ISO/IEC 9075-13:2023

Information technology — Database languages SQL — Part 13: SQL Routines and types using the Java TM programming language (SQL/JRT)

ISO/IEC 9075-13:2016 specifies the ability to invoke static methods written in the Java? programming language as SQL-invoked routines and to use classes defined in the Java programming language as SQL structured user-defined types. (Java is a registered trademark of Oracle Corporation and/or its affiliates.)

Technologies de l'information — Langages de base de données SQL — Partie 13: Routines et types de SQL utilisant le langage de programmation Java TM (SQL/JRT)

General Information

• Status: Published
• Publication Date: 31-May-2023
• ICS: 35.060 - Languages used in information technology
• Technical Committee: ISO/IEC JTC 1/SC 32 - Data management and interchange
• Drafting Committee: ISO/IEC JTC 1/SC 32 - Data management and interchange
• Current Stage: 6060 - International Standard published
• Start Date: 01-Jun-2023
• Due Date: 15-Sep-2023
• Completion Date: 01-Jun-2023

Relations

• Revises: ISO/IEC 9075-13:2016/Cor 2:2022 - Information technology — Database languages — SQL — Part 13: SQL Routines and types using the Java TM programming language (SQL/JRT) — Technical Corrigendum 2
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 9075-13
Fifth edition
2023-06
Information technology — Database
languages SQL —
Part 13:
SQL Routines and types using the Java
TM programming language (SQL/
JRT)
Technologies de l'information — Langages de base de données SQL
—
Partie 13: Routines et types de SQL utilisant le langage de
programmation Java TM (SQL/JRT)
Reference number
ISO/IEC 9075-13:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 9075-13:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
© ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC9075-13:2023(E)
Contents Page
Foreword.vii
Introduction.ix
1 Scope.1
2 Normativereferences.2
3 Termsanddefinitions.3
4 Concepts.6
4.1 Notationsandconventions.6
4.1.1 Notations.6
4.1.2 Specificationofbuilt-inprocedures.6
4.1.3 Specificationofdeploymentdescriptorfiles.6
4.2 Javaprogramminglanguage.7
4.3 SQL-invokedroutines.8
4.3.1 CharacteristicsofSQL-invokedroutines.8
4.4 Javaclassnameresolution.9
4.5 SQLresultsets.10
4.6 Parameter mapping.10
4.7 UnhandledJavaexceptions.11
4.8 Data types.11
4.8.1 Hostlanguagedatatypes.11
4.9 User-defined types.12
4.9.1 Introductiontouser-definedtypes.12
4.9.2 User-definedtypecomparisonandassignment.13
4.9.3 User-definedtypedescriptor.13
4.9.4 Accessingstaticfields.14
4.9.5 ConvertingobjectsbetweenSQLandJava.15
4.9.5.1 IntroductiontoconversionofobjectsbetweenSQLandJava.15
4.9.5.2 SERIALIZABLE.15
4.9.5.3 SQLDATA.15
4.9.5.4 Developingforportability.16
4.10 Built-inprocedures.16
4.11 Basicsecuritymodel.16
4.11.1 Privileges.16
4.12 JARs.17
4.12.1 IntroductiontoJARs.17
4.12.2 Deploymentdescriptorfiles.17
5 Lexicalelements.19
5.1 and.19
5.2 Namesandidentifiers.20
©ISO/IEC2023–Allrightsreserved iii

---------------------- Page: 3 ----------------------
ISO/IEC9075-13:2023(E)
6 Scalarexpressions.22
6.1 .22
6.2 .23
7 Predicates.24
7.1 .24
8 Additionalcommonrules.26
8.1 InvokinganSQL-invokedroutine.26
8.2 Executionofarray-returningfunctions.35
9 Additionalcommonelements.42
9.1 .42
9.2 .43
9.3 .44
9.4 .46
9.5 Javaroutinesignaturedetermination.47
10 Schemadefinitionandmanipulation.55
10.1 .55
10.2 .56
10.3 .57
10.4 .58
10.5 .62
10.6 .65
10.7 .66
10.8 .67
10.9 .70
10.10 .71
10.11 .72
10.12 .73
11 Accesscontrol.74
11.1 .74
11.2 .75
11.3 .76
12 Built-inprocedures.77
12.1 SQLJ.INSTALL_JAR procedure.77
12.2 SQLJ.REPLACE_JARprocedure.79
12.3 SQLJ.REMOVE_JAR procedure.81
12.4 SQLJ.ALTER_JAVA_PATHprocedure.83
13 Javatopics.85
13.1 Javafacilitiessupportedbythisdocument.85
13.1.1 Packagejava.sql.85
13.1.2 Systemproperties.85
13.2 Deploymentdescriptorfiles.86
14 InformationSchema.89
14.1 InformationSchemadigitalartifact.89
14.2 JAR_JAR_USAGE view.89
14.3 JARSview.90
iv ©ISO/IEC2023–Allrightsreserved

---------------------- Page: 4 ----------------------
ISO/IEC9075-13:2023(E)
14.4 METHOD_SPECIFICATIONSview.91
14.5 ROUTINE_JAR_USAGE view.92
14.6 TYPE_JAR_USAGEview.93
14.7 USER_DEFINED_TYPESview.94
14.8 Shortnameviews.95
15 DefinitionSchema.96
15.1 DefinitionSchemadigitalartifact.96
15.2 JAR_JAR_USAGEbasetable.96
15.3 JARSbasetable.98
15.4 METHOD_SPECIFICATIONSbasetable.99
15.5 ROUTINE_JAR_USAGEbasetable.101
15.6 ROUTINESbasetable.102
15.7 TYPE_JAR_USAGEbasetable.103
15.8 USAGE_PRIVILEGESbasetable.104
15.9 USER_DEFINED_TYPESbasetable.105
16 Statuscodes.107
16.1 SQLSTATE.107
17 Conformance.108
17.1 ClaimsofconformancetoSQL/JRT.108
17.2 AdditionalconformancerequirementsforSQL/JRT.108
17.3 ImpliedfeaturerelationshipsofSQL/JRT.108
AnnexA(informative) SQLconformancesummary.109
AnnexB(informative) Implementation-defined elements.115
AnnexC(informative) Implementation-dependent elements.121
AnnexD(informative) SQLoptionalfeaturetaxonomy.123
AnnexE(informative) Deprecatedfeatures.125
AnnexF(informative) IncompatibilitieswithISO/IEC9075:2016.126
AnnexG(informative) DefectReportsnotaddressedinthiseditionofthisdocument.127
Bibliography.128
Index.129
©ISO/IEC2023–Allrightsreserved v

---------------------- Page: 5 ----------------------
ISO/IEC9075-13:2023(E)
Tables
Table Page
1 Standardprogramminglanguages.42
2 System properties.85
3 SQLSTATEclassandsubclasscodes.107
4 ImpliedfeaturerelationshipsofSQL/JRT.108
A.1 FeaturedefinitionsoutsideofConformanceRules.109
D.1 Featuretaxonomyforoptionalfeatures.123
vi ©ISO/IEC2023–Allrightsreserved

---------------------- Page: 6 ----------------------
ISO/IEC 9075-13:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Com-
mission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, govern-
mental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are de-
scribed in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the dif-
ferent types of document should be noted. This document was drafted in accordance with the editorial
rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/ref-
docs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC have
not received notice of (a) patent(s) which may be required to implement this document. However, imple-
menters are cautioned that this may not represent the latest information, which may be obtained from
the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be
held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expres-
sions related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/fore-
word.html. In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Sub-
committee SC 32, Data management and interchange.
This fifth edition cancels and replaces the fourth edition (ISO/IEC 9075-13:2016), which has been tech-
nically revised. It also incorporates the Technical Corrigenda ISO/IEC 9075-13:2016/Cor.1:2019 and
ISO/IEC 9075-13:2016/Cor.2:2022.
The main changes are as follows:
— improve the presentation and accuracy of the summaries of implementation-defined and implemen-
tation-dependent aspects of this document;
— introduction of several digital artifacts;
— alignment with updated ISO house style and other guidelines for creating standards.
This fifth edition of ISO/IEC 9075-13 is designed to be used in conjunction with the following editions of
other parts of the ISO/IEC 9075 series, all published in 2023:
— ISO/IEC 9075-1, sixth edition;
— ISO/IEC 9075-2, sixth edition;
© ISO/IEC 2023 – All rights reserved vii

---------------------- Page: 7 ----------------------
ISO/IEC 9075-13:2023(E)
— ISO/IEC 9075-3, sixth edition;
— ISO/IEC 9075-4, seventh edition;
— ISO/IEC 9075-9, fifth edition;
— ISO/IEC 9075-10, fifth edition;
— ISO/IEC 9075-11, fifth edition;
— ISO/IEC 9075-14, sixth edition;
— ISO/IEC 9075-15, second edition;
— ISO/IEC 9075-16, first edition.
A list of all parts in the ISO/IEC 9075 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.

viii © ISO/IEC 2023 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/IEC9075-13:2023(E)
Introduction
Theorganizationofthisdocumentisasfollows:
1) Clause1,“Scope”,specifiesthescopeofthisdocument.
2) Clause2,“Normativereferences”,identifiesadditionalstandardsthat,throughreferenceinthis
document,constituteprovisionsofthisdocument.
3) Clause3,“Termsanddefinitions”,definesthetermsanddefinitionsusedinthisdocument.
4) Clause4,“Concepts”,presentsconceptsusedinthedefinitionofJavaroutinesandtypes.
5) Clause5,“Lexicalelements”,definesanumberoflexicalelementsusedinthedefinitionofJava
routinesandtypes.
6) Clause6,“Scalarexpressions”,definestheelementsofthelanguagethatproducescalarvalues.
7) Clause7,“Predicates”,definesthepredicatesofthelanguage.
8) Clause8,“Additionalcommonrules”,specifiestherulesforassignmentsthatretrievedatafromor
storedataintoSQL-data,andformationrulesforsetoperations.
9) Clause9,“Additionalcommonelements”,definesadditionallanguageelementsthatareusedin
variouspartsofthelanguage.
10) Clause10,“Schemadefinitionandmanipulation”,definestheschemadefinitionandmanipulation
statementsassociatedwiththedefinitionofJavaroutinesandtypes.
11) Clause11,“Accesscontrol”,definesfacilitiesforcontrollingaccesstoSQL-data.
12) Clause12,“Built-inprocedures”,definesnewbuilt-inproceduresusedinthedefinitionofJava
routinesandtypes.
13) Clause13,“Javatopics”,definesthefacilitiessupportedbyimplementationsofthisdocumentand
theconventionsusedindeploymentdescriptorfiles.
14) Clause14,“InformationSchema”,definesviewedtablesthatcontainschemainformation.
15) Clause15,“DefinitionSchema”,definesbasetablesonwhichtheviewedtablescontainingschema
informationdepend.
16) Clause16,“Statuscodes”,definesSQLSTATEvaluesrelatedtoJavaroutinesandtypes.
17) Clause17,“Conformance”,definesthecriteriaforconformancetothisdocument.
18) AnnexA,“SQLconformancesummary”,isaninformativeAnnex.Itsummarizestheconformance
requirementsoftheSQLlanguage.
19) AnnexB,“Implementation-definedelements”,isaninformativeAnnex.Itliststhosefeaturesfor
whichthebodyofthisdocumentstatesthatthesyntax,themeaning,thereturnedresults,theeffect
onSQL-dataand/orschemas,orotheraspectispartlyorwhollyimplementation-defined.
20) AnnexC,“Implementation-dependentelements”,isaninformativeAnnex.Itliststhosefeaturesfor
whichthebodyofthisdocumentstatesthatthesyntax,themeaning,thereturnedresults,theeffect
onSQL-dataand/orschemas,orotheraspectispartlyorwhollyimplementation-dependent.
21) AnnexD,“SQLoptionalfeaturetaxonomy”,isaninformativeAnnex.Itidentifiestheoptionalfeatures
oftheSQLlanguagespecifiedinthisdocumentbyanidentifierandashortdescriptivename.This
taxonomyisusedtospecifyconformance.
©ISO/IEC2023–Allrightsreserved ix

---------------------- Page: 9 ----------------------
ISO/IEC9075-13:2023(E)
22) AnnexE,“Deprecatedfeatures”,isaninformativeAnnex.Itlistsfeaturesthattheresponsible
TechnicalCommitteeintendsnottoincludeinafutureeditionofthisdocument.
23) AnnexF,“IncompatibilitieswithISO/IEC9075:2016”,isaninformativeAnnex.Itlistsincompatib-
ilitieswiththepreviouseditionofthisdocument.
24) AnnexG,“DefectReportsnotaddressedinthiseditionofthisdocument”,isaninformativeAnnex.
ItdescribestheDefectReportsthatwereknownatthetimeofpublicationofthisdocument.Each
oftheseproblemsisaproblemcarriedforwardfromthepreviouseditionoftheISO/IEC9075
series.Nonewproblemshavebeencreatedinthedraftingofthiseditionofthisdocument.
Inthetextofthisdocument,Clausesbeginanewodd-numberedpage,andinClause5,“Lexicalelements”,
throughClause17,“Conformance”,Subclausesbeginanewpage.Anyresultingblankspaceisnotsigni-
ficant.
x ©ISO/IEC2023–Allrightsreserved

---------------------- Page: 10 ----------------------
INTERNATIONAL STANDARD ISO/IEC 9075-13:2023(E)
Informationtechnology—DatabaselanguageSQL—
Part13:
SQLRoutinesandTypesUsingtheJava™ProgrammingLanguage(SQL/JRT)
1 Scope
1
ThisdocumentspecifiestheabilitytoinvokestaticmethodswrittenintheJava programminglanguage
asSQL-invokedroutinesandtouseclassesdefinedintheJavaprogramminglanguageasSQLstructured
user-definedtypes.
1 Java™isaregisteredtrademarkofOracleCorporationand/oritsaffiliates.
©ISO/IEC2023–Allrightsreserved 1

---------------------- Page: 11 ----------------------
ISO/IEC9075-13:2023(E)
2 Normativereferences
Thefollowingdocumentsarereferredtointhetextinsuchawaythatsomeoralloftheircontentconsti-
tutesrequirementsofthisdocument.Fordatedreferences,onlytheeditioncitedapplies.Forundated
references,thelatesteditionofthereferenceddocument(includinganyamendments)applies.
ISO/IEC9075-1,Informationtechnology—Databaselanguages—SQL—Part1:Framework
(SQL/Framework)
ISO/IEC9075-2,Informationtechnology—Databaselanguages—SQL—Part2:Foundation
(SQL/Foundation)
ISO/IEC9075-10,Informationtechnology—Databaselanguages—SQL—Part10:ObjectLanguage
Bindings(SQL/OLB)
ISO/IEC9075-11,Informationtechnology—Databaselanguages—SQL—Part11:Informationand
DefinitionSchemas(SQL/Schemata)
JavaCommunityProcess.TheJava™LanguageSpecification[online].JavaSE13Edition.Redwood
Shores,California,USA:Oracle,Availableathttps://docs.oracle.com/javase/specs/jls/-
se13/jls13.pdf
JavaCommunityProcess.TheJava™VirtualMachineSpecification[online].JavaSE13Edition.Redwood
Shores,California,USA:Oracle,Availableathttps://docs.oracle.com/javase/specs/jvms/-
se13/jvms13.pdf
JavaCommunityProcess.Java™ObjectSerializationSpecification[online].RedwoodShores,California,
USA:Oracle,Availableathttps://docs.oracle.com/en/java/javase/13/docs/specs/-
serialization/serial-arch.html
JavaCommunityProcess.JDBC™4.3Specification[online].Edition4.3.RedwoodShores,California,
USA:Oracle,Availableathttps://download.oracle.com/otn-pub/jcp/-
jdbc-4_3-mrel3-eval-spec/jdbc4.3-fr-spec.pdf
2 ©ISO/IEC2023–Allrightsreserved

---------------------- Page: 12 ----------------------
ISO/IEC9075-13:2023(E)
3 Termsanddefinitions
Forthepurposesofthisdocument,thetermsanddefinitionsgiveninISO/IEC9075-1,ISO/IEC9075-2,
Java,JVMS,andthefollowingapply.
ISOandIECmaintainterminologicaldatabasesforuseinstandardizationatthefollowingaddresses:
— ISOOnlinebrowsingplatform:availableathttps://www.iso.org/obp
— IECElectropedia:availableathttps://www.electropedia.org/
3.1
block
relatedstatementswithinbraces,whichwouldbetreatedasasinglestatement
3.2
classdeclaration
specifiesapossiblyemptysetconsistingofzeroormorefields(3.6),zeroormoremethods,zeroormore
nestedclasses(3.11),zeroormoreinterfaces(3.9),zeroormoreinstanceinitializers(3.7),zeroormore
staticinitializers(3.13),andzeroormoreconstructors
3.3
classfile
filecontainingJavabytecode
3.4
classinstance
consistsofaninstanceofeachinstancevariable(3.8)declaredintheclassandeachinstancevariable(3.8)
declaredinthesuperclassesoftheclass
3.5
classvariable
staticvariabledeclaredinaclass
3.6
field
classvariables(3.5)andinstancevariables(3.8)ofaclass
3.7
instanceinitializer
blockthatisusedtoinitializetheinstancedatamember,thatrunseachtimewhenobjectoftheclassis
created
3.8
instancevariable
variablethatisdeclaredinsideaclassbutoutsidethescopeofanymethod
3.9
interface
Javaconstructconsistingofasetofmethodsignatures
3.10
localvariable
variablesdeclaredinsidethebodyofamethod
©ISO/IEC2023–Allrightsreserved 3

---------------------- Page: 13 ----------------------
ISO/IEC9075-13:2023(E)
3 Termsanddefinitions
3.11
nestedclass
classwithinanotherclass
3.12
package
zeroormoreclasses,zeroormoreinterfaces(3.9),andzeroormoresubpackages(3.14)
3.13
staticinitializer
executescodebeforetheobjectinitialization
3.14
subpackage
package(3.12)withinapackage(3.12)
3.15
JVM
JavaVirtualMachine
virtualmachinethatenablesacomputertorunJavaprograms
3.16
defaultconnection
JDBCconnectiontothecurrentSQL-implementation,SQL-session,andSQL-transactionestablishedwith
thedatasourceURL'jdbc:default:connection'
Note1toentry:SeeRFC2368andRFC3986formoredetailsaboutURLs.
3.17
deploymentdescriptor
oneormoreSQL-statementsthatspecifyandtobetaken,respectively,
bytheSQLJ.INSTALL_JARandSQLJ.REMOVE_JARproceduresandthatarecontainedina
deploymentdescriptorfile(3.18)
3.18
deploymentdescriptorfile
textfilecontainingdeploymentdescriptors(3.17)thatiscontainedinaJAR(3.22),forwhichtheJAR’s
manifestentry,asdescribedbythejava.util.jarsectionofJVMS,specifiesSQLJDeploymentDescriptor:
TRUE
3.19
externalJavadatatype
SQLuser-definedtypedefinedwithathatspecifiesan clause>
3.20
externalJavaroutine
externalroutinedefinedwithanthatspecifiesLANGUAGEJAVAandeither
PROCEDUREorFUNCTION,ordefinedwithathatspecifiesan Javatypeclause>
3.21
installedJAR
JAR(3.22)whoseexistencehasbeenregisteredwiththeSQL-environmentandwhosecontentshave
beencopiedintothatSQL-environmentduetoexecutionofoneoftheproceduresSQLJ.INSTALL_JAR
andSQLJ.REPLACE_JAR
4 ©ISO/IEC2023–Allrightsreserved

---------------------- Page: 14 ----------------------
ISO/IEC9075-13:2023(E)
3 Termsanddefinitions
3.22
JAR
JavaArchive
zip-formattedfile,asdescribedbythejava.util.zipsectionofJVMS,containingzeroormoreJava
classandserfiles,andzeroormoredeploymentdescriptorfiles
Note1toentry:JARsareanormalvehiclefordistributingJavaprogramsandthemechanismspecified
bythisdocumenttoprovidetheimplementationofexternalJavaroutinesandexternalJavadatatypes
toanSQL-environment.
3.23
serfile
filecontainingrepresentationsofJavaobjectsintheformdefinedinJavaSerialization
3.24
subjectJavaclass
Javaclassuniquelyidentifiedbythecombinationoftheclass’ssubjectJavaclassname(3.25)andits
containingJAR(3.22)
3.25
subjectJavaclassname
fully-qualifiedpackagenameandclassnameofaJavaclass
3.26
systemclass
Javaclassprovidedbyaconformingimplementationofthisdocumentthatcanbereferencedbyan
externalJavaroutineoranexternalJavadatatypewithoutthatclasshavingbeenincludedinaninstalled
JAR(3.22)
©ISO/IEC2023–Allrightsreserved 5

---------------------- Page: 15 ----------------------
ISO/IEC9075-13:2023(E)
4 Concepts
ThisClausemodifiesClause4,“Concepts”,inISO/IEC9075-2.
4.1 Notationsandconventions
ThisSubclausemodifiesSubclause4.1,“Notationsandconventions”,inISO/IEC9075-2.
4.1.1 Notations
ThisSubclausemodifiesSubclause4.1.1,“Notations”,inISO/IEC9075-2.
ThenotationsusedinthisdocumentaredefinedinISO/IEC9075-1.
ThesyntaxdefinedinthisdocumentisavailablefromtheISOwebsiteasa“digitalartifact”.See
https://standards.iso.org/iso-iec/9075/-13/ed-5/en/todownloaddigitalartifactsfor
thisdocument.Todownloadthesyntaxdefinedinaplain-textformat,selectthefilenamed
ISO_IEC_9075-13(E)_JRT.bnf.txt.TodownloadthesyntaxdefinedinanXMLformat,selectthe
filenamedISO_IEC_9075-13(E)_JRT.bnf.xml.
4.1.2 Specificationofbuilt-inprocedures
Built-inproceduresarespecifiedintermsofthefollowinginformation.
— Function:Ashortstatementofthepurposeoftheprocedure.
— Signature:Aspecification,inSQL,ofthesignatureoftheprocedure.Theonlypurposeofthesigna-
tureistospecifytheprocedurename,parameternames,andparametertypes.Themannerinwhich
thesebuilt-inproceduresaredefinedisimplementation-dependent(UW004).
— AccessRules:AspecificationinEnglishofrulesgoverningtheaccessibilityofschemaobjectsthat
shallholdbeforetheGeneralRulesmaybesuccessfullyapplied.
— GeneralRules:AspecificationinEnglishoftherun-timeeffectofinvocationoftheprocedure.
WheremorethanoneGeneralRuleisusedtospecifytheeffectofanelement,therequiredeffect
isthatwhichwouldbeobtainedbybeginningwiththefirstGeneralRuleandapplyingtheRulesin
numericsequenceunlessaRuleisappliedthatspecifiesorimpliesachangeinsequenceortermin-
ationoftheapplicationoftheRules.UnlessotherwisespecifiedorimpliedbyaspecificRulethat
isapplied,applicationofGeneralRulesterminateswhenthelastinthesequencehasbeenapplied.
— ConformanceRules:Aspecificationofhowtheelementshallbesupportedforconformanceto
SQL.
ThescopeofnotationalsymbolsistheSubclauseinwhichthosesymbolsaredefined.WithinaSubclause,
thesymbolsdefinedintheSignature,AccessRules,orGeneralRulescanbereferencedinotherrules
providedthattheyaredefinedbeforebeingreferenced.
4.1.3 Specificationofdeploymentdescriptorfiles
Deploymentdescriptorfilesarespecifiedintermsofthefollowing.
— Function:Ashortstatementofthepurposeofthedeploymentdescriptorfile.
— Model:Abriefdescriptionofthemannerinwhichadeploymentdescriptorfileisidentifiedwithin
itscontainingJAR.
6 ©ISO/IEC2023–Allrightsreserved

---------------------- Page: 16 ----------------------
ISO/IEC9075-13:2023(E)
4.1 Notationsandconventions
— Properties:ABNFspecificationofthesyntaxofthecontentsofadeploymentdescriptorfile.
— Description:Aspecificationoftherequirementsandrestrictionsonthecontentsofadeployment
descriptorfile.
— ConformanceRules:Aspecificationofhowtheelementshallbesupportedforconformanceto
SQL.
4.2 Javaprogramminglanguage
TheJavaprogramminglanguageisaclass-based,object-orientedlanguage.Thisdocumentusesthefol-
lowingJavaconceptsandterminology.
AclassisthebasicconstructofJavaprograms,inthatallexecutableJavacodeiscontainedinaJavaclass
definition.Aclassisdeclaredbyaclassdeclarationthatspecifiesapossiblyemptysetconsistingofzero
ormorefields,zeroormoremethods,zeroormorenestedclasses,zeroormoreinterfaces,zeroormore
instanceinitializers,zeroormorestaticinitializers,andzeroormoreconstructors.
Thescopeofavariableisaclass,aninstanceoftheclass,oramethodoftheclass.Thescopeofavariable
thatisdeclaredstaticistheclass,andthevariable
...