SIST EN 60745-2-6:2003/A11:2007

Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers

Superseded by EN 60745-2-6:2010

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-6: Besondere Anforderungen für Hämmer

Outils électroportatifs à moteur - Sécurité -- Partie 2-6: Règles particulières pour les marteaux

Ročna električna orodja - Varnost - 2-6. del: Posebne zahteve za kladiva

General Information

• Status: Withdrawn
• Publication Date: 22-Apr-2007
• Withdrawal Date: 18-Oct-2020
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Oct-2020
• Due Date: 11-Nov-2020
• Completion Date: 19-Oct-2020
• Directive: 98/37/EC - Machinery
• Ref Project: EN 60745-2-6:2003/A11:2007 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

Relations

• Amends: SIST EN 60745-2-6:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
• Effective Date: 01-May-2007
• Replaced By: SIST EN 60745-2-6:2010 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified + A1:2006 + A2:2008)
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 60745-2-6:2010 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified + A1:2006 + A2:2008)
• Effective Date: 07-Jun-2022
• Amends: SIST EN 60745-2-6:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
• Effective Date: 29-Jan-2023
• Amends: SIST EN 60745-2-6:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-6:2003/A11:2007
01-maj-2007
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DNODGLYD
Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for
hammers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-6: Besondere
Anforderungen für Hämmer
Outils électroportatifs a moteur - Sécurité - Partie 2-6: Regles particulieres pour les
marteaux
Ta slovenski standard je istoveten z: EN 60745-2-6:2003/A11:2007
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
25.140.30 2URGMD]DURþQRXSRUDER Hand-operated tools
SIST EN 60745-2-6:2003/A11:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60745-2-6/A11

NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM

ICS 25.140.20


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-6: Particular requirements for hammers



Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-6: Règles particulières Sicherheit -
pour les marteaux Teil 2-6: Besondere Anforderungen
für Hämmer





This amendment A11 modifies the European Standard EN 60745-2-6:2003; it was approved by CENELEC on
2006-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-6:2003/A11:2007 E

---------------------- Page: 2 ----------------------

EN 60745-2-6:2003/A11:2007 – 2 –
Foreword
This amendment to the European Standard EN 60745-2-6:2003 was prepared by the Technical
Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools,
during its meeting held in Malta on 2005-04-14.
The text of the draft was submitted to the formal vote and was approved by CENELEC as amendment
A11 to EN 60745-2-6:2003 on 2006-10-01.
This amendment enables EN 60745-2-6 to be read with EN 60745-1:2006.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-10-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-10-01
_________________

---------------------- Page: 3 ----------------------

– 3 – EN 60745-2-6:2003/A11:2007
Foreword
th
Replace the 6 paragraph by the following:
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of EC
Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC. See Annex ZZ.
th th
Replace the 10 and 11 paragraph by the following:
This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2.
This Part 2-6 is to be used in conjunction with EN 60745-1:2006. When this standard states "addition",
"modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.
6 Environmental requirements
6.1.2.5.103
Replace the existing Table Z104 by the following:
Table Z104 — Noise test conditions for rotary hammers
Orientation Drilling vertically down into a concrete block having the formulation specified in
Table Z102 and having the minimum dimensions 500 mm x 500 mm and
200 mm in height and supported on resilient material. The concrete block, its
support and the tool shall be so oriented that the geometric centre of the tool is
1 m above the reflecting plane. The centre of the concrete block shall be
located under the top microphone
Tool bit Drill bit as recommended by the manufacturer for drilling in concrete and of the
size defined in Table Z103
Feed force The feed force applied to the tool in addition to its weight shall be just sufficient
to ensure stable operation
Test cycle Measurement starts when the drill bit has reached a depth equal to its diameter
and stops when the depth has reached 80 % of its usable length or 180 mm,
whichever is shorter
Remove the existing Subclause 6.2.2.4.
Add the following:
6.2.4.2 Location of measurement
Addition:
Figures Z107 and Z108 show the transducer positions for different types of hammers.
6.2.6.3 Operating conditions
Addition:
If rotary hammers have a chiselling (non rotary) function, they shall be tested in the chiselling and
rotary hammer function according to 6.2.6.3.101 and 6.2.6.3.102.

---------------------- Page: 4 ----------------------

EN 60745-2-6:2003/A11:2007 – 4 –
During the test, an auxiliary han
...