SIST EN 622-4:2019
(Main)Fibreboards - Specifications - Part 4: Requirements for softboards
Fibreboards - Specifications - Part 4: Requirements for softboards
This document specifies the requirements for softboards as defined in EN 316, with a density ≥ 230 kg/m3 to 400 kg/m3.
The values listed in this document relate to product properties but they are not characteristic values to be used in design calculations.
NOTE Panels which are intended for use exclusively as thermal insulating products are covered by EN 13171.
Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten
Dieses Dokument legt die Anforderungen an poröse Platten nach EN 316 mit einer Rohdichte von 230 kg/m3 bis 400 kg/m3 fest.
Die in diesem Dokument angegebenen Werte beziehen sich auf Produkteigenschaften; es sind keine charakteristischen Werte, die für konstruktive Berechnungen verwendet werden können.
ANMERKUNG Für Platten, die ausschließlich zur Verwendung als Wärmedämmprodukte vorgesehen sind, gilt EN 13171.
Panneaux de fibres - Exigences - Partie 4 : Exigences pour panneaux isolants
La présente Norme européenne spécifie les exigences pour panneaux isolants tels que définis dans l'EN 316 avec une masse volumique ≥ 230 kg/m3 à 400 kg/m3.
Les valeurs données dans la présente Norme européenne concernent les caractéristiques du produit, mais ne sont pas les valeurs caractéristiques à utiliser dans les calculs de conception.
NOTE Les panneaux destinés à être utilisés uniquement comme panneaux isolants thermiques sont couverts par la norme EN 13171.
Vlaknene plošče - Specifikacije - 4. del: Zahteve za mehke plošče
Ta dokument določa zahteve za mehke plošče, kot so opredeljene v standardih EN 316, z gostoto ≥ od 230 kg/m3 do 400 kg/m3.
Vrednosti, naštete v tem dokumentu, se navezujejo na lastnosti izdelka, vendar niso značilne vrednosti za uporabo v projektnih izračunih.
OPOMBA: Paneli, ki so predvideni izključno za uporabo kot toplotnoizolacijski proizvodi, so zajeti v standardu EN 13171.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 622-4:2019
01-september-2019
Nadomešča:
SIST EN 622-4:2010
Vlaknene plošče - Specifikacije - 4. del: Zahteve za mehke plošče
Fibreboards - Specifications - Part 4: Requirements for softboards
Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten
Panneaux de fibres - Exigences - Partie 4 : Exigences pour panneaux isolants
Ta slovenski standard je istoveten z: EN 622-4:2019
ICS:
79.060.20 Vlaknene in iverne plošče Fibre and particle boards
SIST EN 622-4:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 622-4:2019
---------------------- Page: 2 ----------------------
SIST EN 622-4:2019
EN 622-4
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 79.060.20 Supersedes EN 622-4:2009
English Version
Fibreboards - Specifications - Part 4: Requirements for
softboards
Panneaux de fibres - Exigences - Partie 4 : Exigences Faserplatten - Anforderungen - Teil 4: Anforderungen
pour panneaux isolants an poröse Platten
This European Standard was approved by CEN on 3 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 622-4:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 622-4:2019
EN 622-4:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 6
4.1 General . 6
4.2 Requirements for general purpose boards . 6
4.2.1 Requirements for boards for use in dry conditions . 6
4.2.2 Requirements for boards for use in humid conditions . 7
4.2.3 Requirements for boards for use in external conditions. 7
4.3 Requirements for load-bearing boards . 7
4.3.1 Requirements for boards for use in dry conditions . 7
4.3.2 Requirements for boards for use in humid conditions . 8
5 Verification of compliance . 8
5.1 General .
...
SLOVENSKI STANDARD
oSIST prEN 622-4:2018
01-junij-2018
9ODNQHQHSORãþH6SHFLILNDFLMHGHO =DKWHYH]DPHKNHSORãþH
Fibreboards - Specifications - Part 4: Requirements for softboards
Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten
Panneaux de fibres - Exigences - Partie 4 : Exigences pour panneaux isolants
Ta slovenski standard je istoveten z: prEN 622-4
ICS:
79.060.20 9ODNQHQHLQLYHUQHSORãþH Fibre and particle boards
oSIST prEN 622-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 622-4:2018
---------------------- Page: 2 ----------------------
oSIST prEN 622-4:2018
DRAFT
EUROPEAN STANDARD
prEN 622-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2018
ICS 79.060.20 Will supersede EN 622-4:2009
English Version
Fibreboards - Specifications - Part 4: Requirements for
softboards
Panneaux de fibres - Exigences - Partie 4 : Exigences Faserplatten - Anforderungen - Teil 4: Anforderungen
pour panneaux isolants an poröse Platten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 112.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 622-4:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 622-4:2018
prEN 622-4:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 6
4.1 General . 6
4.2 Requirements for general purpose boards . 6
4.2.1 Requirements for boards for use in dry conditions . 6
4.2.2 Requirements for boards for use in humid conditions . 6
4.2.3 Requirements for boards for use in external conditions. 7
4.3 Requirements for load-bearing boards . 7
4.3.1 Requirements for boards for use in dry conditions . 7
4.3.2 Requirements for boards for use in humid conditions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.