SIST ENV 1007-5:2000

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

This part of ENV 1007 specifies the conditions for the determination of the distribution of strength and rupture strain of ceramic filaments within a multifilament tow at room temperature by performing a single tensile test on a multifilament tow. This prestandard applies to tows of continuous ceramic filaments which are assumed to act freely and idependently under loading, and behave linearly elastic up to failure.

Hochleistungskeramik - Keramische Verbundwerkstoffe Verfahren zur Prüfung von Verstärkungen - Teil 5: Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung von Fasern im Faserbündel bei Raumtemperatur

Céramiques techniques avancées - Céramiques composites - Méthodes d'essais pour les renforts - Partie 5: Détermination des distributions des résistances en traction et des déformations de traction a rupture des filaments dans un fil a température ambiante

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2000
• Withdrawal Date: 31-Dec-2003
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jan-2004
• Due Date: 01-Jan-2004
• Completion Date: 01-Jan-2004
• Mandate: M/076 - Mandate to CEN/CENELEC for standardization in the field of advanced ceramics
• Ref Project: ENV 1007-5:1998 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

Relations

• Replaced By: SIST EN 1007-5:2004 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
• Effective Date: 01-Jan-2004

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 1007-5:2000
01-december-2000
Advanced technical ceramics - Ceramic composites - Methods of test for
reinforcements - Part 5: Determination of distribution of tensile strength and of
tensile strain to failure of filaments within a multifilament tow at ambient
temperature
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements
- Part 5: Determination of distribution of tensile strength and of tensile strain to failure of
filaments within a multifilament tow at ambient temperature
Hochleistungskeramik - Keramische Verbundwerkstoffe Verfahren zur Prüfung von
Verstärkungen - Teil 5: Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung
von Fasern im Faserbündel bei Raumtemperatur
Céramiques techniques avancées - Céramiques composites - Méthodes d'essais pour
les renforts - Partie 5: Détermination des distributions des résistances en traction et des
déformations de traction a rupture des filaments dans un fil a température ambiante
Ta slovenski standard je istoveten z: ENV 1007-5:1998
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST ENV 1007-5:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1007-5:2000

---------------------- Page: 2 ----------------------

SIST ENV 1007-5:2000

---------------
...