SIST EN ISO 21606:2008/oprA1:2020

Dentistry - Elastomeric auxiliaries for use in orthodontics - Amendment 1 (ISO 21606:2007/DAM 1:2020)

Zahnheilkunde - Elastomere Elemente für die Kieferorthopädie - ÄNDERUNG 1 (ISO 21606:2007/DAM 1:2020)

Art dentaire - Auxiliaires élastomères utilisés en orthodontie - Amendement 1 (ISO 21606:2007/DAM 1:2020)

Zobozdravstvo - Elastomerni pripomočki za uporabo v ortodontiji - Dopolnilo A1 (ISO 21606:2007/DAM 1:2020)

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Jul-2020
• ICS: 11.060.10 - Dental materials
• Technical Committee: VAZ - Healthcare
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 12-May-2021
• Due Date: 17-May-2021
• Completion Date: 12-May-2021
• Ref Project: EN ISO 21606:2007/prA1 - Dentistry - Elastomeric auxiliaries for use in orthodontics - Amendment 1 (ISO 21606:2007/DAM 1:2020)

Relations

• Amends: SIST EN ISO 21606:2008 - Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007)
• Effective Date: 01-Jul-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21606:2008/oprA1:2020
01-julij-2020
Zobozdravstvo - Elastomerni pripomočki za uporabo v ortodontiji - Dopolnilo A1
(ISO 21606:2007/DAM 1:2020)
Dentistry - Elastomeric auxiliaries for use in orthodontics - Amendment 1 (ISO
21606:2007/DAM 1:2020)
Zahnheilkunde - Elastomere Elemente für die Kieferorthopädie - ÄNDERUNG 1 (ISO
21606:2007/DAM 1:2020)
Art dentaire - Auxiliaires élastomères utilisés en orthodontie - Amendement 1 (ISO
21606:2007/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 21606:2007/prA1
ICS:
11.060.10 Zobotehnični materiali Dental materials
SIST EN ISO 21606:2008/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21606:2008/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 21606:2008/oprA1:2020
DRAFT AMENDMENT
ISO 21606:2007/DAM 1
ISO/TC 106/SC 1 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2020-04-29 2020-07-22
Dentistry — Elastomeric auxiliaries for use in orthodontics
AMENDMENT 1
Art dentaire — Auxiliaires élastomères utilisés en orthodontie
AMENDEMENT 1
ICS: 11.060.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 21606:2007/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
SIST EN ISO 21606:2008/oprA1:2020
ISO 21606:2007/DAM 1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
SIST EN ISO 21606:2008/oprA1:2020
ISO 21606:2007/DAM 1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www
...