ISO/IEC 24727-2:2008/Amd 1:2014

Identification cards — Integrated circuit card programming interfaces — Part 2: Generic card interface — Amendment 1

Cartes d'identification — Interfaces programmables de cartes à puce — Partie 2: Interface de carte générique — Amendement 1

General Information

• Status: Published
• Publication Date: 23-Mar-2014
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Current Stage: 6060 - International Standard published
• Start Date: 27-Jan-2015
• Completion Date: 24-Mar-2014

Relations

• Amends: ISO/IEC 24727-2:2008 - Identification cards — Integrated circuit card programming interfaces — Part 2: Generic card interface
• Effective Date: 04-Dec-2021

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 24727-2
First edition
2008-10-01
AMENDMENT 1
2014-04-01
Identification cards — Integrated
circuit card programming
interfaces —
Part 2:
Generic card interface
AMENDMENT 1
Cartes d’identification — Interfaces programmables de cartes à
puce —
Partie 2: Interface de carte générique
AMENDEMENT 1
Reference number
ISO/IEC 24727-2:2008/Amd.1:2014(E)
©
ISO/IEC 2014

---------------------- Page: 1 ----------------------
ISO/IEC 24727-2:2008/Amd.1:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 24727-2:2008/Amd.1:2014(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO/IEC 24727-2 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 17, Cards and personal identification.
© ISO/IEC 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 24727-2:2008/Amd.1:2014(E)
Identification cards — Integrated circuit card
programming interfaces —
Part 2:
Generic card interface
AMENDMENT 1
Page 2, Clause 3
Insert the following new terms and definitions and renumber the current 3.3 as 3.5:
3.3
legacy card
integrated circuit card which is not personalized for the ISO/IEC 24727 standard
3.4
procedural element
software that can be accessed to provide manipulation of specific interface commands within a pro-
cessing layer
cf. translation code
Page 4, 5.1.3
Add the following row at the end of Table 2:
ENVELOPE ‘C3’ A None
Page 13
Add the following new subclause at the end of Clause 6:
6.5 Discovery Mechanism for Legacy Cards
Cards in the field for which post-issuance personalization may turn too expensive require a practical
means to fit easily in a ISO/IEC 24727 framework. To leverage access for these legacy-cards to
ISO/IEC 24727 enabled e-services (client-application), card issuers may deliver to Service Providers a
card discovery registry respective to each type of card so that to have it recognized at bootstrap. In
relation to this card discovery registry, either an ACD or ISO/IEC 7816-15 based or XML-based CardInfo
shall be made available to the service provider for a whole description of card capabilities involved in
the transaction with the ISO/IEC 24727 enabled client-application.
ASN.1 definition for legacy-card discovery
6.5.1 The CardDiscovery Module
ISO24727-2-CardDiscovery {iso(1) standard(0) iso24727(24727) part2(2)
...

DRAFT AMENDMENT ISO/IEC 24727-2:2008/DAM 1
ISO/IEC JTC 1 Secretariat: ANSI

Voting begins on Voting terminates on
2012-04-23 2012-09-23
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
INTERNATIONAL ELECTROTECHNICAL COMMISSION • МЕЖДУНАРОДНАЯ ЭЛЕКТРОТЕХНИЧЕСКАЯ КОММИСИЯ • COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE


Identification cards — Integrated circuit card programming
interfaces —
Part 2:
Generic card interface
AMENDMENT 1
Cartes d'identification — Interfaces programmables de cartes à puce —
Partie 2: Interface de carte générique
AMENDEMENT 1
ICS 35.240.15


To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.


THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
USER PURPOSES,
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND
DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME
STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
International Organization for Standardization, 2012
©
International Electrotechnical Commission, 2012

---------------------- Page: 1 ----------------------
ISO/IEC 24727-2:2008/DAM 1

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO/IEC 2012 — All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 24727-2 AMD:1
Contents Page
Foreword. iv
Introduction . v
Scope …………………………………………………………………………………………………………………….1
6.5 Discovery Mechanism for Legacy Cards . 4

© ISO/IEC 2012 — All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 24727-2 AMD:1
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO/IEC 24727-2:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Identification cards - integrated circuit card programming interfaces, Subcommittee SC 17, Generic card
interface.
 Part 1: Architecture
 Part 2: Generic card interface
 Part 3: Application interface
 Part 4: API administration
 Part 5: Testing
 Part 6: Registration authority procedures for the authentication protocols for interoperability
iv © ISO/IEC 2012 — All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 24727-2 AMD:1
Introduction
ISO/IEC 24727 defines interoperable programming interfaces to integrated circuit cards. Programming
interfaces are defined for all card lifecycle stages and for use with integrated circuit cards.
ISO/IEC 24727 is written with sufficient detail and completeness that independent implementations of each
part are interchangeable and can interoperate with independent implementations of the other parts.
This part of ISO/IEC 24727 specifies a command-level programming interface to contactless integrated circuit
cards and cards with contacts that is a concretization of the concepts, data structures and commands found in
the following documents:
 ISO/IEC 7816-4, Identification cards — Integrated circuit cards — Part 4: Organization, security and
commands for interchange
 ISO/IEC 7816-8, Identification cards — Integrated circuit cards — Part 8: Commands for security
operations
 ISO/IEC 7816-9, Identification cards — Integrated circuit cards — Part 9: Commands for card
management
 ISO/IEC 7816-15, Identification cards — Integrated circuit cards — Part 15: Cryptographic
information application
 ISO/IEC 20060, Information technology — Open Terminal Architecture (OTA) specification — Virtual
machine specification
The commands and data objects described in this part of ISO/IEC 24727 are consistent with the commands
and data objects found in these documents which will be referred to as the base documents.
This part of ISO/IEC 24727 maximizes the fungibility of independent realizations of its prescriptions. This
property of this part of ISO/IEC 24727 is realized by positing a minimally sufficient subset of the base
standards which realizes their core functionality through the minimization of the number of options provided.
XML encodings have become more and more used in the field of Identification, Authentication and (digital)
Signature (IAS) Identity Management and general networking communication. It is therefore useful to improve
the discovery mechanism in order to ascertain the availability of this technology in certain ISO/IEC 24727
stack configurations.
This new work item proposal is one of three new work item proposals on the ISO/IEC 24727 series of
standards that are envisioned to be developed in parallel
© ISO/IEC 2012 — All rights reserved v

---------------------- Page: 5 ----------------------
ISO/IEC 24727-2 AMD:1
Identification cards — I
...