SIST EN 60745-1:2009/A11:2010

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

This part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. So far as is practicable, this standard deals with the common hazards presented by hand-held tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Tools with an electric heating element are within the scope of this standard. They should also comply with relevant parts of IEC 60335. Requirements for motors not isolated from the supply, and having basic insulation not designed for the rated voltage of the tools, are given in Annex B. Requirements for rechargeable batterypowered motor-operated or magnetically driven tools and the battery packs for such tools are given in Annex K. Those for such tools that are also operated and/or charged directly from the mains or a non-isolated source are given in Annex L. Hand-held electric tools, hereinafter referred to as tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard. Requirements for such supports or working stands are given in Annex M. This standard does not apply to: - hand-held tools intended to be used in the presence of explosive atmosphere (dust, vapour or gas); - hand-held tools used for preparing and processing food; - hand-held tools for medical purposes (IEC 60601); - heating tools which are covered by IEC 60335-2-45. For hand-held tools intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. For hand-held tools intended to be used in tropical countries, special requirements may be necessary.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 1: Allgemeine Anforderungen -

Outils électroportatifs à moteur - Sécurité - Partie 1: Règles générales

Električna ročna orodja - Varnost - 1. del: Splošne zahteve - Dopolnilo A11

Ta del IEC 60745 se ukvarja z varnostjo električnih ali magnetno gnanih ročnih orodij, katerih ocenjena napetost ni več kot 250 V za enofazna orodja z izmeničnim ali enosmernim tokom in 440 V za trifazna orodja z izmeničnim tokom. Dokler je predvideno, se ta standard ukvarja s splošnimi nevarnostmi, ki jih predstavljajo ročna orodja, s katerimi se srečujejo vse osebe pri običajni uporabi in razumno predvideni napačni uporabi orodij.     Orodja z električnim grelnim elementom so na področju uporabe tega standarda. Prav tako morajo biti skladna s pomembnimi deli IEC 60335. Zahteve za motorje, ki niso ločeni od napajanja in nimajo osnovne izolacije, načrtovane za ocenjene napetosti orodij, so podane v Dodatku B. Zahteve za baterijska, električna ali magnetno gnana orodja z zmožnostjo ponovnega polnjenja in komplete baterij za taka orodja so podane v Dodatku K. Za tista orodja, ki so upravljana in/ali polnjena neposredno iz glavnih vodov ali neizoliranih virov, so podane v Dodatku L. Ročna električna orodja, v nadaljevanju orodja, ki se lahko namestijo na podporo ali delovno stojalo za uporabo kot pritrjena orodja brez menjave samega orodja, so na področja uporabe tega standarda.    Zahteve za take podpore ali delovna stojala so podane v Dodatku M. Ta standard ne velja za: - ročna orodja za uporabo v prisotnosti eksplozivnih atmosfer (prah, hlapi ali plin); - ročna orodja, uporabljena za pripravo in predelavo hrane; - ročna orodja za medicinske potrebe (IEC 60601); - orodja za segrevanje, ki so zajeta v IEC 60335-2-45. Za ročna orodja za uporabo v vozilih ali na krovu ladij ali zračnih plovil so lahko potrebne dodatne zahteve. Za ročna orodja za uporabo v tropski državah so lahko potrebne posebne zahteve.

General Information

• Status: Withdrawn
• Publication Date: 08-Nov-2010
• Withdrawal Date: 06-Jun-2016
• ICS: 25.140.20 - Electric tools
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Jun-2016
• Due Date: 30-Jun-2016
• Completion Date: 07-Jun-2016
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Ref Project: EN 60745-1:2009/A11:2010 - Hand-held motor-operated electric tools - Safety - Part 1: General requirements

Relations

• Amends: SIST EN 60745-1:2009 - Hand-held motor-operated electric tools - Safety -- Part 1: General requirements
• Effective Date: 01-Dec-2010
• Replaced By: SIST EN 62841-1:2015 - Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General requirements
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 62841-1:2015 - Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General requirements
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 62841-1:2015 - Electric Motor-Operated Hand-Held, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General requirements
• Effective Date: 01-Dec-2015
• Amends: SIST EN 60745-1:2009 - Hand-held motor-operated electric tools - Safety -- Part 1: General requirements
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-1:2009/A11:2010
01-december-2010
(OHNWULþQDURþQDRURGMD9DUQRVWGHO6SORãQH]DKWHYH'RSROQLOR$
Hand-held motor-operated electric tools - Safety - Part 1: General requirements
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 1: Allgemeine
Anforderungen -
Outils électroportatifs à moteur - Sécurité - Partie 1: Règles générales
Ta slovenski standard je istoveten z: EN 60745-1:2009/A11:2010
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-1:2009/A11:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-1:2009/A11:2010

---------------------- Page: 2 ----------------------

SIST EN 60745-1:2009/A11:2010

EUROPEAN STANDARD
EN 60745-1/A11

NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM

ICS 25.140.20


English version


Hand-held motor-operated electric tools -
Safety -
Part 1: General requirements



Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 1: Règles générales Sicherheit -
Teil 1: Allgemeine Anforderungen -





This amendment A11 modifies the European Standard EN 60745-1:2009; it was approved by CENELEC on
2010-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germ
...