Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 5: Security; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma specification

To define PICS proforma i.a.w. ETR 212 for security functions in TETRA V+D, PDO and DMO.

Prizemni snopovni radio (TETRA) – Specifikacija za preskušanje skladnosti – 5. del: Varnost – 1. poddel: Izjava o skladnosti izvedbe protokola (PICS) – Proforma specifikacija

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Mandate

Buy Standard

Standard
ETS 300 394-5-1 E1:2003
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 394-5-1 E1:2003
01-december-2003
Prizemni snopovni radio (TETRA) – Specifikacija za preskušanje skladnosti – 5.
del: Varnost – 1. poddel: Izjava o skladnosti izvedbe protokola (PICS) – Proforma
specifikacija
Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 5: Security;
Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
specification
Ta slovenski standard je istoveten z: ETS 300 394-5-1 Edition 1
ICS:
33.070.10 Prizemni snopovni radio Terrestrial Trunked Radio
(TETRA) (TETRA)
SIST ETS 300 394-5-1 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 394-5-1 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 394-5-1 E1:2003
EUROPEAN ETS 300 394-5-1
TELECOMMUNICATION July 1999
STANDARD
Source: TETRA Reference: DE/TETRA-06025
ICS: 33.020
Key words: PICS, TETRA, security, V+D, voice, data
Terrestrial Trunked Radio (TETRA);
Conformance testing specification;
Part 5: Security;
Sub-part 1: Protocol Implementation Conformance
Statement (PICS) proforma specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: secretariat@etsi.fr - http://www.etsi.org
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1999. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 2
ETS 300 394-5-1: July 1999
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Standards Making Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 3
ETS 300 394-5-1: July 1999
Contents
Foreword . 5
1 Scope. 7
2 Normative references . 7
3 Definitions and abbreviations. 8
3.1 Definitions. 8
3.2 Abbreviations. 8
4 Conformance to this PICS proforma specification. 8
Annex A (normative): Protocol ICS proforma for TETRA Security . 9
A.1 Guidance for completing the PICS proforma. 9
A.1.1 Purposes and structure . 9
A.1.2 Abbreviations and conventions. 9
A.1.3 Instructions for completing the PICS proforma . 11
A.2 Identification of the implementation . 11
A.2.1 Date of the statement . 11
A.2.2 Implementation Under Test (IUT) identification. 11
A.2.3 System Under Test (SUT) identification. 12
A.2.4 Product supplier. 12
A.2.5 Client . 12
A.2.6 PICS contact person. 13
A.2.7 Authentication algorithm identification. 13
A.3 Identification of the protocol. 14
Annex B (normative): Protocol ICS tables proforma for TETRA V+D Security. 15
B.1 Global statement of conformance. 15
B.2 Structure of V+D ICS tables. 15
B.3 Major capabilities . 16
B.4 Authentication . 17
B.4.1 Authentication algorithms .18
B.4.2 Authentication cipher keys.18
B.4.3 Authentication PDUs . 18
B.4.4 Authentication PDU elements. 19
B.4.5 Registration PDU extended elements . 21
B.5 OTAR. 21
B.5.1 OTAR algorithms. 23
B.5.2 OTAR cipher keys . 23
B.5.3 OTAR PDUs . 24
B.5.4 OTAR PDU elements . 25
B.5.5 Registration PDU extended elements . 27
B.6 Enable/disable . 27
B.6.1 Enable Disable PDUs.28
B.6.2 Secure Enable Disable PDU elements. 29

---------------------- Page: 5 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 4
ETS 300 394-5-1: July 1999
B.7 AI encryption.30
B.7.1 AI encryption algorithms and keys.30
B.7.2 AI encryption algorithms (KSG) .31
B.8 Key change protocol.32
B.9 End-to-end encryption .33
B.10 Encrypted short identities .34
B.10.1 ESI algorithms.35
B.10.2 ESI keys.35
B.11 TEI delivery.36
B.11.1 TEI delivery PDU .36
B.11.2 TEI delivery PDU elements.36
B.11.3 Registration PDU extended elements.36
B.12 PDU support.37
Annex C (normative): Protocol ICS tables proforma for TETRA DMO Security.38
C.1 Global statement of conformance .38
C.2 OTAR in DMO .38
C.2.1 DMO OTAR algorithms.39
C.2.2 OTAR DMO PDUs .40
C.2.3 OTAR DMO PDU elements .40
C.2.4 SDS Element encoding for carriage of OTAR PDUs.41
C.3 Secure enable/disable in DMO.42
C.3.1 DMO Secure enable/disable algorithms .43
C.3.2 DMO secure enable/disable PDUs .44
C.3.3 ENDIS PDU elements.44
C.3.4 SDS Element encoding for carriage of ENDIS PDUs.45
C.4 DMO AI encryption .47
C.4.1 DMO AI encryption algorithms.48
C.5 DMO End-to-end encryption.48
History.51

---------------------- Page: 6 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 5
ETS 300 394-5-1: July 1999
Foreword
This European Telecommunication Standard (ETS) has been produced by the Terrestrial Trunked Radio
(TETRA) Project of the European Telecommunications Standards Institute (ETSI).
Every ETS prepared by ETSI is a voluntary standard. This ETS contains text concerning conformance
testing of the equipment to which it relates. This text should be considered only as guidance and does not
make this ETS mandatory.
This ETS is a multi-part standard and will consist of the following parts:
Part 1: "Radio";
Part 2: "Protocol testing specification for Voice plus Data (V+D)";
Part 4: "Protocol testing specification for Direct Mode Operation (DMO)";
Part 5: "Security".
Transposition dates
Date of adoption of this ETS: 25 June 1999
Date of latest announcement of this ETS (doa): 30 September 1999
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 March 2000
Date of withdrawal of any conflicting National Standard (dow): 31 March 2000

---------------------- Page: 7 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 6
ETS 300 394-5-1: July 1999
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 7
ETS 300 394-5-1: July 1999
1 Scope
This European Telecommunication Standard (ETS) provides the Protocol Implementation Conformance
Statement (PICS) proforma in compliance with the relevant requirements, and in accordance with the
relevant guidance given in ISO/IEC 9646-7 [8], ETS 300 406 [3], and in ETR 212 [9] for the following
standards:
TETRA; Voice plus Data (V+D); Part 7: Security defined in ETS 300 392-7 [1];
TETRA; Direct Mode; Part 6: Security defined in ETS 300 396-6 [2].
The PICS draft has acted as a fair and independent review of the above standards. The above standards
may therefore be subject to modification or extension as a result of this PICS proforma.
The role of the PICS is to enable selection of test cases from ETS 300 394-5-2 for the MS. In the case of
the SwMI the PICS is a tool to guide procurement of TETRA systems. This ETS acts as a complement to
the PICS for TETRA V+D, ETS 300 392-14.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 392-7: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D);
Part 7: Security".
[2] ETS 300 396-6: "Terrestrial Trunked Radio (TETRA); Direct Mode Operation
(DMO); Part 6: Security".
[3] ETS 300 406 : "Methods for testing and Specification (MTS); Protocol and
profile conformance testing specifications; Standardization methodology".
[4] ETS 300 392-2: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D);
Part 2: Air Interface (AI)".
[5] ETS 300 396-3: "Terrestrial Trunked Radio (TETRA); Technical requirements
for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station
(MS-MS) Air Interface (AI) protocol".
[6] ETS 300 393-7: "Terrestrial Trunked Radio (TETRA); Packet Data Optimized
(PDO); Part 7: Security".
[7] ISO/IEC 9646-1 (1994): "Information technology - Open systems interconnection
- Conformance testing methodology and framework - Part 1: General concepts".
[8] ISO/IEC 9646-7 (1995): "Information technology - Open systems interconnection
- Conformance testing methodology and framework - Part 7: Implementation
Conformance Statements".
[9] ETR 212: "Methods for testing and Specification (MTS); Implementation
Conformance Statement (ICS) proforma style guide".
[10] ISO 8208 (1995): "Information technology - Data communications - X.25 Packet
Layer Protocol for Data Terminal Equipment".
[11] ISO/IEC 8348 (1996): "Information technology - Open Systems Interconnection -
Network Service Definition".

---------------------- Page: 9 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 8
ETS 300 394-5-1: July 1999
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following definitions apply:
- Terms defined in ETS 300 392-7 [1];
- Terms defined in ETS 300 396-6 [2];
- Terms defined in ISO/IEC 9646-1 [7] and in ISO/IEC 9646-7 [8].
In particular, the following terms defined in ISO/IEC 9646-1 [7] apply:
Implementation Conformance Statement (ICS): statement made by the supplier of an implementation
or system claimed to conform to a given specification, stating which capabilities have been implemented.
The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.
ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or
system becomes an ICS
Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol
specification
3.2 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
BS Base Station
CC Call Control sub entity within CMCE
CMCE Circuit Mode Control Entity
CONP Connection Oriented Network Protocol
DTMF Dual Tone Multi Frequency
ETS European Telecommunication Standard
ICS Implementation Conformance Statement
ITSI Individual TETRA Subscriber Identity
IUT Implementation Under Test
LLC Logical Link Control
LLME Lower Layer Management Entity
MAC Medium Access Control
MCC Mobile Country Code
MM Mobility Management
MNC Mobile Network Code
MS Mobile Station
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
RPDI Radio Packet Data Infrastructure
SCLNP Specific Connectionless Network Protocol
SAP Service Access Point
SCS System Conformance Statement
SDU Service Data Unit
SP Service Primitive
SS Supplementary Service sub entity within CMCE
SUT System Under Test
SwMI Switching and Management Infrastructure
4 Conformance to this PICS proforma specification
If it claims to conform to this ETS the actual PICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming
and ordering of the proforma items.
A PICS which conforms to this ETS shall be a conforming PICS proforma completed in accordance with
the guidance for completion given in clause A.1.

---------------------- Page: 10 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 9
ETS 300 394-5-1: July 1999
Annex A (normative): Protocol ICS proforma for TETRA Security
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing the PICS proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of
the requirements defined in ETS 300 392-7, or ETS 300 396-6, may provide information about the
implementation in a standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information with some of
these subclauses also included in a set of separate annexes covering V+D and DMO specific aspects:
- Guidance for completing the PICS proforma (annex A)
- Identification of the implementation;
- Identification of the protocol;
- V+D Specific Aspects (annex B)
- Global statement of conformance;
- Authentication;
- Over The Air Rekeying (OTAR);
- Enable/disable;
- Air Interface encryption;
- Key change protocol;
- End-to-end encryption.
- Encrypted short identities;
- TEI delivery;
- PDU support.
- DMO specific aspects (annex C)
- OTAR in DMO;
- Enable/Disable in DMO (ENDIS);
- Air Interface encryption;
- End-to-end encryption.
A.1.2 Abbreviations and conventions
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with
the guide-lines presented in ISO/IEC 9646-7.
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. elements, timers, etc.). It
implicitly means "is supported by the implementation?".
Status column
The following notations, defined in ISO/IEC 9646-7, are used for the status column:
m mandatory - the capability is required to be supported.
o optional - the capability may be supported or not.
n/a not applicable - in the given context, it is impossible to use the capability.

---------------------- Page: 11 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 10
ETS 300 394-5-1: July 1999
x prohibited (excluded) - there is a requirement not to use this capability in the
given context.
oi qualified optional - for mutually exclusive or selectable options from a set. "i" is
an integer which identifies a unique group of related optional items and the logic
of their selection which is defined immediately following the table.
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on
the support of other optional or conditional items. "i" is an integer identifying a
unique conditional status expression which is defined immediately following the
table.
Reference column
The reference column gives reference to ETS 300 392-7, except where explicitly stated otherwise. In
providing the reference the format [x] a.b.c.d is used where [x] is the number of the referenced document
from clause 2, and a.b.c.d refers to the specific clause or subclause of the reference document.
Support column
The support column shall be filled in by the supplier of the implementation. The following common
notations, defined in ISO/IEC 9646-7, are used for the support column:
Y or y supported by the implementation
N or n not supported by the implementation
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation
of a conditional status)
It is also possible to provide a comment to an answer in the space provided at the bottom of the table.
NOTE: As stated in ISO/IEC 9646-7, support for a received PDU requires the ability to
encode/decode all mandatory elements of that PDU. Supporting a PDU while having
no ability to encode/decode a mandatory element is non-conformant. Support for an
element of a PDU means that the semantics of that element are supported. It does not
mean that the element shall always be present in the PDU.
Values allowed column
The values allowed column contains the type, the list, the range, or the length of values allowed. The
following notations are used:
- range of values: .
EXAMPLE: 5 . 20
- list of values: , , .,
EXAMPLE: 2, 4, 6, 8, 9
EXAMPLE: '1101'B, '1011'B, '1111'B
EXAMPLE: '0A'H, '34'H, '2F'H
- list of named values: (), (), ., ()
EXAMPLE: reject(1), accept(2)
- length: size ( . )
EXAMPLE: size (1 . 8)
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the
values or the ranges of values supported by the implementation shall be indicated.

---------------------- Page: 12 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 11
ETS 300 394-5-1: July 1999
References to items
For each possible item answer (answer in the support column) within the PICS proforma exists a unique
reference, used, for example, in the conditional expressions. It is defined as the table identifier, followed
by a solidus character "/", followed by the item number in the table. If there is more than one support
column in a table, the columns are discriminated by letters (a, b, etc.), respectively.
EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table A.5.
EXAMPLE 2: A.6/3b is the reference to the second answer (i.e. in the second support column)
of item 3 in table A.6.
Prerequisite line
A prerequisite line takes the form: Prerequisite: .
A prerequisite line in the beginning of a clause or table indicates that the whole clause or the whole table
is not required to be completed if the predicate is FALSE.
NOTE: In this PICS proforma, all the tables have a prerequisite independently on the status of
the predicate referred to being mandatory or optional. This is done for readability
reasons.
A.1.3 Instructions for completing the PICS proforma
The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In
particular, an explicit answer shall be entered, in each of the support or supported column boxes provided,
using the notation described in subclause A.1.2.
If necessary, the supplier may provide additional comments in space at the bottom of the tables, or
separately on sheets of paper.
More detailed instructions are given at the beginning of the different subclauses of the PICS proforma.
A.2 Identification of the implementation
NOTE: This section is to be completed for each submission of a PICS for V+D and DMO.
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
A.2.1 Date of the statement
........................................................................................................................................................................
A.2.2 Implementation Under Test (IUT) identification
IUT name:
........................................................................................................................................................................
........................................................................................................................................................................
IUT version:
........................................................................................................................................................................

---------------------- Page: 13 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 12
ETS 300 394-5-1: July 1999
A.2.3 System Under Test (SUT) identification
SUT name:
.........................................................................................................................................................................
.........................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
Operating system:
.........................................................................................................................................................................
A.2.4 Product supplier
Name:
.........................................................................................................................................................................
Address:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................
E-mail address:
.........................................................................................................................................................................
Additional information:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
A.2.5 Client
(If different from product supplier)
Name:
.........................................................................................................................................................................

---------------------- Page: 14 ----------------------

SIST ETS 300 394-5-1 E1:2003
Page 13
ETS 300 394-5-1: July 1999
Address:
..............................................................................................................
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.