ISO 17339:2018

Ships and marine technology — Life saving and fire protection — Sea anchors for survival craft and rescue boats

This document specifies requirements for the design, performance and prototype testing of sea anchors fitted to survival craft (lifeboats and liferafts) and rescue boats in accordance with the IMO International Life-Saving Appliance Code.

Navires et technologie maritime — Ancres flottantes pour embarcations de sauvetage et canots de secours

General Information

• Status: Published
• Publication Date: 18-Jul-2018
• ICS: 47.080 - Small craft
• Technical Committee: ISO/TC 8/SC 1 - Maritime safety
• Drafting Committee: ISO/TC 8/SC 1/WG 1 - Lifesaving appliances and arrangements
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 05-Feb-2024

Relations

• Revises: ISO 17339:2002 - Ships and marine technology — Sea anchors for survival craft and rescue boats
• Effective Date: 04-Nov-2015

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17339
Second edition
2018-07
Ships and marine technology — Life
saving and fire protection — Sea
anchors for survival craft and rescue
boats
Navires et technologie maritime — Ancres flottantes pour
embarcations de sauvetage et canots de secours
Reference number
ISO 17339:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 17339:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17339:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design and performance criteria . 1
4.1 General . 1
4.2 Drag force . 2
4.3 Towing line . 2
4.4 Shroud line . 2
4.5 Attachments . 2
4.6 Stabilization . 2
4.7 Deployment . 2
4.8 Design . 2
5 Prototype testing . 3
5.1 Material test . 3
5.1.1 Strength test for fabric . 3
5.1.2 Strength test for structural webbing .
...