iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 10214:1991/Cor 1:1992

(Corrigendum)

Photography — Processed photographic materials — Filing enclosures for storage — Technical Corrigendum 1

Photography — Processed photographic materials — Filing enclosures for storage — Technical Corrigendum 1

Modifies sub-clause 4.2: in the last paragraph, line 1, "indirect" shall be replaced by "direct".

Photographie — Produits photographiques après traitement — Contenants pour classement destinés à l'archivage — Rectificatif technique 1

General Information

Status
Withdrawn
Publication Date
22-Jan-1992
Withdrawal Date
22-Jan-1992
ICS
37.040.20 - Photographic paper, films and plates. Cartridges
Technical Committee
ISO/TC 42 - Photography
Drafting Committee
ISO/TC 42/WG 5 - Physical properties and image permanence of photographic materials
Current Stage
9599 - Withdrawal of International Standard
Completion Date
30-Aug-2001
Ref Project

Relations

Revised
ISO 18902:2001 - Imaging materials — Processed photographic films, plates and papers — Filing enclosures and storage containers
Effective Date
15-Apr-2008
Child
ISO 10214:1991 - Photography — Processed photographic materials — Filing enclosures for storage
Effective Date
15-Apr-2008
Corrects
ISO 10214:1991 - Photography — Processed photographic materials — Filing enclosures for storage
Effective Date
06-Jun-2022

Buy Standard

ISO 10214:1991/Cor 1:1992ISO 10214:1991/Cor 1:1992
PreviousNext
Standard
ISO 10214:1991/Cor 1:1992
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD ISO 10214 : 1991
TECHNICAL CORRIGENDUM 1
Published 1992-01-15
INTERNATIONAL ORGANKATION FOR STANDARDIZATION. MEXCIYHAPOAHAR OPrAHM3A~MR i-IO CTAH~APTM3A~MM. ORGANISATION INTERNATIONALE DE NORMALlSATlON
Processed photographic materials - Filing
Photography -
enclosures for storage
TECHNICAL CORRIGENDUM 1
Con tenan ts pour classemen t des tinks 2 l’archivage
Pho tographie - Produits pho tographiques aprb traitemen t -
RECTIFICATIF TECHNIQUE 1
Technical corrigendum 1 to International St
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 18937-1:2023(Main)
Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 1: General guidance and requirements

This document provides information and general guidance about the methods for measuring the indoor light stability of reflection prints, both colour and monochrome, transparent or translucent films, and photographic prints for backlit displays. This document is relevant to the selection and operation of the methods of exposure to radiation and environmental stress factors described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing printed material to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated lightfastness devices. NOTE In this document, the term “light source” refers to radiation sources that emit UV radiation, visible radiation, infrared radiation, or any combination of these types of radiation. This document does not include test procedures for determining the effects of light exposure on the physical stability of images, supports, or binder materials. However, it is recognized that in some instances, physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than the stability of the image itself, determines the useful life of a print material. Print image stability results determined for one printer model, software settings, colorant, and media combination may not be applicable to another combination.

  • Standard
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
ISO
ISO 18937-2:2023(Main)
Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 2: Xenon‐arc lamp exposure

This document describes test equipment and procedures for measuring the light stability of photographic prints when subjected to a filtered xenon-arc light source at specified levels of illuminance (irradiance), temperature and relative humidity. It is applicable to both colour and monochrome reflection prints, transparent films, or translucent films. It is also applicable to photographic prints in general, photobooks, or prints for backlit displays. General indoor display conditions described herein are intended to simulate common use conditions found in houses, apartments and other dwelling places where indirect lighting due to filtering (through window glass) and shading is often the principal illumination causing displayed photographs to fade. Simulated in-window display conditions are intended to simulate terrestrial daylight transmitted through standard architectural window glass (double glazing). A typical example of such display can be found when images are displayed in store windows, facing toward the outdoors, so that they can be viewed by people outside of the store[5][6]. NOTE It is recognized that in some instances, physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than the stability of the image itself, will determine the useful life of a print material. General guidance is given in ISO 18937-1.

  • Standard
    13 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off
ISO
ISO/TS 20791-3:2023(Main)
Photography — Photographic reflection prints — Part 3: Evaluation of glossiness

This document describes the characterization of glossiness of photographic reflection prints, which consists of specular gloss measurement and image clarity measurement. This document is applicable to any photographic printing technology such as inkjet, thermal dye transfer, electrophotography and silver halide technologies. NOTE The level of preferred glossiness depends on the application.

  • Technical specification
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off
ISO
ISO/TS 21139-22:2023(Main)
Permanence and durability of commercial prints — Part 22: Backlit display in indoor or shaded outdoor conditions — Light stability

This document describes the test methods for light stability measurements of prints on transparent or translucent foils, sheets and paper or printed on a textile, which are displayed on backlit units installed in indoor or in shaded outdoor conditions, which are protected against direct precipitation and radiative heating. Installations of backlit display units in outdoor areas without shading, which are exposed to direct weathering and/or radiative heating, are excluded. This document is applicable to the various product classes of “commercial prints” that are suitable for backlit display. These commercial prints often contain combinations of text, pictorial images and/or artwork. This document provides guidelines for colour measurements, data analysis and also provides guidance for translation of test results into suitable image permanence performance claims considering the variability of backlit designs and environmental conditions. This document is applicable to both analogue and digitally printed matter. Methods and principles apply to both, colour, and monochrome prints.

  • Technical specification
    27 pages
    English language
    sale 15% off
  • Draft
    27 pages
    English language
    sale 15% off
  • Draft
    27 pages
    English language
    sale 15% off
ISO
ISO 18951-1:2022(Main)
Imaging materials — Scratch resistance of photographic prints — Part 1: General test method

This document specifies test method, test target, and reporting requirements to determine the scratch resistance of prints with photographic images. Photographic images can be produced by a wide range of printing technologies, including silver halide, electrophotography, inkjet, dye diffusion thermal transfer, commonly known as dye sublimation, and dye transfer processes. This document is applicable to prints with paper substrate and other type of substrates including prints on plastic, glass, metal and other materials. This document is applicable to photographic prints that have no protection as well as photographic prints that are protected by a coating or lamination. It is not the purpose of this document to define limits of acceptability or failure. They would be determined by the user and the intended application.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 18951-2:2022(Main)
Imaging materials — Scratch resistance of photographic prints — Part 2: Sclerometer test method
  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 18909:2022(Main)
Photography — Processed photographic colour films and paper prints — Methods for measuring image stability
SIST ISO 18909:2023

This document describes test methods for determining the long-term dark storage stability of colour photographic images and the colour stability of such images when subjected to certain illuminants at specified temperatures and relative humidities. This document is applicable to colour photographic images made with traditional, continuous-tone photographic materials with images formed with dyes. These images are generated with chromogenic, silver dye-bleach, dye transfer, and dye-diffusion-transfer instant systems. The tests have not been verified for evaluating the stability of colour images produced with dry- and liquid-toner electrophotography, thermal dye transfer (sometimes called dye sublimation), ink jet, pigment-gelatin systems, offset lithography, gravure and related colour imaging systems. If these reflection print materials, including silver halide (chromogenic), are digitally printed, refer to ISO 18936, ISO 18941, ISO 18946, and ISO 18949 for dark stability tests, and the ISO 18937 series for light stability tests. This document does not include test procedures for the physical stability of images, supports or binder materials. However, it is recognized that in some instances, physical degradation such as support embrittlement, emulsion cracking or delamination of an image layer from its support, rather than image stability, will determine the useful life of a colour film or print material.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    50 pages
    English language
    sale 15% off
  • Draft
    50 pages
    English language
    sale 15% off
ISO
ISO 18913:2021(Main)
Imaging materials — Permanence — Vocabulary
SIST ISO 18913:2022

This document establishes a vocabulary of terms and definitions used in respect of the permanence of imaging materials, related storage materials and digital storage media. In most cases these terms and definitions are generic and are applicable to the entire imaging industry. For terms and definitions specific to particular applications, refer to industry standards. However, in some cases the definition of a term is still evolving and/or is used by different user groups in different ways. In this case a definition fit for use in Imaging Materials – Permanence work is given and a note to this effect is included.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO/TS 18950:2021(Main)
Imaging materials —Photographic prints — Effect of light sources on degradation under museum conditions

The test method in this document is intended to be used to characterize and compare the degradation of a set of print materials under exposure to particular light sources, eventually including optical filter combinations, under museum environmental conditions. The document covers typical types of indoor light sources commonly found in a museum including indoor daylight, LED, and incandescent light. This document is applicable to analogue and digital reflection photographic prints. NOTE Examples of photographic prints covered by this document are prints made with digital printing technologies such as inkjet, electrophotography, and thermal dye transfer, as well as prints made on silver halide colour paper but not prints made on black and white silver halide paper.

  • Technical specification
    16 pages
    English language
    sale 15% off
ISO
ISO 18947-1:2021(Main)
Imaging materials and prints — Abrasion resistance — Part 1: General rub testing methods

This document specifies test methods to determine the rub resistance of analogue and digital prints. This includes photographic as well as graphic and office prints on all substrates. ISO 18947-1 provides information and general guidance relevant to the selection and operation of abrasion test methods and also describes general performance requirements for abrasion test devices used.

  • Standard
    19 pages
    English language
    sale 15% off
  • Draft
    19 pages
    English language
    sale 15% off