iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 27434:1996

(Main)

Slotted set screws with cone point (ISO 7434:1983)

Slotted set screws with cone point (ISO 7434:1983)

Specifies the characteristics of products with metric dimensions and thread sizes from M 1,2 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,2 up to M 12 with nominal lengths from 2 mm up to 60mm; gives an example for the designation.

Gewindestifte mit Schlitz und Spitze (ISO 7434:1983)

Vis sans tete, fendues, a bout pointu (ISO 7434:1983)

La présente Norme internationale spécifie les caractéristiques des vis sans tête, fendues, à bout pointeau, de diamètre nominal de filetage M 1,2 à M 12 inclus et de grade A. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898, ISO 965, ISO 3506, 4759/1.

Navojni zatiči z zarezo in končino s konico (ISO 7434:1983)

General Information

Status
Withdrawn
Publication Date
31-Mar-1996
Withdrawal Date
07-Jul-2024
ICS
21.060.10 - Bolts, screws, studs
Technical Committee
ISEL - Mechanical elements
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Jul-2024
Due Date
31-Jul-2024
Completion Date
08-Jul-2024
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 27434:1992 - Slotted set screws with cone point (ISO 7434:1983)

Relations

Revised
SIST EN ISO 7434:2024 - Fasteners - Slotted set screws with cone point (ISO 7434:2024)
Effective Date
19-Jan-2023

Buy Standard

EN 27434:1996EN 27434:1996
PreviousNext
Standard
EN 27434:1996
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1996
1DYRMQL]DWLþL]]DUH]RLQNRQþLQRVNRQLFR ,62
Slotted set screws with cone point (ISO 7434:1983)
Gewindestifte mit Schlitz und Spitze (ISO 7434:1983)
Vis sans tete, fendues, a bout pointu (ISO 7434:1983)
Ta slovenski standard je istoveten z: EN 27434:1992
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

--
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 2702:2023(Main)
Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
EN ISO 2702:2022

This document specifies the mechanical and physical properties of heat treated tapping screws made of steel, with thread sizes ST2,2 to ST9,5 in accordance with ISO 1478, when tested at the ambient temperature range of 10 °C to 35 °C, and the related test methods.
Tapping screws are designed to form mating threads in sheet metals, without their own threads being deformed. Tapping screws are not intended to be pretensioned by design, even though they can experience varying degrees of low-level tensile stress after installation.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7380-1:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
EN ISO 7380-1:2023

This document specifies the characteristics of hexagon socket button head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If, in certain cases, other specifications are requested, stainless steel grades can be selected from ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7380-2:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
EN ISO 7380-2:2023

This document specifies the characteristics of hexagon socket button head screws with collar, with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If in certain cases other specifications are requested, dimensional options can be selected from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14581:2023(Main)
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)
EN ISO 14581:2023

This document specifies the characteristics of hexalobular socket countersunk flat head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M10, and with product grade A.
If in certain cases other specifications are requested, stainless steel grades can be selected from ISO 3506‑1, and dimensional options from ISO 888 or ISO 4753.
NOTE 1   The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 3.
NOTE 2   Hexalobular socket countersunk head screws (high head), with full loadability are specified in ISO 14582, but these products are not interchangeable, because of different head heights.
NOTE 3   Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8676:2022(Main)
Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)
EN ISO 8676:2022

This document specifies the characteristics of hexagon head screws, in steel and stainless steel, with
metric fine pitch threads M8×1 to M64×4, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be
selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4017:2022(Main)
Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022)
EN ISO 4017:2022

This document specifies the characteristics of hexagon head screws, in steel and stainless steel, with
metric coarse pitch threads M1,6 to M64, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be
selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4014:2022(Main)
Fasteners - Hexagon head bolts - Product grades A and B (ISO 4014:2022)
EN ISO 4014:2022

This document specifies the characteristics of hexagon head bolts, in steel and stainless steel, with
metric coarse pitch threads M1,6 to M64, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be
selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4015:2022(Main)
Fasteners - Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) - Product grade B (ISO 4015:2022)
EN ISO 4015:2022

This document specifies the characteristics of hexagon head bolts with reduced shank (shank diameter
approximately equal to pitch diameter), in steel and stainless steel, with metric coarse pitch threads
M3 to M20, and with product grade B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be
selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.
NOTE For hexagon head bolts with full shank, see ISO 4014.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4018:2022(Main)
Fasteners - Hexagon head screws - Product grade C (ISO 4018:2022)
EN ISO 4018:2022

This document specifies the characteristics of hexagon head screws, in steel, with metric coarse pitch
threads M5 to M64, and with product grade C.
If in certain cases other specifications are requested, property classes can be selected from ISO 898-1,
and dimensional options from ISO 888 or ISO 4753.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8765:2022(Main)
Fasteners - Hexagon head bolts, with fine pitch thread - Product grades A and B (ISO 8765:2022)
EN ISO 8765:2022

This document specifies the characteristics of hexagon head bolts, in steel and stainless steel, with
metric fine pitch threads M8×1 to M64×4, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be
selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day