ISO/TS 23818-1:2020
(Main)Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material
This document provides a scheme for the assessment of conformity of PE products and assemblies for the rehabilitation of existing pipelines, in accordance with the applicable parts of ISO 11296, ISO 11297, ISO 11298, ISO 11299 and ISO 21225, and intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, summary tables of overall scheme requirements are provided in Annex E.
Évaluation de la conformité des systèmes de canalisations en plastique destinés à la réhabilitation des réseaux existants — Partie 1: Matériau Polyéthylène (PE)
General Information
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 23818-1
First edition
2020-02
Assessment of conformity of plastics
piping systems for the rehabilitation
of existing pipelines —
Part 1:
Polyethylene (PE) material
L’évaluation de la conformité des systèmes de canalisations en
plastique destinés à la réhabilitation des réseaux existantes —
Partie 1: Matériau Polyéthylène (PE)
Reference number
ISO/TS 23818-1:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO/TS 23818-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 23818-1:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
3.1 Assessment of conformity . 3
3.2 Rehabilitation general . 6
4 Abbreviated terms . 7
5 General . 8
6 Testing and inspection . 8
6.1 Grouping . 8
6.1.1 General. 8
6.1.2 Size groups . 8
6.1.3 Fitting groups . 9
6.2 Type testing . 9
6.3 Batch release tests .10
6.4 Process verification tests .10
6.5 Audit tests .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.