ISO 1917:1972
(Main)Hydrated sodium perborates for industrial use — Determination of sodium oxide, boric oxide and available oxygen contents — Volumetric methods
Hydrated sodium perborates for industrial use — Determination of sodium oxide, boric oxide and available oxygen contents — Volumetric methods
Determination of the sodium oxide content by addition of an excess of a solution of hydrochloric acid and back titration with a standard volumetric solution of sodium hydroxide in presence of methyl red/bromocresol green as indicator. Subsequent titration of the boric oxide with the standard volumetric solution of sodium hydroxide in the presence of mannitol or sorbitol, using phenolphthalein as indicator. Determination of the available oxygen content in a test portion by titration in acid solution with a standard volumetric potassium permanganate solution. The equation for the reaction involved in the determination of available oxygen is given.
Perborates de sodium hydratés à usage industriel — Détermination des teneurs en oxyde de sodium, en oxyde borique et en oxygène actif — Méthodes volumétriques
General Information
Buy Standard
Standards Content (Sample)
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee, International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 1917 was drawn up by Technical Committee
ISOITC 47, Chemistry.
It was approved in July 1970 by the Member Bodies of the following countries:
Australia Hungary Romania
Belgium India South Africa, Rep. of
Chile Israel Spain
Czechoslovakia Japan Switzerland
Netherlands Thailand
Egypt, Arab Rep. of
France New Zealand Turkey
Germany Poland United Kingdom
Greece Portugal U.S.S.R.
No Member Body expressed disapproval of the document.
0 International Organization for Standardization, 1972 l
Printed in Switzerland
---------------------- Page: 1 ----------------------
IS0 19174972 (E)
INTERNATIONAL STANDARD
Hydrated sodium perborates for industrial use -
Determination of sodium oxide, boric oxide and available
oxygen contents - Volumetric methods
1 SCOPE AND FIELD OF APPLICATION
4.3 Sulphuric acid, approximately 4 N solution.
4.4 Sodium hydroxide, 0.5 N standard volumetric solu-
This International Standard specifies volumetric methods
tion, free from carbonate.
for the determination of the sodium oxide, boric oxide and
available oxygen contents of hydrated sodium perborates
4.5 Potassium permanganate, 0.1 N standard volumetric
for industrial use.
solution.
4.6 Screened methyl red, indicator solution.
2 PRINCIPLE
Dissolve 0.01 g of methyl red and 0.01 g of bromocresol
green in 95 % (V/V) ethanol and dilute to 100 ml with the
Determination of the sodium oxide content by addition
same ethanol.
of an excess of a solution of hydrochloric acid and back
titration with a standard volumetric solution of sodium
4.7 Phenolphthalein, 10 g/l ethanolic solution.
hydroxide, using screened methyl red as indicator.
Dissolve 1 g of phenolphthalein in 95 % (V/V) ethanol,
Subsequent titration of the boric oxide with the standard
dilute to 100 ml with the same ethanol and add 0.02 N
volumetric solution of sodium hydroxide in the presence
sodium hydroxide solution until the first appearance of a
of mannitol or sorbitol, using phenolphthalein as indicator.
pink colour.
Determination of the available oxygen content by titration
in acid solution with a standard volumetric potassium
permanganate solution.
5 APPARATUS
Ordinary laboratory apparatus.
3 REACTION
The reaction involved in the determination of available
6 SAMPLING
oxygen is the following:
Follow the principles described in IS0 . . .I).
+ 6i-i’ + 50=2Mn2+ + 50, + 3&o
2 Mn04-
7 PROCEDURE
7.1 Determination of sodium oxide and boric oxide
’ contents
4 REAGENTS
7.1.1 Test portion
Distilled water or water of equivalent purity, free from
Weigh, to the nearest 0.000 5 g, 2 g of sodium perborate
carbon dioxide, shall be used in the test.
tetrahydrate or 1.5 g of sodium perborate monohydrate.
4.1 Mannitol, neutral, or alternatively sorbitol, neutral.
7.1.2 Determination of sodium oxide content
These products shall satisfy the following condition:
Dissolve the test portion (7.1.1). in about 100 ml of water
5.0 g, dissolved in 50 ml of carbon dioxide-free water, and add 0.4 ml of the screened methyl red indicator solu-
tion (4.6). Add 25.0 ml of the hydrochloric acid solution
requires for neutralization not more than 0.3 ml of 0.02 N
sodium hydroxid
...
NORME INTERNATIONALE
INTERNATIONAL (-jRGANIZATI()N F()R STANDARDIZATI(-)N .MExfiyHAl’(>flHAA OPl-AHM3AUM5l no CTAHRAPTM3AUMM *ORGANISATION INTERNATIONALE DE NORMALISATION
Perborates de sodium hydratés à usage industriel -
Détermination des teneurs en oxyde de sodium, en oxyde
borique et en oxygène actif - Méthodes volumétriques
Première édition - 1972 -05 -15
Réf. No : ISO 1917-1972 (F)
CDU 661.652 -: 543
Descripteurs : oxyde borique, analyse chimique, dosage, oxygène, borate de sodium, oxyde de sodium, analyse volumétrique.
Prix basé sur 2 pages
---------------------- Page: 1 ----------------------
AVANT-PROPOS
ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 1917 a été établie par le Comité Technique
ISOBC 47, Chimie.
Elle fut approuvée en juillet 1970 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ Grèce Portugal
Allemagne Hongrie Roumanie
Australie Inde Royaume-Uni
Belgique Israël Suisse
Chili Japon Tchécoslovaquie
Nouvelle-Zélande Thaïlande
Egypte, Rép. arabe d’
Espagne Pays-Bas Turquie
France Pologne U.R.S.S.
Aucun Comité Membre n’a désapprouvé le document.
0 Organisation Internationale de Normalisation, 1972 l
Imprimé en Suisse
---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 19174972 (F)
Perborates de sodium hydratés à usage industriel -
Détermination des teneurs en oxyde de sodium, en oxyde
actif - Méthodes volumétriques
borique et en oxygène
4.3 Acide sulfurique, solution environ 4 N.
1 OBJET ET DOMAINE D’APPLICATION
4.4 Hydroxyde de sodium, solution titrée 0,s N, exempte
méthodes vo-
La présente Norme Internationale fixe des
de carbonate.
lumétriques de détermination des teneurs en oxyde de SO-
dium, en oxyde borique et en oxygène actif, dans les per-
4.5 Permanganate de potassium, solution titrée 0,l N.
borates de sodium hydratés à usage industriel.
4.6 Rouge de méthyle, indicateur mixte.
2 PRINCIPE Dissoudre 0,Ol g de rouge de méthyle et 0,Ol g de vert de
bromocrésol dans de l’éthanol à 95 % (V/V) et diluer a
100 ml avec le même éthanol.
Détermination de la teneur en oxyde de sodium par addi-
tion d’un excès d’une solution d’acide chlorhydrique et
4.7 Phénolphtaléine, solution éthanolique a 10 g/l.
titrage en retour à l’aide d’une solution titrée d’hydroxyde
de sodium, en présence d’un indicateur mixte au rouge de
Dissoudre 1 g de phénolphtaléine dans de I’éthanol à 95 %
méthyle.
(v/v)# diluer à 100 ml avec le même éthanol, et ajouter
une solution d’hydroxyde de sodium 0,02 N jusqu’à la
Titrage ultérieur de l’oxyde borique à l’aide d’une solution
première apparition d’une coloration rose.
titrée d’hydroxyde de sodium,en présence de mannitol ou
de sorbitol et de phénolphtaléine comme indicateur.
Détermination de la teneur en oxygène actif par titrage, en
5 APPAREILLAGE
solution acide, à l’aide d’une solution titrée de permanganate
de potassium.
Matériel courant de laboratoire.
3 RÉACTION
La réaction mise en oeuvre pour la détermination de I’oxy-
6 ÉCHANTILLONNAGE
gène actif est la suivante :
Suivre les principes définis en ISO . .?
2 Mn04- i- 6H+ i- 50=2Mn2+ -k 502 -k 3&C
7 MODE OPÉRATOIRE
4 RÉACTIFS
7.1 Détermination de la teneur en oxyde de sodium et en
oxyde borique
Au cours de l’analyse, n’utiliser que de l’eau distillée ou de
7.1 .l Prise d’essai
l’eau de pureté équivalente, exempte de dioxyde de car-
bone.
Peser à 0,000 5 g près, 2 g de perborate de sodium tétra-
hydraté ou 1,5 g de perborate de sodium monohydraté.
4.1 Mannitol neutre ou sorbitol neutre.
Ces produits doivent satisfaire à la condition ci-après :
7.1.2 Détermination de l’oxyde de sodium
la neutralisation d’une solution de 5,0 g dans 50 ml d’eau
Dissoudre la prise d’essai (7.1 .l) dans environ 100 ml d’eau
exempte de dioxyde de carbone, ne doit pas exiger plus
...
NORME INTERNATIONALE
INTERNATIONAL (-jRGANIZATI()N F()R STANDARDIZATI(-)N .MExfiyHAl’(>flHAA OPl-AHM3AUM5l no CTAHRAPTM3AUMM *ORGANISATION INTERNATIONALE DE NORMALISATION
Perborates de sodium hydratés à usage industriel -
Détermination des teneurs en oxyde de sodium, en oxyde
borique et en oxygène actif - Méthodes volumétriques
Première édition - 1972 -05 -15
Réf. No : ISO 1917-1972 (F)
CDU 661.652 -: 543
Descripteurs : oxyde borique, analyse chimique, dosage, oxygène, borate de sodium, oxyde de sodium, analyse volumétrique.
Prix basé sur 2 pages
---------------------- Page: 1 ----------------------
AVANT-PROPOS
ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 1917 a été établie par le Comité Technique
ISOBC 47, Chimie.
Elle fut approuvée en juillet 1970 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ Grèce Portugal
Allemagne Hongrie Roumanie
Australie Inde Royaume-Uni
Belgique Israël Suisse
Chili Japon Tchécoslovaquie
Nouvelle-Zélande Thaïlande
Egypte, Rép. arabe d’
Espagne Pays-Bas Turquie
France Pologne U.R.S.S.
Aucun Comité Membre n’a désapprouvé le document.
0 Organisation Internationale de Normalisation, 1972 l
Imprimé en Suisse
---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 19174972 (F)
Perborates de sodium hydratés à usage industriel -
Détermination des teneurs en oxyde de sodium, en oxyde
actif - Méthodes volumétriques
borique et en oxygène
4.3 Acide sulfurique, solution environ 4 N.
1 OBJET ET DOMAINE D’APPLICATION
4.4 Hydroxyde de sodium, solution titrée 0,s N, exempte
méthodes vo-
La présente Norme Internationale fixe des
de carbonate.
lumétriques de détermination des teneurs en oxyde de SO-
dium, en oxyde borique et en oxygène actif, dans les per-
4.5 Permanganate de potassium, solution titrée 0,l N.
borates de sodium hydratés à usage industriel.
4.6 Rouge de méthyle, indicateur mixte.
2 PRINCIPE Dissoudre 0,Ol g de rouge de méthyle et 0,Ol g de vert de
bromocrésol dans de l’éthanol à 95 % (V/V) et diluer a
100 ml avec le même éthanol.
Détermination de la teneur en oxyde de sodium par addi-
tion d’un excès d’une solution d’acide chlorhydrique et
4.7 Phénolphtaléine, solution éthanolique a 10 g/l.
titrage en retour à l’aide d’une solution titrée d’hydroxyde
de sodium, en présence d’un indicateur mixte au rouge de
Dissoudre 1 g de phénolphtaléine dans de I’éthanol à 95 %
méthyle.
(v/v)# diluer à 100 ml avec le même éthanol, et ajouter
une solution d’hydroxyde de sodium 0,02 N jusqu’à la
Titrage ultérieur de l’oxyde borique à l’aide d’une solution
première apparition d’une coloration rose.
titrée d’hydroxyde de sodium,en présence de mannitol ou
de sorbitol et de phénolphtaléine comme indicateur.
Détermination de la teneur en oxygène actif par titrage, en
5 APPAREILLAGE
solution acide, à l’aide d’une solution titrée de permanganate
de potassium.
Matériel courant de laboratoire.
3 RÉACTION
La réaction mise en oeuvre pour la détermination de I’oxy-
6 ÉCHANTILLONNAGE
gène actif est la suivante :
Suivre les principes définis en ISO . .?
2 Mn04- i- 6H+ i- 50=2Mn2+ -k 502 -k 3&C
7 MODE OPÉRATOIRE
4 RÉACTIFS
7.1 Détermination de la teneur en oxyde de sodium et en
oxyde borique
Au cours de l’analyse, n’utiliser que de l’eau distillée ou de
7.1 .l Prise d’essai
l’eau de pureté équivalente, exempte de dioxyde de car-
bone.
Peser à 0,000 5 g près, 2 g de perborate de sodium tétra-
hydraté ou 1,5 g de perborate de sodium monohydraté.
4.1 Mannitol neutre ou sorbitol neutre.
Ces produits doivent satisfaire à la condition ci-après :
7.1.2 Détermination de l’oxyde de sodium
la neutralisation d’une solution de 5,0 g dans 50 ml d’eau
Dissoudre la prise d’essai (7.1 .l) dans environ 100 ml d’eau
exempte de dioxyde de carbone, ne doit pas exiger plus
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.