SIST EN 61240:2002

Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules

Sets out general rules for drawing all dimensional anad geometrical characteristics of a surface-mounted piezoelectric device package in order to ensure mechanical interchangeability of all outline drawings.

Piezoelektrische Bauelemente - Anfertigung von Gehäusezeichnungen von oberflächenmontierbaren Bauelementen (SMDs) zur Frequenzstabilisierung und -Selektion - Allgemeine Regeln

Dispositifs piézoélectriques - Préparation des dessins d'encombrement des dispositifs à montage en surface pour la commande et le choix de la fréquence - Règles générales

Donne les règles générales pour dessiner toutes les caractéristiques dimensionnelles et géométriques d'un boîtier à montage en surface afin d'assurer une présentation uniforme et l'interchangeabilité mécanique avec tous les autres dessins d'encombrement.

Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules (IEC 61240:1994)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 05-Feb-2017
• ICS: 31.140 - Piezoelectric devices
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Feb-2017
• Due Date: 26-Feb-2017
• Completion Date: 06-Feb-2017
• Ref Project: EN 61240:1997 - Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules

Relations

• Revised: SIST EN 61240:2012 - Piezoelectric devices - Preparation of outline drawings of surface-mounted device (SMD) for frequency control and selection - General rules
• Effective Date: 06-May-2014
• Replaced By: SIST EN 61240:2012 - Piezoelectric devices - Preparation of outline drawings of surface-mounted device (SMD) for frequency control and selection - General rules
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 61240:2012 - Piezoelectric devices - Preparation of outline drawings of surface-mounted device (SMD) for frequency control and selection - General rules
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 61240:2012 - Piezoelectric devices - Preparation of outline drawings of surface-mounted device (SMD) for frequency control and selection - General rules
• Effective Date: 11-Jan-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61240:2002
01-september-2002
Piezoelectric devices - Preparation of outline drawings of surface-mounted
devices (SMD) for frequency control and selection - General rules (IEC 61240:1994)
Piezoelectric devices - Preparation of outline drawings of surface-mounted devices
(SMD) for frequency control and selection - General rules
Piezoelektrische Bauelemente - Anfertigung von Gehäusezeichnungen von
oberflächenmontierbaren Bauelementen (SMDs) zur Frequenzstabilisierung und -
Selektion - Allgemeine Regeln
Dispositifs piézoélectriques - Préparation des dessins d'encombrement des dispositifs à
montage en surface pour la commande et le choix de la fréquence - Règles générales
Ta slovenski standard je istoveten z: EN 61240:1997
ICS:
31.140 3LH]RHOHNWULþQHLQ Piezoelectric and dielectric
GLHOHNWULþQHQDSUDYH devices
SIST EN 61240:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61240:2002

---------------------- Page: 2 ----------------------

SIST EN 61240:2002

---------------------- Page: 3 ----------------------

SIST EN 61240:2002

---------------------- Page: 4 ----------------------

SIST EN 61240:2002

---------------------- Page: 5 ----------------------

SIST EN 61240:2002

---------------------- Page: 6 ----------------------

SIST EN 61240:2002
NORME
CEI
INTERNATIONALE IEC
1240
INTERNATIONAL
Première édition
STANDARD
First edition
1994-11
Dispositifs piézoélectriques -
Préparation des dessins d'encombrement
des dispositifs à montage en surface pour
la commande et le choix de la fréquence -
Règles générales
Piezoelectric devices -
Preparation of outline drawings of
surface-mounted devices (SMD)
for frequency control and selection -
General rules
0ç CEI 1994 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans raccord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
PRICE CODE
Met iyuapo iiaa
IEC 3neKrporexHH4ecliaR HOMUCCNR
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61240:2002
— 3 —
1240 ©IEC:1994
CONTENTS
Page
FOREWORD 5
Clause
1 General 7
Classification of SMD 7
2
Title of the outline drawing 7
3
9
4 Composition of the outline drawing
9
5 Requirements for terminal leads
9
Requirements for the terminal land area (see figure 2)
6
11 7 Connections of terminal leads
11
8 Descriptive notes
11
9 References
12
Figures
Annex A 19

---------------------- Page: 8 ----------------------

SIST EN 61240:2002
1240 ©IEC:1994 - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
PIEZOELECTRIC DEVICES -
Preparation of outline drawings of surface-mounted devices (SMD)
for frequency control and selection -
General rules
FOREWORD
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
1)
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
3) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 1240 has been prepared by IEC technical committee 49:
Piezoelectric and dielectric devices for frequency control and selection.
The text of this standard is based on the following documents:
DIS Report on voting
49/278/RVD
49(CO)276
Full information on the voting for the approval of this standard can be found in the report
on voting indicated in the above table.

---------------------- Page: 9 ----------------------

SIST EN 61240:2002
1240©IEC:1994 - 7 -
PIEZOELECTRIC DEVICES -
Preparation of outline drawings of surface-mounted devices (SMD)
for frequency control and selection -
General rules
1 General
1.1 Scope and object
This International Standard sets out general rules for drawing all dimensional and geo-
metrical characteristics of a surface-mounted piezoelectric device package (referred to
in this standard as SMD) in order to ensure mechanical interchangeability of all outline
drawings of the SMDs for frequency control and selection.
1.2
Normative references
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this International Standard. At the time of publication, the
editions indicated were valid. All normative documents are subject to revision, and parties
to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated
below. Members of IEC and ISO maintain registers of currently valid International
Standards.
Mechanical standardization of semiconductor devices - Part 6: General
IEC 191-6: 1990,
rules for the preparation of outline drawings of surface-mounted semiconductor packages
ISO 1101: 1983, Technical drawings - Geometrical tolerancing - Tolerancing of form,
orientation, location and run-out - Generalities, definitions, symbols, indications on
drawings
2 Classification of SMD
The SMD piezoelectric devices are classified into three types of packages depending on
the structure of the terminal leads.
a) Leaded type: the folded ends of the terminal leads are turned away from the body.
b) Fol
...