2021) and drafted in accordance with its editorial rules. It was adopted, under the
“fast-track procedure” defined in the Partner Standards Development Organization cooperation
agreement between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
IEEE Std 802.1ACct™-2021
(Amendment to EEE Std 802.1AC™-2016
as amended by IEEE Std 802.1AC-2016/Cor 1-2018)
IEEE Standard for
Local and Metropolitan Area networks—
Media Access Control (MAC)
Service Definition
Amendment 1: Support for
IEEE Std 802.15.3
Developed by the
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 8 December 2021
IEEE SA Standards Board
---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2022(E)
Abstract: The Internal Sublayer Service for the IEEE 802.15.3 MAC entity is defined in this
amendment.
Keywords: ad-hoc network, IEEE 802.1AC, IEEE 802.15.3, Internal Sublayer Service, multi-media,
wireless
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2021 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 17 December 2021. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and
Electronics Engineers, Incorporated.
PDF: ISBN 978-1-5044-8216-5 STD25119
Print: ISBN 978-1-5044-8217-2 STDPD25119
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.
---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE Standards documents are made available for use subject to important notices and legal disclaimers.
These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html),
appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning
IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standard s
through an accredited consensus development process, which brings together volunteers representing varied
viewpoints and interests to achieve the final product. IEEE Standards are documents developed by
volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers
are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While
IEEE administers the process and establishes rules to promote fairness in the consensus developmen t
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE makes no warranties or representations concerning its standards, and expressly disclaims all
warranties, express or implied, concerning this standard, including but not limited to the warranties o f
merchantability, fitness for a particular purpose and non-infringement. In addition, IEEE does not warrant or
represent that the use of the material contained in its standards is free from patent infringement. IEEE
standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related t o
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE
NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
3
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2022(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the even t
that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE
standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter's views should be considered the personal views of that individual rather than
the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together wit h
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of
interests. For this reason, IEEE and the members of its Societies and Standards Coordinating Committees
are not able to provide an instant response to comments, or questions except in those cases where the matter
has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any
person who would like to participate in evaluating comments or in revisions to an IEEE standard is welcome
to join the relevant IEEE working group. You can indicate interest in a working group using the Interests tab
1
in the Manage Profile & Interests area of the IEEE SA myProject system. An IEEE Account is needed to
access the application.
2
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
1
Available at: https://development.standards.ieee.org/myproject-web/public/view.html#landing.
2
Available at: https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html.
4
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-1AC:2018/Amd.1:2022(E)
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400;
https://www.copyright.com/. Permission to photocopy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.