iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 174:1998

(Main)

Personal eye protection - Ski goggles for downhill skiing

Personal eye protection - Ski goggles for downhill skiing

This European Standard is applicable to goggles which are used for eye-protection during downhill skiing.

Persönlicher Augenschutz - Skibrillen für alpinen Skilauf

Diese Europäische Norm gilt für Skibrillen, die zum Augenschutz beim alpinen Skilauf verwendet werden.

Protection individuelle de l'oeil - Masques pour le ski alpin

La présente norme européenne est applicable aux masques utilisés pour la protection oculaire pendant le ski alpin.

Osebno varovanje oči - Smučarska očala

General Information

Status
Withdrawn
Publication Date
31-Mar-1998
Withdrawal Date
30-Nov-2001
ICS
13.340.20 - Head protective equipment
97.220.20 - Winter sports equipment
Technical Committee
OVP - Personal protecting equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2001
Due Date
01-Dec-2001
Completion Date
01-Dec-2001
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/BC/CEN/90/2 - Order for standardization concerning Personal Protective Equipment (P.P.E.)
Ref Project
EN 174:1996 - Personal eye protection - Ski goggles for downhill skiing

Relations

Replaced By
SIST EN 174:2001 - Personal eye-protection - Ski goggles for downhill skiing
Effective Date
01-Dec-2001

Buy Standard

EN 174:1998EN 174:1998
PreviousNext
Standard
EN 174:1998
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Persönlicher Augenschutz - Skibrillen für alpinen SkilaufProtection individuelle de l'oeil - Masques pour le ski alpinPersonal eye protection - Ski goggles for downhill skiing97.220.20Oprema za zimske športeWinter sports equipment13.340.20Varovalna oprema za glavoHead protective equipment
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 18527-1:2022(Main)
Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
EN ISO 18527-1:2022

This International Standard applies to all afocal (plano power) goggles, intended for eye protection against
hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding
and other activities with similar hazards and no greater risks.
It deals with materials, construction, optical properties, testing, labelling and marking.
Requirements for the marking of goggles and for information to be supplied by the manufacturer are also
specified.
Information on the selection and use of ski and snow-boarding goggles is given in Annex A.
This International Standard does not apply to:
a) eyewear for protection when operating or travelling on a motorized vehicle;
b) eyewear for protection against radiation from artificial light sources, such as those used in
solaria;
c) eyewear for direct observation of the sun;
d) eye protectors intended for sports with unrelated hazards and risks.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10256-2:2018(Main)
Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO 10256-2:2016)
EN ISO 10256-2:2018

This International Standard specifies performance requirements and test methods for head protectors for use in ice hockey and shall be used in conjunction with ISO 10256-1.
Note 1   The requirements of a clause take precident over a figure.   
Note 2   The intent of this International Standard is to reduce the risk of injury to the head without compromising the form or appeal of the game.
Note 3   Ice hockey is a sport in which there is a risk of injury.  This International Standard is intended only for helmets  used for ice hockey.  Ice hockey helmets afford no protection from neck or spinal injury. Severe head, brain or spinal injuries, including paralysis or death, may occur in spite of using an ice hockey helmet in accordance with this International Standard.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)   Construction and coverage
b)   shock absorption
c)   penetration
d)   retention system properties
e)   field of vision
f)   marking and information.
This International Standard applies to head protectors worn  by
a)   Players other than goalkeepers; and
b)   certain functionaries (e.g. referees).

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10256-4:2018(Main)
Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO 10256-4:2016)
EN ISO 10256-4:2018

This International Standard covers performance requirements for ice hockey goalkeeper head and face protectors. It is to be used in conjunction with ISO 10256-1, 10256-2 and 10256-3.
The intent of this International Standard is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.
Performance requirements are established, where appropriate for the following:
a) materials, assembly, and design;
b) protected areas (coverage) and penetration resistance;
c) shock absorption;
d) puck impact resistance;
e) retention; and
f) optical quality.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10256-3:2018(Main)
Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016)
EN ISO 10256-3:2018

This International Standard specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and shall be used in conjuction with ISO 10256-1.
Note 1   The requirements of a clause take precident over a figure.   
Note 2   The intent is to reduce the risk of injury to the face without compromising the form or appeal of the game.
Note 3   Ice hockey is a sport in which there is a risk of injury.  This International Standard is intended only for face protectors used for ice hockey.  Ice hockey face protectors afford no protection from neck or spinal injury. Severe head, brain or spinal injuries, including paralysis or death, may occur in spite of using an ice hockey face protector in accordance with this International Standard.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)   Construction and area of coverage
b)   resistance to puck impact
c)   penetration
d)   field of view and scotoma
e)   geometric (visual) optics and acuity
f)   transmittance and haze
g)   marking and information.
This International Standard applies to  face protectors worn  by:
a)   players other than goalkeepers; and
b)   certain functionaries (e.g. referees).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10256-1:2017(Main)
Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2016)
EN ISO 10256-1:2016

This part of ISO 10256 specifies general requirements for head, face, neck and body protectors
(hereafter referred to as protectors) for use in ice hockey.
This part of ISO 10256 is intended only for protectors used for ice hockey. Requirements are given for
the following:
a) terms and definitions;
b) innocuousness;
c) ergonomics;
d) test report;
e) permanent markings;
f) information for users.
In the ISO 10256 series, collateral standards specify performance requirements for protectors for use
in ice hockey and are intended to be read in conjunction with this part of ISO 10256.
NOTE 1 The requirements of a clause take precedence over a figure.
NOTE 2 The intent is to reduce the risk of injury to an ice hockey player without compromising the form or
appeal of the game. These standards presume that the rules of play for ice hockey will be followed by players and
enforced by officials.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13484:2012(Main)
Helmets for users of luges
EN 13484:2012

This European Standard specifies the minimum performance requirements and test methods for helmets for users of luges in competition in ice channels.
Requirements and the corresponding methods of test, where appropriate, are given for the following:
-   construction including field of vision;
-   shock absorbing properties;
-   resistance to penetration;
-   retention system properties;
-   marking and information.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13781:2012(Main)
Protective helmets for drivers and passengers of snowmobiles and bobsleighs
EN 13781:2012

This European Standard specifies requirements and test methods for protective helmets for drivers and passengers of snowmobiles and bobsleighs.
Additional requirements for eye protectors and face shields are specified in EN 13178.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1077:2007(Main)
Helmets for alpine skiers and snowboarders
EN 1077:2007

This European Standard is applicable to performance requirements and tests for two classes of helmets for alpine skiers, snowboarders and for similar groups, including children and participants in competitions. The standard comprises two different classes of protection, class A and class B.
Requirements and the corresponding methods of test, where appropriate, are given for the following:
-   construction including field of vision;
-   shock absorbing properties;
-   resistance to penetration;
-   retention system properties;
-   marking and information.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13178:2000(Main)
Personal eye-protection - Eye protectors for snowmobile users
EN 13178:2000

This EN specifies requirements and test methods for eye protectors for snowmobile users. They are intended to protect the user from risks of mechanical impacts, corneal freezing, and from factors which may adversely affect the wearer's vision, such as UV radiation, sunglare and fogging.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 10256-2:2022(Main)
Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO/DIS 10256-2:2021)
prEN ISO 10256-2
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day