oSIST prEN ISO 1183-1:2024

Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024)

This document specifies three methods for the determination of the density of non-cellular plastics in the form of void-free moulded or extruded objects, as well as powders, flakes and granules.
— Method A: Immersion method, for solid plastics (except for powders) in void-free form.
— Method B: Liquid pycnometer method, for particles, powders, flakes, granules or small pieces of finished parts.
— Method C: Titration method, for plastics in any void-free form.
NOTE Density is frequently used to follow variations in physical structure or composition of plastic materials. Density can also be useful in assessing the uniformity of samples or specimens. Often, the density of plastic materials depend upon the choice of specimen preparation method. When this is the case, precise details of the specimen preparation method are intended to be included in the appropriate material specification. This note is applicable to all three methods.

Kunststoffe - Verfahren zur Bestimmung der Dichte von nicht verschäumten Kunststoffen - Teil 1: Eintauchverfahren, Verfahren mit Flüssigkeitspyknometer und Titrationsverfahren (ISO/DIS 1183-1:2024)

Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage (ISO/DIS 1183-1:2024)

Le présent document spécifie trois méthodes de détermination de la masse volumique des plastiques non alvéolaires sous forme d'objets moulés ou extrudés exempts de cavités fermées, ainsi que de poudres, de paillettes ou de grains.
— Méthode A: méthode par immersion, pour les plastiques solides exempts de cavités fermées (excepté les poudres).
— Méthode B: méthode du pycnomètre en milieu liquide, pour les particules telles que les poudres, les paillettes, les grains ou les parties finies réduites en petits morceaux.
— Méthode C: méthode par titrage, pour les plastiques exempts de cavités fermées.
NOTE La masse volumique est fréquemment utilisée pour suivre les variations de la structure physique ou de la composition des matériaux plastiques. La masse volumique peut également se révéler utile pour évaluer l'uniformité des échantillons ou des éprouvettes. La masse volumique des matériaux plastiques dépend souvent du choix de la méthode de préparation de l'échantillon. Lorsque cela est applicable, des détails précis de la méthode de préparation de l'échantillon doivent être donnés dans les spécifications appropriées relatives à la matière. Cette note s'applique à chacune des trois méthodes.

Polimerni materiali - Metode za določanje gostote nepenjenih polimernih materialov - 1. del: Metoda s potapljanjem, metoda s tekočinskim piknometrom in titracijska metoda (ISO/DIS 1183-1:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 21-Apr-2024
• ICS: 83.080.01 - Plastics in general
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 07-Feb-2024
• Due Date: 26-Jun-2024
• Ref Project: prEN ISO 1183-1 - Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024)

Relations

• Revised: SIST EN ISO 1183-1:2019 - Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 1183-1:2024
01-april-2024
Polimerni materiali - Metode za določanje gostote nepenjenih polimernih
materialov - 1. del: Metoda s potapljanjem, metoda s tekočinskim piknometrom in
titracijska metoda (ISO/DIS 1183-1:2024)
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion
method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024)
Kunststoffe - Verfahren zur Bestimmung der Dichte von nicht verschäumten Kunststoffen
- Teil 1: Eintauchverfahren, Verfahren mit Flüssigkeitspyknometer und
Titrationsverfahren (ISO/DIS 1183-1:2024)
Plastiques - Méthodes de détermination de la masse volumique des plastiques non
alvéolaires - Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide
et méthode par titrage (ISO/DIS 1183-1:2024)
Ta slovenski standard je istoveten z: prEN ISO 1183-1
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 1183-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1183-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 1183-1:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1183-1
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
2024-01-30 2024-04-23
Plastics — Methods for determining the density of non-
cellular plastics —
Part 1:
Immersion method, liquid pycnometer method and
titration method
Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires —
Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1183-1:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 1183-1:2024
ISO/DIS 1183-1:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1183-1
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:

Plastics — Methods for determining the density of non-
cellular plastics —
Part 1:
Immersion method, liquid pycnometer method and
titration method
Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires —
Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 1183-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 1183-1:2024
ISO/DIS 1183-1:2023(E)
Contents Page
Foreword .
...