ISO/IEC 7816-1:1998/Amd 1:2003

Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics — Amendment 1: Maximum height of the IC contact surface

Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 1: Caractéristiques physiques — Amendement 1: Hauteur maximale de la surface des contacts de la carte IC

General Information

• Status: Withdrawn
• Publication Date: 05-Nov-2003
• Withdrawal Date: 05-Nov-2003
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 4 - Generic interfaces and protocols for security devices
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 31-Jan-2011

Relations

• Revised: ISO/IEC 7816-1:2011 - Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics
• Effective Date: 28-Mar-2009
• Amends: ISO/IEC 7816-1:1998 - Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics
• Effective Date: 06-Jun-2022
• Child: ISO/IEC 7816-1:1998 - Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 7816-1
First edition
1998-10-15
AMENDMENT 1
2003-11-15


Identification cards — Integrated
circuit(s) cards with contacts —
Part 1:
Physical characteristics
AMENDMENT 1: Maximum height of the IC
contact surface
Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts —
Partie 1: Caractéristiques physiques
AMENDEMENT 1: Hauteur maximale de la surface des contacts de la
carte IC




Reference number
ISO/IEC 7816-1:1998/Amd.1:2003(E)
©
ISO/IEC 2003

---------------------- Page: 1 ----------------------
ISO/IEC 7816-1:1998/Amd.1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO/IEC 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2003 — All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 7816-1:1998/Amd.1:2003(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC partic
...