ISO 24102-1:2013/Amd 1:2017

Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 1: Local management — Amendment 1

Systèmes intelligents de transport — Accès aux communications des services mobiles terrestres (CALM) — Gestion des stations ITS — Partie 1: Gestion locale — Amendement 1

General Information

• Status: Withdrawn
• Publication Date: 04-Apr-2017
• Withdrawal Date: 04-Apr-2017
• ICS: 03.220.01 - Transport in general
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ISO/TC 204 - Intelligent transport systems
• Drafting Committee: ISO/TC 204/WG 16 - Communications
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 31-Oct-2018

Relations

• Revised: ISO 24102-1:2018 - Intelligent transport systems — ITS station management — Part 1: Local management
• Effective Date: 04-Feb-2017
• Amends: ISO 24102-1:2013 - Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 1: Local management
• Effective Date: 04-Sep-2021

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 24102-1
First edition
2013-07-01
AMENDMENT 1
2017-04
Intelligent transport systems —
Communications access for land
mobiles (CALM) — ITS station
management —
Part 1:
Local management
AMENDMENT 1
Systèmes intelligents de transport — Accès aux communications des
services mobiles terrestres (CALM) — Gestion des stations ITS —
Partie 1: Gestion locale
AMENDEMENT 1
Reference number
ISO 24102-1:2013/Amd.1:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 24102-1:2013/Amd.1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24102-1:2013/Amd.1:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www . i so .org/ iso/ foreword .html.
Amendment 1 to ISO 24102-1:2013 was prepared by Technical Committee ISO/TC 204, Intelligent
transport systems.
A list of all parts in the ISO 24102 series can be found on the ISO website.
© ISO 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 24102-1:2013/Amd.1:2017(E)
Intelligent transport systems — Communications access
for land mobiles (CALM) — ITS station management —
Part 1:
Local management
AMENDMENT 1
Page 20, Annex A
Replace the entire Annex A with the following:
Annex A
(normative)
ASN.1 modules
A.1 Overview
The following ASN.1 module is specified in this annex:
— CALMmanagement {ISO (1) standard (0) calm-management (24102) local (1) asnm-1 (1)}.
A.2 Module CALMmanagement
This module specifies ASN.1 type definitions together with useful ASN.1 value definitions.
Unaligned packed encoding rules (PER) as specified in ISO/IEC 8825-2 shall be applied for this
ASN.1 module.
CALMmanagement {iso (1) standard (0) calm-management (24102) local (1) asnm-1 (1)}

DEFINITIONS AUTOMATIC TAGS::=BEGIN

IMPORTS

CIstatus, Connect, DataRate, DataRatesNW, Directivity, KineVectOut, Link-ID, MACaddress,
MedType, PARAMS, UserPriority FROM CALMllsap {iso (1) standard (0) calm-ll-sap (21218)
asnm-1 (1)}

ITS-SCUtype FROM CALMiitsscu {iso (1) standard (0) calm-management (24102) iitsscu (4)
asnm-1 (1)}

ITSSappCPReqReg, MediumCost FROM CITSapplReq {iso (1) standard (0) cit
...