Building construction — Sealants for joints — Determination of change in mass and volume

Construction immobilière — Mastics pour joints — Détermination des variations de masse et de volume

La présente Norme internationale prescrit une méthode de détermination des variations de masse et de volume des mastics utilisés pour des joints dans la construction immobilière.

Gradnja objektov - Tesnilne mase za stike - Ugotavljanje spremembe mase in prostornine

General Information

Status
Withdrawn
Publication Date
10-Jul-1991
Withdrawal Date
10-Jul-1991
Technical Committee
Drafting Committee
Current Stage
9599 - Withdrawal of International Standard
Completion Date
30-Jun-2005

Relations

Buy Standard

Standard
ISO 10563:1991 - Building construction -- Sealants for joints -- Determination of change in mass and volume
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10563:1991 - Construction immobiliere -- Mastics pour joints -- Détermination des variations de masse et de volume
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10563:1991 - Construction immobiliere -- Mastics pour joints -- Détermination des variations de masse et de volume
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard + National Annex and/or Foreword
ISO 10563 1996
Foreword and/or annex in Slovenian language, body of the standard in English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL
STANDARD
First edition
1991-07-M
Building construction - Sealants for joints -
Determination of change in mass and volume
Construction immobilike - Mastics pour joints - D&termination des
variations de masse et de volume
Reference number
IS0 10563:1991(E)

---------------------- Page: 1 ----------------------
ISQ 10563:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard IS0 10563 was prepared by Technical Committee
ISO/TC 59, Building construction.
0 IS0 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organizati on for Standardiz ation
Case Postale 56 l CH-1 21 1 Gen&ve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 10563:1991(E)
Building construction - Sealants for joints - Determination
of change in mass and volume
1 Scope 5 Apparatus and materials
This International Standard specifies a method for
5.1 Rings of non-corrosive metal, having the fol-
the determination of the change of mass and the
lowing approximate dimensions: outer diameter,
change of volume of sealants used in joints in
34 mm; inner diameter, 30 mm; height, IO mm. A
building construction.
hook or loop is fixed to each ring to suspend it from
a string for the weighing procedure.
5.2 Anti-adherent substrate, for the preparation of
2 Normative reference
test specimens; e.g. wet paper.
The following standard contains provisions which,
through reference in this text, constitute provisions 5.3 Conditioning chamber, capable of being
controlled at 23 “C & 2 “C and (50 + 5) % relative
of this International Standard. At the time of publi-
humidity.
cation, the edition indicated was valid. All standards
are subject to revision, and parties to agreements
based on this International Standard are encour-
5.4 Ventilated oven, convection-type, capable of
aged to investigate the possibility of applying the
being controlled at 70 “C + 2 “C, having an air ex-
-
most recent edition of the standard indicated below.
change rate of 30 + 5 times per hour.
Members of IEC and IS0 maintain registers of cur-
rently valid International Standards.
5.5 Regular balance, with an accuracy of 0,Ol g.
IS0 6927:1981, Building construction - Jointing
products - Sealants - Vocabulary.
5.6 Hydrostatic balance, with an accuracy of
0,Ol g.
5.7 Test liquid, at a temperature of 23 OC + 2 ‘C,
3 Definitions
consisting of water with the addition of-up to
0,25 % (m/m) of a low-foam surfactant or, in the
For the purposes of this International Standard, the
case of water-sensitive sealants, iso-octane
definitions given in IS0 6927 apply.
(2,2,4-trimethylpentane) with a boiling point of 99 “C
and a density of 0,7 g/ml.
5.8 Container, for the immersion of the test speci-
4 Principle
mens in the test liquid.
Test specimens consisting of metal rings fille
...

NORME
INTERNATIONALE
Première édition
1991-07-15
Construction immobilière - Mastics pour
Détermination des variations de masse
joints -
et de volume
Building construction - Sealants for joints - Determination of change
in mass and volume
-Y-
--p--p
---
--
Numéro de référence
--p-m-- _. -__-_._ _.--.---- - --- ISO 10563: 199 1 (F)

---------------------- Page: 1 ----------------------
ISO 10563:1991(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 10563 a été élaborée par le comité techni-
que ISO/TC 59, Construction immobilière.
0 ISO 1991
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 0 Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
ISO 10563:1991 (F)
NORME INTERNATIONALE
Construction immobilière - Mastics pour joints -
Détermination des variations de masse et de volume
1 Domaine d’application 5 Appareillage et produits
La présente Norme internationale prescrit une mé-
5.1 Anneaux de métal non oxydable, de dimensions
thode de détermination des variations de masse et
suivantes: diamètre externe 34 mm, diamétre
de volume des mastics utilisés pour des joints dans
interne 30 mm, hauteur 10 mm. Un crochet ou une
la construction immobilière.
boucle est fixé(e) à chaque anneau pour le suspen-
dre au moyen d’un fil pour l’opération de pesage.
2 Référence normative
5.2 Substrat antiadhérent, pour la préparation des
éprouvettes, par exemple papier humide.
La norme suivante contient des dispositions qui, par
suite de la référence qui en est faite, constituent des
5.3 Enceinte climatique, réglable à une tempéra-
dispositions valables pour la présente Norme inter-
ture de 23 “C + 2 OC et (50 + 5) % d’humidité rela-
nationale. Au moment de la publication, l’édition in- - -
tive.
diquée était en vigueur. Toute norme est sujette à
révision et les parties prenantes des accords fondés
sur la présente Norme internationale sont invitées
5.4 Étuve ventilée, du type à convection, réglable
à rechercher la possibilité d’appliquer l’édition la
à une température de 70 “C $I 2 OC, ayant un taux
plus récente de la norme indiquée ci-après. Les
d’échange d’air de 30 + 5 fois par heure.
-
membres de la CEI et de I’ISO possèdent le registre
des Normes internationales en vigueur à un moment
donné.
5.5 Balance, précise à 0,Ol g près.
ISO 6927: 1981, Construction immobilière - Produits
5.6 Balance hydrostatique, précise 0,Ol g près.
pour joints -- Mastics - Vocabulaire.
5.7 Liquide d’essai, à une température de
23 “C + 2 OC, se composant d’eau additionnée de
3 Définitions
0,25 %(m/rn) maximum d’un produit tensio-actif ou
dans le cas de mastics sensibles à l’eau, d’iso-
Pour les besoins de la présente Norme internatio-
octane (triméthyl-2,2,4 pentane) avec un point
nale, les définitions données dans I’ISO 6927 s’ap-
d’ébullition de 99 “c: et une masse volumique de
pliquent.
0,7 g/ml.
5.8 Récipient, pour immersion des éprouvettes
4 Principe
...

NORME
INTERNATIONALE
Première édition
1991-07-15
Construction immobilière - Mastics pour
Détermination des variations de masse
joints -
et de volume
Building construction - Sealants for joints - Determination of change
in mass and volume
-Y-
--p--p
---
--
Numéro de référence
--p-m-- _. -__-_._ _.--.---- - --- ISO 10563: 199 1 (F)

---------------------- Page: 1 ----------------------
ISO 10563:1991(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 10563 a été élaborée par le comité techni-
que ISO/TC 59, Construction immobilière.
0 ISO 1991
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 0 Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
ISO 10563:1991 (F)
NORME INTERNATIONALE
Construction immobilière - Mastics pour joints -
Détermination des variations de masse et de volume
1 Domaine d’application 5 Appareillage et produits
La présente Norme internationale prescrit une mé-
5.1 Anneaux de métal non oxydable, de dimensions
thode de détermination des variations de masse et
suivantes: diamètre externe 34 mm, diamétre
de volume des mastics utilisés pour des joints dans
interne 30 mm, hauteur 10 mm. Un crochet ou une
la construction immobilière.
boucle est fixé(e) à chaque anneau pour le suspen-
dre au moyen d’un fil pour l’opération de pesage.
2 Référence normative
5.2 Substrat antiadhérent, pour la préparation des
éprouvettes, par exemple papier humide.
La norme suivante contient des dispositions qui, par
suite de la référence qui en est faite, constituent des
5.3 Enceinte climatique, réglable à une tempéra-
dispositions valables pour la présente Norme inter-
ture de 23 “C + 2 OC et (50 + 5) % d’humidité rela-
nationale. Au moment de la publication, l’édition in- - -
tive.
diquée était en vigueur. Toute norme est sujette à
révision et les parties prenantes des accords fondés
sur la présente Norme internationale sont invitées
5.4 Étuve ventilée, du type à convection, réglable
à rechercher la possibilité d’appliquer l’édition la
à une température de 70 “C $I 2 OC, ayant un taux
plus récente de la norme indiquée ci-après. Les
d’échange d’air de 30 + 5 fois par heure.
-
membres de la CEI et de I’ISO possèdent le registre
des Normes internationales en vigueur à un moment
donné.
5.5 Balance, précise à 0,Ol g près.
ISO 6927: 1981, Construction immobilière - Produits
5.6 Balance hydrostatique, précise 0,Ol g près.
pour joints -- Mastics - Vocabulaire.
5.7 Liquide d’essai, à une température de
23 “C + 2 OC, se composant d’eau additionnée de
3 Définitions
0,25 %(m/rn) maximum d’un produit tensio-actif ou
dans le cas de mastics sensibles à l’eau, d’iso-
Pour les besoins de la présente Norme internatio-
octane (triméthyl-2,2,4 pentane) avec un point
nale, les définitions données dans I’ISO 6927 s’ap-
d’ébullition de 99 “c: et une masse volumique de
pliquent.
0,7 g/ml.
5.8 Récipient, pour immersion des éprouvettes
4 Principe
...

SLOVENSKI SIST ISO 10563
prva izdaja
STANDARD
december 1996
Gradnja objektov - Tesnilne mase za stike - Ugotavljanje spremembe
mase in prostornine
(prevzet standard ISO 10563:1991 z metodo platnice)
Building construction - Sealants for joints - Determination of change in
mass and volume
Construction immobilière - Mastics pour joints - Détermination des
variations de masse et de volume
Deskriptorji: stavbe, konstrukcijski stiki, materiali za tesnjenje, ugotavljanje, masa,
prostornina
Referen~na {tevilka
ICS: 91.100.50 SIST ISO 10563:1996 ((sl),en)
Nadaljevanje na straneh II in III in od 1 do 2
© Standard je zalo`il in izdal Urad Republike Slovenije za standardizacijo in meroslovje pri Ministrstvu za znanost in tehnologijo.
Razmno`evanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 10563 : 1996
UVOD
Standard SIST ISO 10563 ((sl),en), Gradnja objektov - Tesnilne mase za stike - Ugotavljanje
spremembe mase in prostornine, prva izdaja, 1996, ima status slovenskega standarda in je z
metodo platnice prevzet mednarodni standard ISO 10563, Building construction - Sealants for
joints - Determination of change in mass and volume, First edition, 1991-07-15, v angle{kem
jeziku.
NACIONALNI PREDGOVOR
Mednarodni standard ISO 10563:1991 je pripravil tehni~ni odbor Mednarodne organizacije za
standardizacijo ISO/TC 59 Gradnja poslopij.
Odlo~itev za prevzem tega standarda po metodi platnice je sprejela delovna skupina
USM/TC GPO/WG 3 Stiki, potrdil pa tehni~ni odbor USM/TC GPO Gradnja poslopij.
Ta slovenski standard je dne 1996-11-21 odobril direktor USM.
ZVEZA S STANDARDOM
S prevzemom tega mednarodnega standarda velja naslednja zveza:
SIST EN 26927 Gradnja objektov - Sredstva za stikovanje - Tesnilne mase -
Slovar (ISO 6927:1981)
OSNOVA ZA IZDAJO STANDARDA
- Prevzem standarda ISO 10563:1991
OPOMBI
- Povsod, kjer se v besedilu standarda uporablja izraz “mednarodni standard”, v
SIST ISO 10563:1996 to pomeni “slovenski standard”.
- Uvod in nacionalni predgovor nista sestavni del standarda.
II

---------------------- Page: 2 ----------------------

SIST ISO 10563 : 1996
VSEBINA Stran
1 Namen.1
2 Zveze z drugimi standardi.1
3 Definicije.1
4 Osnove metode.1
5 Oprema in materiali.1
6 Priprava presku{ancev.1
7 Potek preskusa.2
8 Ra~unanje in podajanje rezultatov.2
9 Poro~ilo o preskusu.2
Po mnenju Ministrstva za informiranje Republike Slovenije z dne 18. februarja 1992, {tev. 23/96-92, spada ta publikacija med
proizvode informativne narave iz 13. to~ke tarifne {tevilke 3, za katere se pla~uje 5-odstotni prometni davek.
III

---------------------- Page: 3 ----------------------

INTERNATIONAL
STANDARD
First edition
1991-07-M
Building construction - Sealants for joints -
Determination of change in mass and volume
Construction immobilike - Mastics pour joints - D&termination des
variations de masse et de volume
Reference number
IS0 10563:1991(E)

---------------------- Page: 4 ----------------------

ISQ 10563:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard IS0 10563 was prepared by Technical Committee
ISO/TC 59, Building construction.
0 IS0 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organizati on for Standardiz ation
Case Postale 56 l CH-1 21 1 Gen&ve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 5 ----------------------

INTERNATIONAL STAND
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.