TP080 - Pravilnik o tehničnih ukrepih in zahtevah za varno obratovanje kopališč in za varstvo pred utopitvami na kopališčih

This part of EN 13451 specifies safety requirements for ladders, stepladders and handle bends in addition to the general safety requirements of EN 13451-1.
The requirements of this specific standard take priority over those in EN 13451-1.
This part of EN 13451 is applicable to manufactured ladders, stepladders and handle bends used for pool access and egress for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.

This European Standard is applicable to water slides as defined in EN 1069 1:2010, 3.3.
This European Standard establishes the instructions for use, operation and maintenance as well as the documentation and commissioning of water slides.

This European Standard specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1:2011.
The requirements of this specific standard take priority over those in EN 13451-1:2011.
This part of EN 13451 is applicable to swimming pool equipment designed for:
-   the introduction and/or extraction of water for treatment or leisure purposes;
-   the introduction of air for leisure purposes;
-   water leisure features involving the movement of water.
NOTE   The above items are identified with the general term devices.

New findings in the field of swimming pool water and bath water hygiene as well as technical development of the corresponding treatment processes necessitated a revision of the standard series DIN 19643. As a result the standards - DIN 19643-1 "Treatment of water of swimming pools and baths - Part 1: General requirements"; - DIN 19643-2 "Treatment of water of swimming pools and baths - Part 2: Combinations of process with fixed bed filters and precoat filters"; - DIN 19643-3 ("Treatment of water of swimming pools and baths - Part 3: Combinations of process with ozonization"); - DIN 19643-4 "Treatment of water of swimming pools and baths - Part 4: Combinations of process with ultrafiltration" which have been prepared by Working Committee NA 119-04-13 AA "Schwimmbeckenwasser" ("Pool water") at the Water Practice Standards Committee (NAW) are now available. Part 1 applies for the treatment of water, including sea water, mineral water, medicinal water, brine (including artificial brine) and thermal water in swimming pools and bathing facilities. It does not apply for the treatment of water in family pools and water in facilities with biologically treated water. The aim of this document is to ensure good, consistent quality of pool water with regard to hygiene, safety and aesthetics so there are no concerns regarding damage to human health, especially by pathogens. In this respect the well-being of bathers (for example, by minimizing secondary reaction products of disinfection) shall also be considered. For this purpose, water quality, dimensioning, operating and control requirements are specified. Treatment requirements to achieve this aim are stated.

This part of EN 13451 specifies safety requirements for starting platforms in addition to the general safety requirements of EN 13451-1:2011 and should be read in conjunction within it.
The requirements of this specific standard take priority over those in EN 13451-1:2011.
This part of EN 13451 is applicable to manufactured starting platforms for use in competition and training in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

EN 13451-5 specifies safety requirements for lane lines and dividing line in addition to the general safety requirements of EN 13451-1:2011 and should be read in conjunction within it. The requirements of this specific standard take priority over those in EN 13451-1:2011. This part of EN 13451 is applicable to manufactured lane lines for use in competition and training and dividing line for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

This part of EN 136.008 specifies safety requirements for water polo goals in addition to the general safety requirements of prEN 136.008-1. The requirements of this specific standard take priority over those in the general standard. This part of prEN 136.008 is applicable to manufactured water polo goals for use in competition and training.

This part of EN 136.008 specifies safety requirements for turning boards in addition to the general safety requirements of prEN 136.008-1. The requirements of this specific standard take priority over those in the general standard. This part of EN 136.008 is applicable to manufactured turning boards for use in competition and training.

This European Standard specifies general safety requirements and test methods for equipment used in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
Where specific standards exist, this general standard should not be used alone.
Special care is required in applying this general standard alone to equipment for which no product specific standard has yet been published.