ISO/FDIS 4664

Rubber, vulcanized or thermoplastic — Determination of dynamic properties — General guidance

ISO 4664:2004 provides guidance on the determination of dynamic properties of vulcanized and thermoplastic rubbers. It includes both free- and forced-vibration methods carried out on both materials and products. It does not cover rebound resilience or cyclic tests in which the main objective is to fatigue the rubber.

Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés dynamiques — Lignes directrices

General Information

• Status: Withdrawn
• ICS: 83.060 - Rubber
• Technical Committee: ISO/TC 45/SC 2 - Testing and analysis
• Drafting Committee: ISO/TC 45/SC 2/WG 1 - Physical properties
• Current Stage: 5098 - Project deleted
• Completion Date: 17-Dec-2004

Relations

• Replaced By: ISO 4664-1:2005 - Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
• Effective Date: 15-Apr-2008
• Consolidated By: ISO 17916:2016 - Safety of thermal cutting machines
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 4664
ISO/TC 45/SC 2
Rubber, vulcanized or thermoplastic —
Secretariat: SIS
Determination of dynamic properties —
Voting begins on:
General guidance
2004-10-15
Voting terminates on:
Caoutchouc vulcanisé ou thermoplastique — Détermination des
2004-12-15
propriétés dynamiques — Lignes directrices



Please see the administrative notes on page iii

RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORT-
ING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 4664:2004(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2004

---------------------- Page: 1 ----------------------
ISO/FDIS 4664:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 4664:2004(E)
In accordance with the provisions of Council Resolution 15/1993, this document is circulated in the
English language only.

© ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 4664:2004(E)
Contents Page
Foreword .v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Symbols.7
5 Principles .9
6 Apparatus.14
7 Calibration.16
8 Test conditions and test pieces.16
9 Conditioning .20
10 Test procedure.21
11 Expression of results.21
12 Test report.
...