SIST EN 60512-10-4:2004

Connectors for electronic equipment - Tests and measurements -- Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

Draws up a standard method to assess the performance of mated contact pairs of connectors with an electrical overload current flowing through them for a limited period of time between 100 ms and 20 s. Is applicable to the electrical overload test of mated contact pairs of connectors.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 10-4: Aufprallprüfungen (freie Bauelemente), Prüfungen mit statischer Last (feste Bauelemente), Dauerprüfung und Überlastprüfungen - Prüfung 10d: Elektrische Überlast (Steckverbinder)

Connecteurs pour équipements électroniques - Essais et mesures -- Partie 10-4: Essais d'impact (composants libres), essais d'impact sous charge statique (composants fixes), essais d'endurance et essais de surcharge - Essai 10d: Surcharge électrique (connecteurs)

Etablit une méthode d'essai normalisée pour évaluer le comportement de paires de contacts de connecteurs accouplés parcourus par un courant de surcharge pendant une durée limitée comprise entre 100 ms et 20 s. Est applicable à l'essai de surcharge électrique des paires de contacts de connecteurs accouplés.

Konektorji za elektronsko opremo - Preskusi in meritve - 10-4. del: Udarni preskusi (proste komponente), preskusi statične obremenitve (pritrjene komponente), preskusi vzdržljivosti in preskusi preobremenitve - Preskus 10d: Električna preobremenitev (konektorjev) (IEC 60512-10-4:2003)

General Information

• Status: Published
• Publication Date: 31-Oct-2004
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2004
• Due Date: 01-Nov-2004
• Completion Date: 01-Nov-2004
• Ref Project: EN 60512-10-4:2003 - Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

Relations

• Replaces: SIST EN 60512-10-4:2002 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 10: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests -- Section 4: Test 10d: Electrical overload (connectors)
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60512-10-4:2002 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 10: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests -- Section 4: Test 10d: Electrical overload (connectors)
• Effective Date: 06-May-2014

Standards Content (Sample)

SLOVENSKI SIST EN 60512-10-4:2004

STANDARD
november 2004
Konektorji za elektronsko opremo - Preskusi in meritve - 10-4. del: Udarni
preskusi (proste komponente), preskusi statične obremenitve (pritrjene
komponente), preskusi vzdržljivosti in preskusi preobremenitve - Preskus
10d: Električna preobremenitev (konektorjev) (IEC 60512-10-4:2003)
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact
tests (free components), static load tests (fixed components), endurance tests and
overload tests - Test 10d: Electrical overload (connectors) (IEC 60512-10-4:2003)
ICS 31.220.10 Referenčna številka
SIST EN 60512-10-4:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60512-10-4
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003

ICS 31.220.10 Supersedes EN 60512-10-4:1996


English version


Connectors for electronic equipment –
Tests and measurements
Part 10-4: Impact tests (free components), static load tests
(fixed components), endurance tests and overload tests –
Test 10d: Electrical overload (connectors)
(IEC 60512-10-4:2003)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques – Einrichtungen –
Essais et mesures Mess- und Prüfverfahren
Partie 10-4: Essais d'impact (composants Teil 10-4: Aufprallprüfungen (freie
libres), essais d'impact sous charge Bauelemente), Prüfungen mit statischer
statique (composants fixes), essais Last (feste Bauelemente), Dauerprüfung
d'endurance et essais de surcharge - und Überlastprüfungen –
Essai 10d: Surcharge électrique Prüfung 10d: Elektrische Überlast
(connecteurs) (Steckverbinder)
(CEI 60512-10-4:2003) (IEC 60512-10-4:2003)

This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60512-10-4:2003 E

---------------------- Page: 2 ----------------------

EN 60512-10-4:2003 - 2 -
Foreword
The text of document 48B/1350/FDIS, future edition 2 of IEC 60512-10-4, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-10-4 on 2003-10-01.
This European Standard supersedes EN 60512-10-4:1996.
This standard is to be read in conjunction with EN 60512-1:2001 and EN 60512-1-100:2001 which
explains the structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-10-4:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60512-10-4:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512 Series Connectors for electronic equipment - EN 60512 Series
Tests and measurements

IEC 60512-1-100 2001 Connectors for electronic equipment - EN 60512-1-100 2001
Tests and measurements
Part 1-100: General - Applicable
publications

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60512-10-4
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-08
Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 10-4:
Essais d'impact (composants libres),
essais d'impact sous charge statique
(composants fixes), essais d'endurance
et essais de surcharge –
Essai 10d: Surcharge électrique (connecteurs)
Connectors for electronic equipment –
Tests and measurements –
Part 10-4:
Impact tests (free components), static load
tests (fixed components), endurance tests
and overload tests –
Test 10d: Electrical overload (connectors)
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
G
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60512-10-4 © IEC:2003 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 10-4: Impact tests (free components), static load tests
(fixed components), endurance tests and overload tests –
Test 10d: Electrical overload (connectors)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has r
...