ISO/IEC/IEEE 8802-11:2022
(Main)Telecommunications and information exchange between systems — Specific requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
Telecommunications and information exchange between systems — Specific requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
The scope of this standard is to define one medium access control (MAC) and several physical layer (PHY) specifications for wireless connectivity for fixed, portable, and moving stations (STAs) within a local area.
Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY)
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/
STANDARD IEC/IEEE
8802-11
Third edition
2022-07
Telecommunications and information
exchange between systems —
Specific requirements for local and
metropolitan area networks —
Part 11:
Wireless LAN medium access control
(MAC) and physical layer (PHY)
specifications
Télécommunications et échange entre systèmes informatiques —
Exigences pour les réseaux locaux et métropolitains —
Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC)
et de la couche physique (PHY)
Reference number
ISO/IEC/IEEE 8802-11:2022(E)
© IEEE 2022
---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii
© IEEE 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted. This document was drafted in accordance with
the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-11 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE 802.11-
2020) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure”
defined in the Partner Standards Development Organization cooperation agreement between ISO and
IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC
6, Telecommunications and information exchange between systems.
This third edition cancels and replaces the second edition (ISO/IEC/IEEE 8802-11:2018), which has been
technically revised. It also incorporates the Amendments ISO/IEC/IEEE 8802-11:2018/Amd 1:2019,
ISO/IEC/IEEE 8802-11:2018/Amd 2:2019, ISO/IEC/IEEE 8802-11:2018/Amd 3:2020, ISO/IEC/IEEE
8802-11:2018/Amd 4:2020, ISO/IEC/IEEE 8802-11:2018/Amd 5:2020.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
© IEEE 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
iv © IEEE 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
IEEE Std 802.11™-2020
(Revision of IEEE Std 802.11-2016)
IEEE Standard for Information Technology—
Telecommunications and Information Exchange between Systems
Local and Metropolitan Area Networks—
Specific Requirements
Part 11: Wireless LAN Medium Access Control
(MAC) and Physical Layer (PHY) Specifications
Developed by the
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 3 December 2020
IEEE SA Standards Board
1
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Abstract: Technical corrections and clarifications to IEEE Std 802.11 for wireless local area
networks (WLANs) as well as enhancements to the existing medium access control (MAC) and
physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2016
and 2018 have also been incorporated into this revision.
Keywords: 2.4 GHz, 256-QAM, 3650 MHz, 4.9 GHz, 5 GHz, 5.9 GHz, 60 GHz, advanced
encryption standard, AES, audio, beamforming, carrier sense multiple access/collision avoidance,
CCMP, channel switching, clustering, contention based access period, Counter mode with Cipher-
block chaining Message authentication code Protocol, confidentiality, CSMA/CA, DFS, direct link,
directional multi-gigabit, dynamic allocation of service period, dynamic extension of service period,
dynamic frequency selection, dynamic truncation of service period, E911, EDCA, emergency alert
system, emergency services, fast session transfer, forwarding, GCMP, generic advertisement
service, high throughput, IEEE 802.11™, international roaming, interworking, interworking with
external networks, LAN, local area network, MAC, management, measurement, medium access
control, media-independent handover, medium access controller, mesh, MIS, millimeter-wave,
MIMO, MIMO-OFDM, multi-band operation, multi-hop, multi-user MIMO, multiple input multiple
output, network advertisement, network discovery, network management, network selection,
noncontiguous frequency segments, OCB, path-selection, personal basic service set, PHY,
physical layer, power saving, QoS, quality of service, quality-of-service management frame, radio,
radio frequency, RF, radio resource, radio management, relay operation, spatial sharing, SSPN,
subscriber service provider, television white spaces, TPC, transmit power control, video, wireless
access in vehicular environments, wireless LAN, wireless local area network, WLAN, wireless
network management, zero-knowledge proof
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2021 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 26 February 2021. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
Print: ISBN 978-1-5044-7283-8 STD24548
PDF: ISBN 978-1-5044-7284-5 STD24548
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
2
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE Standards documents are made available for use subject to important notices and legal disclaimers.
These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html),
appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning
IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standards
through an accredited consensus development process, which brings together volunteers representing varied
viewpoints and interests to achieve the final product. IEEE Standards are documents developed by
volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers
are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While
IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE makes no warranties or representations concerning its standards, and expressly disclaims all
warranties, express or implied, concerning this standard, including but not limited to the warranties of
merchantability, fitness for a particular purpose and non-infringement. In addition, IEEE does not warrant or
represent that the use of the material contained in its standards is free from patent infringement. IEEE
Standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or
her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate,
seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE
NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that
an IEEE standard is translated, only the English version published by IEEE is the approved IEEE standard.
3
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter’s views should be considered the personal views of that individual rather
than the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of interests.
For this reason, IEEE and the members of its Societies and Standards Coordinating Committees are not able to
provide an instant response to comments, or questions except in those cases where the matter has previously
been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would
like to participate in evaluating comments or in revisions to an IEEE standard is welcome to join the relevant
IEEE working group. You can indicate interest in a working group using the Interests tab in the Manage Profile
& Interests area of the IEEE SA myProject system. An IEEE Account is needed to access the application.
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400;
https://www.copyright.com/. Permission to photocopy portions of any individual standard for educational
classroom use can also be obtained through the Copyright Clearance Center.
4
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore or contact IEEE. For more
information about the IEEE SA or IEEE’s standards development process, visit the IEEE SA Website.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE SA Website. Search for standard number
and year of approval to access the web page of the published standard. Errata links are located under the
Additional Resources Details section. Errata are also available in IEEE Xplore. Users are encouraged to
periodically check for errata.
Patents
IEEE Standards are developed in compliance with the IEEE SA Patent Policy.
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE
SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their
own responsibility. Further information may be obtained from the IEEE Standards Association.
IMPORTANT NOTICE
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. IEEE Standards development activities consider
research and information presented to the standards development group in developing any safety
recommendations. Other information about safety practices, changes in technology or technology
implementation, or impact by peripheral systems also may be pertinent to safety considerations during
implementation of the standard. Implementers and users of IEEE Standards documents are responsible for
determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
5
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Participants
At the time this revision was sent to sponsor ballot, the IEEE 802.11 Working Group (WG) had the
following officers:
Dorothy V. Stanley, Chair
st
Jon W. Rosdahl, 1 Vice Chair
nd
Robert Stacey, 2 Vice Chair
Stephen McCann, Secretary
The officers of the WG Task Group md and the members of the WG ballot group for this revision are as
follows:
Dorothy V. Stanley, Chair
Mark Hamilton, Vice Chair
Michael Montemurro, Vice Chair
Jon W. Rosdahl, Secretary
Emily H. Qi, Technical Editor
Edward Au, Technical Sub-editor
Osama S. Aboulmagd Sean Coffey Hanseul Hong
Tomoko Adachi Carlos Cordeiro Koji Horisaki
Jinsoo Ahn Claudio da Silva Chunyu Hu
Subir Das Lei Huang
Woojin Ahn
Kosuke Aio Rolf J. de Vegt Po-Kai Huang
Carlos H. Aldana Pierre Debergh Zhiyong Huang
Yaron Alpert Donald E. Eastlake Sung Hyun H. Hwang
Song-Haur An Peter Ecclesine Yasuhiko Inoue
Carol Ansley Richard Edgar Timothy Jeffries
Lee R. Armstrong Marc Emmelmann Jia Jia
Yusuke Asai Vinko Erceg Jinjing Jiang
Alfred Asterjadhi Andrew Estrada Liang Jin
Kwok Shum S. Au Ping Fang Allan Jones
Vijay Auluck Yonggang Fang Vincent Knowles Jones
Xiang Feng Volker Jungnickel
Geert A. Awater
Shahrnaz Azizi Norman Finn Christophe Jurczak
Robert Baeten Matthew J. Fischer Carl W. Kain
Eugene Baik Michael Fischer Naveen K. Kakani
Stephane Baron Shunsuke Fujio Dzevdan Kapetanovic
Anuj Batra Sho Furuichi Assaf Y. Kasher
Friedbert Berens Ming Gan Oren Kedem
Christian Berger Eduard Garcia Villegas Richard H. Kennedy
Nehru Bhandaru Chittabrata Ghosh Stuart J. Kerry
John Buffington James P. Gilb Evgeny Khorov
George Calcev Tim Godfrey Jeongki Kim
Rui Cao Niranjan Grandhe Jin Min Kim
Laurent Cariou Michael Grigat Sang Gook Kim
William Carney Qiang Guo Suhwook Kim
Ricky Chair Yuchen Guo Yongho Kim
Clint F. Chaplin Robert Hall Youhan Kim
Jiamin Chen Xiao Han Jarkko Kneckt
Xiaogang Chen Thomas Handte Geonjung Ko
Fumihide Kojima
George Cherian Christopher J. Hansen
Dmitry Cherniavsky Chris Hartman Bruce P. Kraemer
Rojan Chitrakar Victor Hayes Manish Kumar
Hangyu Cho Allen D. Heberling Rajesh Kumar
Jinsoo Choi Ahmadreza Hedayat Massinissa Lalam
Liwen Chu Robert F. Heile Zhou Lan
Jinyoung Chun Guido R. Hiertz Leonardo Lanante
Dana Ciochina Duncan Ho James Lansford
6
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Jae Seung S. Lee Minyoung Park Bin Tian
Sungeun Lee Sung-jin Park Fei Tong
Suzanne Leicht Glenn Parsons Solomon B. Trainin
James Lepp Abhishek Patil Yoshio Urabe
Joseph Levy Hakan Persson Richard D. Van Nee
Allert Van Zelst
Dejian Li James E. Petranovich
Guoqing Li Albert Petrick Lorenzo Vangelista
Huan-Bang Li Ron Porat Jerome Vanthournout
Qiang Li Rethnakaran Pulikkoonattu Prabodh Varshney
Yanchun Li Dengyu Qiao Ganesh Venkatesan
Yunbo Li Demir Rakanovic Lochan Verma
Dong Guk Lim Enrico-Henrik Rantala Sameer Vermani
Yingpei Lin Maximilian Riegel Pascal Viger
Erik Lindskog Mark Rison George A. Vlantis
Der-Zheng Liu Zhigang Rong Chao Chun Wang
Jianhan Liu Kiseon Ryu Haiming Wang
Huizhao Wang
Yong Liu Bahareh Sadeghi
Peter Loc Takenori Sakamoto James June J. Wang
Artyom Lomayev Kazuyuki Sakoda Lei Wang
Hui-Ling Lou Sam Sambasivan Xiaofei Wang
Kaiying Lv Hemanth Sampath Xuehuan Wang
Lily Lv Naotaka Sato Lisa Ward
Jing Ma Sigurd Schelstraete Julian Webber
Narendar Madhavan Andy Scott Menzo M. Wentink
Jouni K. Malinen Yongho Seok Leif Wilhelmsson
Alexander Maltsev Stephen J. Shellhammer Eric Wong
Hiroshi Mano Ian Sherlock Tianyu Wu
Shimi Shilo Yan Xin
Roger Marks
Stephen McCann Graham K. Smith Qi Xue
Simone Merlin Ju-Hyung Son Rui Yang
Apurva Mody Sudhir Srinivasa Xun Yang
Bibhu Mohanty Robert Stacey Yunsong Yang
Hitoshi Morioka Adrian P. Stephens Kazuto Yano
Yuichi Morioka Noel Stott James Yee
Hiroyuki Motozuka Jung Hoon H. Suh Peter Yee
Robert Mueller Takenori Sumi Su Khiong K. Yong
Yutaka Murakami Bo Sun Christopher Young
Andrew Myles Chen Sun Heejung Yu
Li-Hsiang Sun Jian Yu
Patrice Nezou
Paul Nikolich Sheng Sun Mao Yu
Yujin Noh Yanjun Sun SunWoong Yun
John Notor Dennis Sundman Alan Zeleznikar
Minseok Oh Mineo Takai Hongyuan Zhang
Oghenekome Oteri Sagar Tamhane Xingxin Zhang
Kazuyuki Ozaki Yusuke Tanaka Yan Zhang
Stephen Palm Kentaro Taniguchi Xiayu Zheng
Eunsung Park Wu Tao Lan Zhuo
Major contributions were received from the following individuals:
Tomo Adachi Daniel N. Harkins Mark Rison
Edward Au Jerome Henry Jon W. Rosdahl
Gabr Bajko Guido R. Hiertz Kazuyuki Sakoda
Nehru Bhandaru Srinivas Kandala Sigurd Schelstraete
Jiamin Chen Assaf Y. Kasher Graham K. Smith
Sean Coffey Youhan Kim Robert Stacey
Thomas Derham Jouni K. Malinen Dorothy V. Stanley
Peter Ecclesine Stephen McCann Bo Sun
Marc Emmelmann Michael Montemurro Payam Torab
Matthew J. Fischer Yujin Noh Solomon B. Trainin
David Goodall Abhishek Patil Ganesh Venkatesan
Mark Hamilton Emily H. Qi Haiming Wang
Christopher J. Hansen Menzo M. Wentink
7
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
The following members of the individual balloting committee voted on this revision. Balloters may have
voted for approval, disapproval, or abstention.
Osama Aboulmagd Atsushi Ito R. K. Rannow
Tomoko Adachi Raj Jain Ranga Reddy
Robert Aiello SangKwon Jeong Alon Regev
Thomas Alexander Pranav Jha Maximilian Riegel
Nobumitsu Amachi Jeffrum Jones Mark Rison
Carol Ansley Joe Natharoj Juisai Robert Robinson
Butch Anton Lokesh Kabra Benjamin Rolfe
Alfred Asterjadhi Srinivas Kandala Jon W. Rosdahl
Kwok Shum S. Au Piotr Karocki Kazuyuki Sakoda
Stephan Sand
Harry Bims Assaf Y. Kasher
Nancy Bravin Stuart J. Kerry Chester Sandberg
Jason Brent Evgeny Khorov Shigenobu Sasaki
Vern Brethour Yongbum Kim Naotaka Sato
Demetrio Bucaneg Youhan Kim Sigurd Schelstraete
William Byrd Patrick Kinney Andy Scott
Paul Cardinal Shoichi Kitazawa Yongho Seok
William Carney Jan Kruys Kunal Shah
Juan Carreon Yasushi Kudoh Ian Sherlock
Pin Chang Thomas Kurihara Di Dieter Smely
Cheng Chen Hyeong Ho Lee Graham K. Smith
Kang Lee Robert Stacey
Evelyn Chen
George Cherian Wookbong Lee Dorothy V. Stanley
Rojan Chitrakar Frank Leong Thomas Starai
Paul Chiuchiolo James Lepp Noel Stott
John Coffey Joseph Levy Walter Struppler
Charles Cook Yong Liu Mark Sturza
D. Nelson Costa Javier Luiso Mitsutoshi Sugawara
Claudio da Silva Valerie Maguire Bo Sun
Antonio de la Oliva Delgado Jouni K. Malinen Li-Hsiang Sun
Peter Ecclesine Jeffery Masters Jasja Tijink
Richard Edgar Stephen McCann Payam Torab Jahromi
Brett McClellan Solomon B. Trainin
Alecsander Eitan
Marc Emmelmann Michael Montemurro Mark-Rene Uchida
Xiang Feng Hiroyuki Motozuka Allert Van Zelst
Matthew J. Fischer Ronald Murias Prabodh Varshney
Michael Fischer Rick Murphy John Vergis
Avraham Freedman Andrew Myles Lochan Verma
Sho Furuichi Paul Neveux George A. Vlantis
Devon Gayle Nick S. A. Nikjoo Lei Wang
Mariana Goldhamer Paul Nikolich Lisa Ward
David Goodall Robert O’Hara Hung-Yu Wei
Michael Gundlach Satoshi Obara Matthias Wendt
Bansi Patel Menzo M. Wentink
Mark Hamilton
Christopher J. Hansen Abhishek Patil Scott Willy
Jerome Henry Arumugam Paventhan Andreas Wolf
Marco Hernandez Albert Petrick Chun Yu Charles Wong
Lili Hervieu Brian Petry Forrest Wright
Guido R. Hiertz David Piehler Peter Wu
Werner Hoelzl Walter Pienciak Yunsong Yang
Yu Yuan
Oliver Holland Clinton Powell
Glenn Hu Venkatesha Prasad Oren Yuen
Yasuhiko Inoue Emily H. Qi Janusz Zalewski
Demir Rakanovic
8
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
When the IEEE SA Standards Board approved this recommended practice on 3 December 2020, it had the
following membership:
Gary Hoffman, Chair
Jon Walter Rosdahl, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse David J. Law Mehmet Ulema
Doug Edwards Howard Li Lei Wang
J. Travis Griffith Dong Liu Sha Wei
Grace Gu Kevin Lu Philip B. Winston
Guido R. Hiertz Paul Nikolich Daidi Zhong
Joseph L. Koepfinger* Damir Novosel Jingyi Zhou
Dorothy V. Stanley
*Member Emeritus
9
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Introduction
This introduction is not part of IEEE Std 802.11-2020, IEEE Standard for Information Technology—
Telecommunications and Information Exchange between Systems—Local and Metropolitan Area Networks—
Specific Requirements—Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY)
Specifications.
This revision gives users, in one document, the IEEE 802.11 standard for wireless local area networks
(WLANs) with all of the amendments that have been published to date.
Incorporating published amendments
The original standard was published in 1997, revised in 1999 with MIB changes, and reaffirmed in 2003.
A revision was published in 2007, which incorporated into the 1999 edition the following amendments:
— IEEE Std 802.11a™-1999: High-speed Physical Layer in the 5 GHz Band (Amendment 1)
— IEEE Std 802.11b™-1999: Higher-Speed Physical Layer Extension in the 2.4 GHz Band
(Amendment 2)
— IEEE Std 802.11b-1999/Co
...
FINAL
INTERNATIONAL ISO/
DRAFT
STANDARD IEC/IEEE
FDIS
8802-11
ISO/IEC JTC 1/SC 6
Telecommunications and information
Secretariat: KATS
exchange between systems —
Voting begins on:
2022-01-24 Specific requirements for local and
metropolitan area networks —
Voting terminates on:
2022-06-13
Part 11:
Wireless LAN medium access control
(MAC) and physical layer (PHY)
specifications
Télécommunications et échange entre systèmes informatiques —
Exigences pour les réseaux locaux et métropolitains —
Partie 11: Spécifications du contrôle d'accès du milieu sans fil (MAC)
et de la couche physique (PHY)
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE FDIS 8802-11:2022(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2021
---------------------- Page: 1 ----------------------
ISO/IEC/IEEE FDIS 8802-11:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii
© IEEE 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC/IEEE FDIS 8802-11:2022(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted. This document was drafted in accordance with
the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-11 was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE 802.11-
2020) and drafted in accordance with its editorial rules. It was adopted, under the “fast-track procedure”
defined in the Partner Standards Development Organization cooperation agreement between ISO and
IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC
6, Telecommunications and information exchange between systems.
This third edition cancels and replaces the second edition (ISO/IEC/IEEE 8802-11:2018), which has been
technically revised. It also incorporates the Amendments ISO/IEC/IEEE 8802-11:2018/Amd 1:2019,
ISO/IEC/IEEE 8802-11:2018/Amd 2:2019, ISO/IEC/IEEE 8802-11:2018/Amd 3:2020, ISO/IEC/IEEE
8802-11:2018/Amd 4:2020, ISO/IEC/IEEE 8802-11:2018/Amd 5:2020.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
© IEEE 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC/IEEE FDIS 8802-11:2022(E)
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
iv © IEEE 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
IEEE Std 802.11™-2020
(Revision of IEEE Std 802.11-2016)
IEEE Standard for Information Technology—
Telecommunications and Information Exchange between Systems
Local and Metropolitan Area Networks—
Specific Requirements
Part 11: Wireless LAN Medium Access Control
(MAC) and Physical Layer (PHY) Specifications
Developed by the
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 3 December 2020
IEEE SA Standards Board
1
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Abstract: Technical corrections and clarifications to IEEE Std 802.11 for wireless local area
networks (WLANs) as well as enhancements to the existing medium access control (MAC) and
physical layer (PHY) functions are specified in this revision. Amendments 1 to 5 published in 2016
and 2018 have also been incorporated into this revision.
Keywords: 2.4 GHz, 256-QAM, 3650 MHz, 4.9 GHz, 5 GHz, 5.9 GHz, 60 GHz, advanced
encryption standard, AES, audio, beamforming, carrier sense multiple access/collision avoidance,
CCMP, channel switching, clustering, contention based access period, Counter mode with Cipher-
block chaining Message authentication code Protocol, confidentiality, CSMA/CA, DFS, direct link,
directional multi-gigabit, dynamic allocation of service period, dynamic extension of service period,
dynamic frequency selection, dynamic truncation of service period, E911, EDCA, emergency alert
system, emergency services, fast session transfer, forwarding, GCMP, generic advertisement
service, high throughput, IEEE 802.11™, international roaming, interworking, interworking with
external networks, LAN, local area network, MAC, management, measurement, medium access
control, media-independent handover, medium access controller, mesh, MIS, millimeter-wave,
MIMO, MIMO-OFDM, multi-band operation, multi-hop, multi-user MIMO, multiple input multiple
output, network advertisement, network discovery, network management, network selection,
noncontiguous frequency segments, OCB, path-selection, personal basic service set, PHY,
physical layer, power saving, QoS, quality of service, quality-of-service management frame, radio,
radio frequency, RF, radio resource, radio management, relay operation, spatial sharing, SSPN,
subscriber service provider, television white spaces, TPC, transmit power control, video, wireless
access in vehicular environments, wireless LAN, wireless local area network, WLAN, wireless
network management, zero-knowledge proof
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2021 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 26 February 2021. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
Print: ISBN 978-1-5044-7283-8 STD24548
PDF: ISBN 978-1-5044-7284-5 STD24548
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
2
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE Standards documents are made available for use subject to important notices and legal disclaimers.
These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html),
appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning
IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standards
through an accredited consensus development process, which brings together volunteers representing varied
viewpoints and interests to achieve the final product. IEEE Standards are documents developed by
volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers
are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While
IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE makes no warranties or representations concerning its standards, and expressly disclaims all
warranties, express or implied, concerning this standard, including but not limited to the warranties of
merchantability, fitness for a particular purpose and non-infringement. In addition, IEEE does not warrant or
represent that the use of the material contained in its standards is free from patent infringement. IEEE
Standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or
her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate,
seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE
NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that
an IEEE standard is translated, only the English version published by IEEE is the approved IEEE standard.
3
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter’s views should be considered the personal views of that individual rather
than the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of interests.
For this reason, IEEE and the members of its Societies and Standards Coordinating Committees are not able to
provide an instant response to comments, or questions except in those cases where the matter has previously
been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would
like to participate in evaluating comments or in revisions to an IEEE standard is welcome to join the relevant
IEEE working group. You can indicate interest in a working group using the Interests tab in the Manage Profile
& Interests area of the IEEE SA myProject system. An IEEE Account is needed to access the application.
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400;
https://www.copyright.com/. Permission to photocopy portions of any individual standard for educational
classroom use can also be obtained through the Copyright Clearance Center.
4
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore or contact IEEE. For more
information about the IEEE SA or IEEE’s standards development process, visit the IEEE SA Website.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE SA Website. Search for standard number
and year of approval to access the web page of the published standard. Errata links are located under the
Additional Resources Details section. Errata are also available in IEEE Xplore. Users are encouraged to
periodically check for errata.
Patents
IEEE Standards are developed in compliance with the IEEE SA Patent Policy.
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE
SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their
own responsibility. Further information may be obtained from the IEEE Standards Association.
IMPORTANT NOTICE
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. IEEE Standards development activities consider
research and information presented to the standards development group in developing any safety
recommendations. Other information about safety practices, changes in technology or technology
implementation, or impact by peripheral systems also may be pertinent to safety considerations during
implementation of the standard. Implementers and users of IEEE Standards documents are responsible for
determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
5
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Participants
At the time this revision was sent to sponsor ballot, the IEEE 802.11 Working Group (WG) had the
following officers:
Dorothy V. Stanley, Chair
st
Jon W. Rosdahl, 1 Vice Chair
nd
Robert Stacey, 2 Vice Chair
Stephen McCann, Secretary
The officers of the WG Task Group md and the members of the WG ballot group for this revision are as
follows:
Dorothy V. Stanley, Chair
Mark Hamilton, Vice Chair
Michael Montemurro, Vice Chair
Jon W. Rosdahl, Secretary
Emily H. Qi, Technical Editor
Edward Au, Technical Sub-editor
Osama S. Aboulmagd Sean Coffey Hanseul Hong
Tomoko Adachi Carlos Cordeiro Koji Horisaki
Jinsoo Ahn Claudio da Silva Chunyu Hu
Subir Das Lei Huang
Woojin Ahn
Kosuke Aio Rolf J. de Vegt Po-Kai Huang
Carlos H. Aldana Pierre Debergh Zhiyong Huang
Yaron Alpert Donald E. Eastlake Sung Hyun H. Hwang
Song-Haur An Peter Ecclesine Yasuhiko Inoue
Carol Ansley Richard Edgar Timothy Jeffries
Lee R. Armstrong Marc Emmelmann Jia Jia
Yusuke Asai Vinko Erceg Jinjing Jiang
Alfred Asterjadhi Andrew Estrada Liang Jin
Kwok Shum S. Au Ping Fang Allan Jones
Vijay Auluck Yonggang Fang Vincent Knowles Jones
Xiang Feng Volker Jungnickel
Geert A. Awater
Shahrnaz Azizi Norman Finn Christophe Jurczak
Robert Baeten Matthew J. Fischer Carl W. Kain
Eugene Baik Michael Fischer Naveen K. Kakani
Stephane Baron Shunsuke Fujio Dzevdan Kapetanovic
Anuj Batra Sho Furuichi Assaf Y. Kasher
Friedbert Berens Ming Gan Oren Kedem
Christian Berger Eduard Garcia Villegas Richard H. Kennedy
Nehru Bhandaru Chittabrata Ghosh Stuart J. Kerry
John Buffington James P. Gilb Evgeny Khorov
George Calcev Tim Godfrey Jeongki Kim
Rui Cao Niranjan Grandhe Jin Min Kim
Laurent Cariou Michael Grigat Sang Gook Kim
William Carney Qiang Guo Suhwook Kim
Ricky Chair Yuchen Guo Yongho Kim
Clint F. Chaplin Robert Hall Youhan Kim
Jiamin Chen Xiao Han Jarkko Kneckt
Xiaogang Chen Thomas Handte Geonjung Ko
Fumihide Kojima
George Cherian Christopher J. Hansen
Dmitry Cherniavsky Chris Hartman Bruce P. Kraemer
Rojan Chitrakar Victor Hayes Manish Kumar
Hangyu Cho Allen D. Heberling Rajesh Kumar
Jinsoo Choi Ahmadreza Hedayat Massinissa Lalam
Liwen Chu Robert F. Heile Zhou Lan
Jinyoung Chun Guido R. Hiertz Leonardo Lanante
Dana Ciochina Duncan Ho James Lansford
6
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Jae Seung S. Lee Minyoung Park Bin Tian
Sungeun Lee Sung-jin Park Fei Tong
Suzanne Leicht Glenn Parsons Solomon B. Trainin
James Lepp Abhishek Patil Yoshio Urabe
Joseph Levy Hakan Persson Richard D. Van Nee
Allert Van Zelst
Dejian Li James E. Petranovich
Guoqing Li Albert Petrick Lorenzo Vangelista
Huan-Bang Li Ron Porat Jerome Vanthournout
Qiang Li Rethnakaran Pulikkoonattu Prabodh Varshney
Yanchun Li Dengyu Qiao Ganesh Venkatesan
Yunbo Li Demir Rakanovic Lochan Verma
Dong Guk Lim Enrico-Henrik Rantala Sameer Vermani
Yingpei Lin Maximilian Riegel Pascal Viger
Erik Lindskog Mark Rison George A. Vlantis
Der-Zheng Liu Zhigang Rong Chao Chun Wang
Jianhan Liu Kiseon Ryu Haiming Wang
Huizhao Wang
Yong Liu Bahareh Sadeghi
Peter Loc Takenori Sakamoto James June J. Wang
Artyom Lomayev Kazuyuki Sakoda Lei Wang
Hui-Ling Lou Sam Sambasivan Xiaofei Wang
Kaiying Lv Hemanth Sampath Xuehuan Wang
Lily Lv Naotaka Sato Lisa Ward
Jing Ma Sigurd Schelstraete Julian Webber
Narendar Madhavan Andy Scott Menzo M. Wentink
Jouni K. Malinen Yongho Seok Leif Wilhelmsson
Alexander Maltsev Stephen J. Shellhammer Eric Wong
Hiroshi Mano Ian Sherlock Tianyu Wu
Shimi Shilo Yan Xin
Roger Marks
Stephen McCann Graham K. Smith Qi Xue
Simone Merlin Ju-Hyung Son Rui Yang
Apurva Mody Sudhir Srinivasa Xun Yang
Bibhu Mohanty Robert Stacey Yunsong Yang
Hitoshi Morioka Adrian P. Stephens Kazuto Yano
Yuichi Morioka Noel Stott James Yee
Hiroyuki Motozuka Jung Hoon H. Suh Peter Yee
Robert Mueller Takenori Sumi Su Khiong K. Yong
Yutaka Murakami Bo Sun Christopher Young
Andrew Myles Chen Sun Heejung Yu
Li-Hsiang Sun Jian Yu
Patrice Nezou
Paul Nikolich Sheng Sun Mao Yu
Yujin Noh Yanjun Sun SunWoong Yun
John Notor Dennis Sundman Alan Zeleznikar
Minseok Oh Mineo Takai Hongyuan Zhang
Oghenekome Oteri Sagar Tamhane Xingxin Zhang
Kazuyuki Ozaki Yusuke Tanaka Yan Zhang
Stephen Palm Kentaro Taniguchi Xiayu Zheng
Eunsung Park Wu Tao Lan Zhuo
Major contributions were received from the following individuals:
Tomo Adachi Daniel N. Harkins Mark Rison
Edward Au Jerome Henry Jon W. Rosdahl
Gabr Bajko Guido R. Hiertz Kazuyuki Sakoda
Nehru Bhandaru Srinivas Kandala Sigurd Schelstraete
Jiamin Chen Assaf Y. Kasher Graham K. Smith
Sean Coffey Youhan Kim Robert Stacey
Thomas Derham Jouni K. Malinen Dorothy V. Stanley
Peter Ecclesine Stephen McCann Bo Sun
Marc Emmelmann Michael Montemurro Payam Torab
Matthew J. Fischer Yujin Noh Solomon B. Trainin
David Goodall Abhishek Patil Ganesh Venkatesan
Mark Hamilton Emily H. Qi Haiming Wang
Christopher J. Hansen Menzo M. Wentink
7
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
The following members of the individual balloting committee voted on this revision. Balloters may have
voted for approval, disapproval, or abstention.
Osama Aboulmagd Atsushi Ito R. K. Rannow
Tomoko Adachi Raj Jain Ranga Reddy
Robert Aiello SangKwon Jeong Alon Regev
Thomas Alexander Pranav Jha Maximilian Riegel
Nobumitsu Amachi Jeffrum Jones Mark Rison
Carol Ansley Joe Natharoj Juisai Robert Robinson
Butch Anton Lokesh Kabra Benjamin Rolfe
Alfred Asterjadhi Srinivas Kandala Jon W. Rosdahl
Kwok Shum S. Au Piotr Karocki Kazuyuki Sakoda
Stephan Sand
Harry Bims Assaf Y. Kasher
Nancy Bravin Stuart J. Kerry Chester Sandberg
Jason Brent Evgeny Khorov Shigenobu Sasaki
Vern Brethour Yongbum Kim Naotaka Sato
Demetrio Bucaneg Youhan Kim Sigurd Schelstraete
William Byrd Patrick Kinney Andy Scott
Paul Cardinal Shoichi Kitazawa Yongho Seok
William Carney Jan Kruys Kunal Shah
Juan Carreon Yasushi Kudoh Ian Sherlock
Pin Chang Thomas Kurihara Di Dieter Smely
Cheng Chen Hyeong Ho Lee Graham K. Smith
Kang Lee Robert Stacey
Evelyn Chen
George Cherian Wookbong Lee Dorothy V. Stanley
Rojan Chitrakar Frank Leong Thomas Starai
Paul Chiuchiolo James Lepp Noel Stott
John Coffey Joseph Levy Walter Struppler
Charles Cook Yong Liu Mark Sturza
D. Nelson Costa Javier Luiso Mitsutoshi Sugawara
Claudio da Silva Valerie Maguire Bo Sun
Antonio de la Oliva Delgado Jouni K. Malinen Li-Hsiang Sun
Peter Ecclesine Jeffery Masters Jasja Tijink
Richard Edgar Stephen McCann Payam Torab Jahromi
Brett McClellan Solomon B. Trainin
Alecsander Eitan
Marc Emmelmann Michael Montemurro Mark-Rene Uchida
Xiang Feng Hiroyuki Motozuka Allert Van Zelst
Matthew J. Fischer Ronald Murias Prabodh Varshney
Michael Fischer Rick Murphy John Vergis
Avraham Freedman Andrew Myles Lochan Verma
Sho Furuichi Paul Neveux George A. Vlantis
Devon Gayle Nick S. A. Nikjoo Lei Wang
Mariana Goldhamer Paul Nikolich Lisa Ward
David Goodall Robert O’Hara Hung-Yu Wei
Michael Gundlach Satoshi Obara Matthias Wendt
Bansi Patel Menzo M. Wentink
Mark Hamilton
Christopher J. Hansen Abhishek Patil Scott Willy
Jerome Henry Arumugam Paventhan Andreas Wolf
Marco Hernandez Albert Petrick Chun Yu Charles Wong
Lili Hervieu Brian Petry Forrest Wright
Guido R. Hiertz David Piehler Peter Wu
Werner Hoelzl Walter Pienciak Yunsong Yang
Yu Yuan
Oliver Holland Clinton Powell
Glenn Hu Venkatesha Prasad Oren Yuen
Yasuhiko Inoue Emily H. Qi Janusz Zalewski
Demir Rakanovic
8
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
When the IEEE SA Standards Board approved this recommended practice on 3 December 2020, it had the
following membership:
Gary Hoffman, Chair
Jon Walter Rosdahl, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse David J. Law Mehmet Ulema
Doug Edwards Howard Li Lei Wang
J. Travis Griffith Dong Liu Sha Wei
Grace Gu Kevin Lu Philip B. Winston
Guido R. Hiertz Paul Nikolich Daidi Zhong
Joseph L. Koepfinger* Damir Novosel Jingyi Zhou
Dorothy V. Stanley
*Member Emeritus
9
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802-11:2022(E)
Introduction
This introduction is not part of IEEE Std 802.11-2020, IEEE Standard for Information Technology—
Telecommunications and Information Exchange between Systems—Local and Metropolitan Area Networks—
Specific Requirements—Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY)
Specifications.
This revision gives u
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.