ISO 11890-2:2020/Amd 1:2024

Paints and varnishes — Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content — Part 2: Gas-chromatographic method — Amendment 1

Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) et/ou composés organiques semi-volatils (COSV) — Partie 2: Méthode par chromatographie en phase gazeuse — Amendement 1

General Information

• Status: Published
• Publication Date: 25-Jun-2024
• ICS: 87.040 - Paints and varnishes
• Technical Committee: ISO/TC 35/SC 16 - Chemical analysis
• Drafting Committee: ISO/TC 35/SC 16 - Chemical analysis
• Current Stage: 6060 - International Standard published
• Start Date: 26-Jun-2024
• Due Date: 19-Jul-2024
• Completion Date: 26-Jun-2024

Relations

• Consolidates: ISO/TR 9241-380:2022 - Ergonomics of human-system interaction — Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction
• Effective Date: 30-Jul-2022
• Amends: ISO 11890-2:2020 - Paints and varnishes — Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content — Part 2: Gas-chromatographic method
• Effective Date: 23-Jul-2022

Standards Content (Sample)

International
Standard
ISO 11890-2
Fourth edition
Paints and varnishes —
2020-06
Determination of volatile organic
compounds (VOC) and/or semi
AMENDMENT 1
volatile organic compounds (SVOC)
2024-06
content —
Part 2:
Gas-chromatographic method
AMENDMENT 1
Peintures et vernis — Détermination de la teneur en composés
organiques volatils (COV) et/ou composés organiques semi-
volatils (COSV) —
Partie 2: Méthode par chromatographie en phase gazeuse
AMENDEMENT 1
Reference number
ISO 11890-2:2020/Amd.1:2024(en) © ISO 2024

ISO 11890-2:2020/Amd.1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 11890-2:2020/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the Wo
...

Norme
internationale
ISO 11890-2
Quatrième édition
Peintures et vernis —
2020-06
Détermination de la teneur en
composés organiques volatils (COV)
AMENDEMENT 1
et/ou composés organiques semi-
2024-06
volatils (COSV) —
Partie 2:
Méthode par chromatographie en
phase gazeuse
AMENDEMENT 1
Paints and varnishes — Determination of volatile organic
compounds (VOC) and/or semi volatile organic compounds
(SVOC) content —
Part 2: Gas-chromatographic method
AMENDMENT 1
Numéro de référence
ISO 11890-2:2020/Amd.1:2024(fr) © ISO 2024

ISO 11890-2:2020/Amd.1:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii
ISO 11890-2:2020/Amd.1:2024(fr)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO, participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l’ISO n'avait pas
reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d’avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de
brevets et averti de leur existence.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l’O
...

FINAL DRAFT
Amendment
ISO 11890-2:2020/
FDAM 1
ISO/TC 35/SC 16
Paints and varnishes —
Secretariat: DIN
Determination of volatile organic
Voting begins on:
compounds(VOC) and/or semi
2024-02-08
volatile organic compounds (SVOC)
Voting terminates on:
content —
2024-04-04
Part 2:
Gas-chromatographic method
AMENDMENT 1
Peintures et vernis — Détermination de la teneur en composés
organiques volatils (COV) et/ou composés organiques semi-
volatils (COSV) —
Partie 2: Méthode par chromatographie en phase gazeuse
AMENDEMENT 1
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO 11890-2:2020/FDAM 1:2024(en) © ISO 2024

FINAL DRAFT
ISO 11890-2:2020/FDAM 1:2024(en)
Amendment
ISO 11890-2:2020/
FDAM 1
ISO/TC 35/SC 16
Paints and varnishes —
Secretariat: DIN
Determination of volatile organic
Voting begins on:
compounds(VOC) and/or semi
volatile organic compounds (SVOC)
Voting terminates on:
content —
Part 2:
Gas-chromatographic method
AMENDMENT 1
Peintures et vernis — Détermination de la teneur en composés
organiques volatils (COV) et/ou composés organiques semi-
volatils (COSV) —
Partie 2: Méthode par chromatographie en phase gazeuse
AMENDEMENT 1
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO 11890-2:2020/FDAM 1:2024(en) © ISO 2024

ii
ISO 11890-2:2020/FDAM 1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation
...

ISO 11890-2:2020/DAMFDAmd 1:2023(E(en)
2023-08-23
ISO 11890-2-2:2020/DAM FDAmd 1:2023(E)
ISO /TC 35/SC 16/WG 1
Secretariat: DIN
Date: 2024-01-25
Paints and varnishes — Determination of volatile organic
compounds (VOC) and/or semi volatile organic compounds (SVOC)
content —
—
Part 2:
Gas-chromatographic method
AMENDMENT 1
Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) et/ou en composés
organiques semi-volatils (COSV) —
—
Partie 2: Méthode par chromatographie en phase gazeuse

AMENDEMENT 1
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
i
ISO 11890-2:2020/DAMFDAmd 1:2023(E(en)
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii
ISO 11890-2:2020/DAMFDAmd 1:2023(E(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adhe
...