SIST ISO 13543:1998
(Main)Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal in a lot
Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal in a lot
Concentrés sulfurés de cuivre, de plomb et de zinc -- Détermination de la masse de métal contenu dans un lot
Bakrovi, svinčevi in cinkovi sulfidni koncentrati - Določevanje mase kovine v vzorcu
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL
IS0
STANDARD 13543
First edition
1996-07-01
Copper, lead and zinc sulfide
concentrates - Determination of mass
of contained metal in a lot
Concentrh sulfur& de cuivre, de plomb et de zinc - D&termination de
la masse de m&al contenu dans un lot
Reference number
IS0 13543:1996(E)
---------------------- Page: 1 ----------------------
IS0 13543:1996(E)
Foreword
Standardization) is a worldwide fed-
IS0 (the International Organization for
eration of national standards bodies IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each membe body interested in a subject for
which a technical committee has beet established has the right to be rep-
resented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. IS0 col-
laborates closely with the International Electrotechnical Commission (IEC)
on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are cir-
culated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 13543 was prepared by Technical Committee
ISO/TC 183, Copper, lead and zinc ores and concentrates.
Annex A of this International Standard is for information only.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be repro-
duced or utilized in any form or by any m eans, electron ic or mechanical, including photo-
copying and microfilm, without permission i n writing from the publisher.
International Orga nization for Standardization
Case Postale 56 l 1 CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland
ii
---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD @ IS0 IS0 13543:1996(E)
Copper, lead and zinc sulfide concentrates -
.Determination of mass of contained metal in a lot
3.1 lot: Quantity of concentrate to be sampled.
1 Scope
3.2 wet mass of the lot: Combined mass of con-
This International Standard specifies the method for
centrate and moisture of the lot at the time of weigh-
determining the mass of contained metal in a lot,
ing and sampling.
based on the wet mass, moisture content and dry
basis metal content of the lot. The procedure for es-
3.3 moisture determination: Quantitative measure-
timating the variance and confidence intervals for the
ment of the mass loss of the moisture test portion
mass of contained metal is also specified.
under the conditions of drying specified in IS0 10251.
3.4 chemical analysis: Quantitative determination
2 Normative references
of the required chemical constituents of the analysis
test portion.
The following standards contain provisions which,
through reference in this text, constitute provisions of
3.5 precision: Measure of the random variations
this International Standard. At the time of publication,
within a set of measurements.
the editions indicated were valid. All standards are
subject to revision, and parties to agreements based
3.6 dry mass of the lot: Mass of concentrate in
on this International Standard are encouraged to in-
the lot after correcting for the mass of moisture in the
vestigate the possibility of applying the most recent
lot .
editions of the standards indicated below. Members
of IEC and IS0 maintain registers of currently valid
International Standards.
4 Determination of mass of contained
IS0 10251:- 1), Copper, lead and zinc sulfide concen-
metal
Determination of mass loss of bulk material
trates -
on drying.
The mass of contained metal in a lot is determined
IS0 12743:-
1), Copper, lead and zinc sulfide concen-
from measurements of the wet mass, moisture con-
tra tes - Sampling procedures for determination of
tent and dry basis metal content.
metal and moisture con tent.
IS0 12744: --I), Copper, lead and zinc sulfide concen-
4.1 Wet mass of the lot
tra tes - Experimental methods for checking the pre-
cision of sampling.
The wet mass of the lot shall be determined using
static scales, belt scales or draft surveys. However,
IS0 12745: -I), Copper, lead and zinc sulfide concen-
due to their superior precision, static scales are rec-
trates - Precision and bias of mass measurement
ommended.
techniques.
4.2 Moisture content of the lot
3 Definitions
Samples for moisture determination shall be collected
in accordance with IS0 12743. The moisture content
For the purposes of this International Standard the of the lot shall be determined according to the pro-
following definitions apply. cedure specified in IS0 10251.
I) To be published.
1
---------------------- Page: 3 ----------------------
@ IS0
IS0 13543:1996(E)
where
4.3 Metal content of the lot
mM is the mass of contained metai in the lot, in
Samples for chemical analysis shall be collected in
kilograms;
accordance with IS0 12743 and analysed in accord-
ance with the relevant IS0 chemical analysis stan-
rnw is the wet mass of lot, in tonnes;
dards.
F is the moisture factor;
is the precious metal content of the lot on a
aL
4.4 Dry mass of the lot
dry basis, in grams per tonne (m/m).
Calculate the dry mass of the lot using the following
equation:
. . . (1)
5 Determination of variance of mass of
contained metal
where
The variance of the mass of contained metal in the lot
mD is the dry mass of the lot, in tonnes;
can be determined from equation (3) by taking the
partial derivatives with respect to the wet mass, the
mW is the wet mass of the lot, in tonnes;
moisture factor and the metal content of the lot as
M is the moisture content of the lot, in percent
follows:
of the wet mass (m/m).
. . . (6)
s;=[$~S$+[$$+[$$;
4.5 Mass of contained metal
where
4.5.1 Major elements
$, is the estimated variance of the mass of con-
For the major elements copper, lead and zinc, the
tained metal in the lot;
mass of contained metal in the lot is given by the
$, is the estimated variance of the wet mass of
equation:
the lot;
mD aL
2
=- . . . is the estimated total variance of the mois-
(2)
mM sF
100
ture factor = (sH/l OO)*
with SH being the total precision (1 standard
where
deviation) of moisture determination;
mM is the mass of contained metal in the lot, in
2
is the estimated total variance of the metal
tonnes; sT
content of th
...
SLOVENSKI STANDARD
SIST ISO 13543:1998
01-november-1998
%DNURYLVYLQþHYLLQFLQNRYLVXOILGQLNRQFHQWUDWL'RORþHYDQMHPDVHNRYLQHY
Y]RUFX
Copper, lead and zinc sulfide concentrates -- Determination of mass of contained metal
in a lot
Concentrés sulfurés de cuivre, de plomb et de zinc -- Détermination de la masse de
métal contenu dans un lot
Ta slovenski standard je istoveten z: ISO 13543:1996
ICS:
73.060.99 Druge rude Other metalliferous minerals
SIST ISO 13543:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 13543:1998
---------------------- Page: 2 ----------------------
SIST ISO 13543:1998
INTERNATIONAL
IS0
STANDARD 13543
First edition
1996-07-01
Copper, lead and zinc sulfide
concentrates - Determination of mass
of contained metal in a lot
Concentrh sulfur& de cuivre, de plomb et de zinc - D&termination de
la masse de m&al contenu dans un lot
Reference number
IS0 13543:1996(E)
---------------------- Page: 3 ----------------------
SIST ISO 13543:1998
IS0 13543:1996(E)
Foreword
Standardization) is a worldwide fed-
IS0 (the International Organization for
eration of national standards bodies IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each membe body interested in a subject for
which a technical committee has beet established has the right to be rep-
resented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. IS0 col-
laborates closely with the International Electrotechnical Commission (IEC)
on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are cir-
culated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 13543 was prepared by Technical Committee
ISO/TC 183, Copper, lead and zinc ores and concentrates.
Annex A of this International Standard is for information only.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be repro-
duced or utilized in any form or by any m eans, electron ic or mechanical, including photo-
copying and microfilm, without permission i n writing from the publisher.
International Orga nization for Standardization
Case Postale 56 l 1 CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland
ii
---------------------- Page: 4 ----------------------
SIST ISO 13543:1998
INTERNATIONAL STANDARD @ IS0 IS0 13543:1996(E)
Copper, lead and zinc sulfide concentrates -
.Determination of mass of contained metal in a lot
3.1 lot: Quantity of concentrate to be sampled.
1 Scope
3.2 wet mass of the lot: Combined mass of con-
This International Standard specifies the method for
centrate and moisture of the lot at the time of weigh-
determining the mass of contained metal in a lot,
ing and sampling.
based on the wet mass, moisture content and dry
basis metal content of the lot. The procedure for es-
3.3 moisture determination: Quantitative measure-
timating the variance and confidence intervals for the
ment of the mass loss of the moisture test portion
mass of contained metal is also specified.
under the conditions of drying specified in IS0 10251.
3.4 chemical analysis: Quantitative determination
2 Normative references
of the required chemical constituents of the analysis
test portion.
The following standards contain provisions which,
through reference in this text, constitute provisions of
3.5 precision: Measure of the random variations
this International Standard. At the time of publication,
within a set of measurements.
the editions indicated were valid. All standards are
subject to revision, and parties to agreements based
3.6 dry mass of the lot: Mass of concentrate in
on this International Standard are encouraged to in-
the lot after correcting for the mass of moisture in the
vestigate the possibility of applying the most recent
lot .
editions of the standards indicated below. Members
of IEC and IS0 maintain registers of currently valid
International Standards.
4 Determination of mass of contained
IS0 10251:- 1), Copper, lead and zinc sulfide concen-
metal
Determination of mass loss of bulk material
trates -
on drying.
The mass of contained metal in a lot is determined
IS0 12743:-
1), Copper, lead and zinc sulfide concen-
from measurements of the wet mass, moisture con-
tra tes - Sampling procedures for determination of
tent and dry basis metal content.
metal and moisture con tent.
IS0 12744: --I), Copper, lead and zinc sulfide concen-
4.1 Wet mass of the lot
tra tes - Experimental methods for checking the pre-
cision of sampling.
The wet mass of the lot shall be determined using
static scales, belt scales or draft surveys. However,
IS0 12745: -I), Copper, lead and zinc sulfide concen-
due to their superior precision, static scales are rec-
trates - Precision and bias of mass measurement
ommended.
techniques.
4.2 Moisture content of the lot
3 Definitions
Samples for moisture determination shall be collected
in accordance with IS0 12743. The moisture content
For the purposes of this International Standard the of the lot shall be determined according to the pro-
following definitions apply. cedure specified in IS0 10251.
I) To be published.
1
---------------------- Page: 5 ----------------------
SIST ISO 13543:1998
@ IS0
IS0 13543:1996(E)
where
4.3 Metal content of the lot
mM is the mass of contained metai in the lot, in
Samples for chemical analysis shall be collected in
kilograms;
accordance with IS0 12743 and analysed in accord-
ance with the relevant IS0 chemical analysis stan-
rnw is the wet mass of lot, in tonnes;
dards.
F is the moisture factor;
is the precious metal content of the lot on a
aL
4.4 Dry mass of the lot
dry basis, in grams per tonne (m/m).
Calculate the dry mass of the lot using the following
equation:
. . . (1)
5 Determination of variance of mass of
contained metal
where
The variance of the mass of contained metal in the lot
mD is the dry mass of the lot, in tonnes;
can be determined from equation (3) by taking the
partial derivatives with respect to the wet mass, the
mW is the wet mass of the lot, in tonnes;
moisture factor and the metal content of the lot as
M is the moisture content of the lot, in percent
follows:
of the wet mass (m/m).
. . . (6)
s;=[$~S$+[$$+[$$;
4.5 Mass of contained metal
where
4.5.1 Major elements
$, is the estimated vari
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.