SIST EN 13451-3:2011/kFprA2:2013
(Amendment)Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
This European Standard specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1:2010. The requirements of this specific standard take priority over those in EN 13451-1:2010. This part of EN 13451 is applicable to swimming pool equipment designed for: - the introduction and/or extraction of water for treatment or leisure purposes; - the introduction of air for leisure purposes; - water leisure features involving the movement of water. NOTE The above items are identified with the general term devices.
Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen
Équipement de piscine - Partie 3: Exigences de sécurité et méthodes d'essai complémentaires propres aux pièces d'aspiration et de refoulement et aux équipements de loisirs aquatiques disposant d'introduction et d’extraction d'eau/d’air
Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in preskusne metode za bazenski pribor za pripravo vode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13451-3:2011/kFprA2:2013
01-november-2013
Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in
preskusne metode za bazenski pribor za pripravo vode
Swimming pool equipment - Part 3: Additional specific safety requirements and test
methods for inlets and outlets and water/air based water leisure features
Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische
Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen
Équipement de piscine - Partie 3: Exigences de sécurité et méthodes d'essai
complémentaires propres aux pièces d'aspiration et de refoulement et aux équipements
de loisirs aquatiques disposant d'introduction et d’extraction d'eau/d’air
Ta slovenski standard je istoveten z: EN 13451-3:2011/FprA2
ICS:
97.220.10 Športni objekti Sports facilities
SIST EN 13451-3:2011/kFprA2:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13451-3:2011/kFprA2:2013
---------------------- Page: 2 ----------------------
SIST EN 13451-3:2011/kFprA2:2013
EUROPEAN STANDARD
FINAL DRAFT
EN 13451-3:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA2
September 2013
ICS 97.220.10
English Version
Swimming pool equipment - Part 3: Additional specific safety
requirements and test methods for inlets and outlets and
water/air based water leisure features
Équipement de piscine - Partie 3: Exigences de sécurité et Schwimmbadgeräte - Teil 3: Zusätzliche besondere
méthodes d'essai complémentaires propres aux pièces sicherheitstechnische Anforderungen und Prüfverfahren für
d'aspiration et de refoulement et aux équipements de loisirs Ein- und Ausläufe sowie Wasser-Luftattraktionen
aquatiques disposant d'introduction et d'extraction
d'eau/d'air
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 136.
This draft amendment A2, if approved, will modify the European Standard EN 13451-3:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13451-3:2011/FprA2:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13451-3:2011/kFprA2:2013
EN 13451-3:2011/FprA2:2013 (E)
Contents Page
Foreword .3
1 Modifications to 4.6.1 .4
2 Modifications to 4.9.7 .4
3 Modifications to 5.2.2.1 .5
4 Modification to 5.2.6.1 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.