iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60534-3-1:2001

(Main)

Industrial-process control valves -- Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

Industrial-process control valves -- Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

Specifies face-to-face (FTF) and centre-to-face (CTF) dimensions for given nominal sizes and pressure ratings of flanged, two-way, globe-type, straight pattern and angle pattern control valves.

Stellventile für die Prozeßregelung -- Teil 3-1: Abmessungen - Einbaulängen von geflanschten Durchgangsventilen und geflanschten Eckventilen

Vannes de régulation des processus industriels -- Partie 3-1: Dimensions - Dimensions face à face des vannes de régulation à soupape, à deux voies, à brides, à tête droite et dimensions face à axe des vannes de régulation à soupape, à deux voies, à brides, d'équerre

Spécifie les dimensions face à face (FAF) et face à axe (FAA) pour des dimensions nominales données et des classes de pressions données des vannes de régulation à soupape, à deux voies, à brides, droites et déquerre.

Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

General Information

Status
Withdrawn
Publication Date
31-Mar-2001
Withdrawal Date
01-Dec-2021
ICS
23.060.40 - Pressure regulators
25.040.40 - Industrial process measurement and control
Technical Committee
MOV - Measuring equipment for electromagnetic quantities
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Nov-2021
Due Date
23-Dec-2021
Completion Date
02-Dec-2021
Ref Project
EN 60534-3-1:2000 - Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

Relations

Replaced By
SIST EN IEC 60534-3-1:2019 - Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2019)
Effective Date
12-Apr-2019

Buy Standard

EN 60534-3-1:2001EN 60534-3-1:2001
PreviousNext
Standard
EN 60534-3-1:2001
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60534-3-1:2001
01-april-2001
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions
for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions
for flanged, two-way, globe-type, angle pattern control valves
Industrial-process control valves -- Part 3-1: Dimensions - Face-to-face dimensions for
flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged,
two-way, globe-type, angle pattern control valves
Stellventile für die Prozeßregelung -- Teil 3-1: Abmessungen - Einbaulängen von
geflanschten Durchgangsventilen und geflanschten Eckventilen
Vannes de régulation des processus industriels -- Partie 3-1: Dimensions - Dimensions
face à face des vannes de régulation à soupape, à deux voies, à brides, à tête droite et
dimensions face à axe des vannes de régulation à soupape, à deux voies, à brides,
d'équerre
Ta slovenski standard je istoveten z: EN 60534-3-1:2000
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 60534-3-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60534-3-1:2001

---------------------- Page: 2 ----------------------

SIST EN 60534-3-1:2001

---------------------- Page: 3 ----------------------

SIST EN 60534-3-1:2001

---------------------- Page: 4 ----------------------

SIST EN 60534-3-1:2001

---------------------- Page: 5 ----------------------

SIST EN 60534-3-1:2001

---------------------- Page: 6 ----------------------

SIST EN 60534-3-1:2001
IEC 60534-3-1
Edition 1.0 2001-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Industrial-process control valves –
Part 3-1: Dimensions – Face-to-face dimensions for flanged, two-way, globe-
type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-
type, angle pattern control valves

Vannes de régulation des processus industriels –
Partie 3-1: Dimensions – Dimensions face à face des vannes de régulation à
soupape, à deux voies, à brides, à tête droite et dimensions face à axe des
vannes de régulation à soupape, à deux voies, à brides, d’équerre

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
G
CODE PRIX
ICS 23.060; 25.040.40 ISBN 2-8318-5573-X
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60534-3-1:2001
60534-3-1 © IEC:2001 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
––––––––––––
INDUSTRIAL-PROCESS CONTROL VALVES –
Part 3-1: Dimensions – Face-to-face dimensions for flanged,
two-way, globe-type, straight pattern and centre-to-face
dimensions for flanged, two-way, globe-type,
angle pattern control valves
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60534-3-1 has been prepared by subcommittee 65B: Devices, of
IEC technical committee 65: Industrial-process measurement and control.
This bilingual version, published in 2001-01, corresponds to the English version.
The text of this standard is based on the following documents:
FDIS Report on voting
65B/392/FDIS 65B/398/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that the contents of this publication will remain unchanged
until 2006. At this date, the publication will be
• reconfirmed;
• withdrawn;
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60534-4:2022(Main)
Industrial-process control valves - Part 4: Inspection and routine testing (IEC 60534-4:2021)
EN IEC 60534-4:2022

This part of IEC 60534 specifies the requirements for the inspection and routine testing of
control valves manufactured in conformity with the other parts of IEC 60534.
This document is applicable to valves with pressure ratings not exceeding Class 2500. The
requirements for actuators apply only to pneumatic actuators.
This document does not apply to the types of control valves where radioactive service, fire
safety testing, or other hazardous service conditions are encountered. If a standard for
hazardous service conflicts with the requirements of this document, the standard for hazardous
service should take precedence.
NOTE This document can be extended to higher pressure ratings by agreement between the purchaser and the
manufacturer.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60534-3-1:2019(Main)
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2019)
EN IEC 60534-3-1:2019

This part of IEC 60534 specifies face-to-face (FTF) and centre-to-face (CTF) dimensions for
given nominal sizes and pressure ratings of flanged, two-way, globe-type, straight pattern and
angle pattern control valves. The nominal sizes included are DN 15 to DN 400 for straight
pattern control valves and DN 15 to DN 400 for angle pattern control valves.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-8-4:2016(Main)
Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2015)
EN 60534-8-4:2015

This part of IEC 60534 establishes a method to predict the noise generated in a control valve
by liquid flow and the resulting noise level measured downstream of the valve and outside of
the pipe. The noise may be generated both by normal turbulence and by liquid cavitation in
the valve. Parts of the method are based on fundamental principles of acoustics, fluid
mechanics, and mechanics. The method is validated by test data.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-2-3:2016(Main)
Industrial-process control valves -- Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:2015)
EN 60534-2-3:2016

This part of IEC 60534 is applicable to industrial-process control valves and provides the flow
capacity test procedures for determining the following variables used in the equations given in
IEC 60534-2-1:
a) flow coefficient C;
b) liquid pressure recovery factor without attached fittings FL;
c) combined liquid pressure recovery factor and piping geometry factor of a control valve
with attached fittings FLP;
d) piping geometry factor FP;
e) pressure differential ratio factors xT and xTP;
f) valve style modifier Fd;
g) Reynolds number factor FR.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-2-1:2011/AC:2015(Corrigendum)
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
EN 60534-2-1:2011/AC:2015
  • Corrigendum
    2 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61514-2:2013(Amendment)
Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2013)
EN 61514-2:2013

This part of IEC 61514 specifies design reviews and tests intended to measure and determine the static and dynamic performance, the degree of intelligence and the communication capabilities of single-acting or double-acting intelligent valve positioners. The tests may be applied to positioners which receive standard analogue electrical input signals (as specified in IEC 60381) and/or digital signals via a data communication link and have a pneumatic output. An intelligent valve positioner as defined in Clause 3 is an instrument that uses for performing its functions digital techniques for data processing, decision-making and bi-directional communication. It may be equipped with additional sensors and additional functionality supporting the main function. The performance testing of an intelligent valve positioner needs to be conducted with the positioner mounted on and connected to the actuator/valve assembly the positioner is to be used on. The specific characteristic parameters of these combinations such as size, stroke, friction (hysteresis), type of packing, spring package and supply pressure for the pneumatic part, should be carefully chosen and reported, since the performance of a positioner is greatly dependent on the used actuator. The methods of evaluation given in this standard are intended for testing laboratories to verify equipment performance specifications. The manufacturers of intelligent positioners are urged to apply this standard at an early stage of development. This standard is intended to provide guidance for designing evaluations of intelligent valve positioners by providing: - a checklist for reviewing their hardware and software design in a structured way; - test methods for measuring and qualifying their performance under various environmental and operational conditions; - methods for reporting the data obtained. When a full evaluation, in accordance with this standard, is not required or possible, the tests which are required should be performed and the results should be reported in accordance with the relevant parts of this standard. In such cases, the test report should state that it does not cover the full number of tests specified herein. Furthermore, the items omitted should be mentioned, to give the reader of the report a clear overview. The standard is also applicable for non-intelligent microprocessor-based valve positioners without means for bi-directional communication. In that case an evaluation should be reduced to a limited programme of performance testing and a short review of the construction.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-8-2:2012(Main)
Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:2011)
EN 60534-8-2:2011

This part of IEC 60534-8 includes the method for measuring the sound pressure level due to liquid flow through a control valve and the method for determining the characteristic increase of noise due to the onset of cavitation. It also defines the equipment, methods and procedures for the laboratory measurement of the airborne sound needed to determine these characteristics. Two methods are provided for testing the noise generating characteristics of control valves. The first is a uniform method of measuring the radiated noise from the valve and the associated test piping including fixed flow restrictions through which the test fluid (water) is
passing (see Note 1). The noise criteria are expressed by determining the sound pressure level of the valve under consideration. The second is a procedure for measuring the sound pressure levels within pipe systems upstream and downstream of the valve under fixed operating conditions. Since inaccuracies due to the pipe transmission are eliminated, this method shall be preferred for evaluation of the acoustical characteristic of valves. The noise characteristics to be determined are useful:
a) to determine acoustical characteristics of valves and valve assemblies and the characteristic pressure ratio factor xFz of a control valve;
b) to predict valve noise for given process conditions;
c) to compare the performance of different valves and various measuring results;
d) to plan measures for increasing service life and noise abatement;
e) to determine possible adverse effects on ultra-sonic flow meter measurements;
f) to enable proper sizing of sound absorbers.
NOTE 1 Test fluids other than water or valves without downstream piping are not within the scope of this section of IEC 60534-8.
NOTE 2 The factor xFz is used in a noise prediction method which is covered in IEC 60534-8-4.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-2-1:2011(Main)
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011)
EN 60534-2-1:2011

This part of IEC 60534 includes equations for predicting the flow of compressible and incompressible fluids through control valves. The equations for incompressible flow are based on standard hydrodynamic equations for Newtonian incompressible fluids. They are not intended for use when non-Newtonian fluids, fluid mixtures, slurries or liquid-solid conveyance systems are encountered. The equations for incompressible flow may be used with caution for non-vaporizing multi-component liquid mixtures. Refer to Clause 6 for additional information.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-8-3:2011(Main)
Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method (IEC 60534-8-3:2010)
EN 60534-8-3:2011

This Standard establishes a theoretical method to predict the external sound-pressure level generated in a control valve and within adjacent pipe expanders by the flow of compressible fluids. This method considers only single-phase dry gases and vapours and is based on the perfect gas laws. It is assumed that the downstream piping is straight for a length of at least 2 m from the point where the noise measurement is made. The method is applicable to the following single-stage valves: - globe (straight pattern and angle pattern), - butterfly, - rotary plug (eccentric, spherical), - ball, and - valves with cage trims. Specifically excluded are the full bore ball valves where the product FpC exceeds 50 % of the rated flow coefficient. This third edition cancels and replaces the second edition published in 2000. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: - predicting noise as a function of frequency; - using laboratory data to determine the acoustical efficiency factor.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60534-7:2011(Main)
Industrial-process control valves - Part 7: Control valve data sheet (IEC 60534-7:2010)
EN 60534-7:2010

This part of the IEC 60534 series provides a list of requirements that are normally necessary for the procurement of the majority of control valves for process systems. No attempt is made to include all possible requirements for any conceivable process. The list is arranged in a format designed to assist the specification writer with a standardized presentation of data and also to be a basis for use with data processing facilities. A detailed set of instructions is included in order to ensure that the abbreviated terms are fully understood and that consistent data entries are always made.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day