SIST EN 15819:2011

Polymer modified bituminous thick coatings - Reduction of the thickness of the layer when fully dried

This European Standard specifies a procedure for determining the reduction in the thickness of polymer modified bituminous thick coatings due to drying for waterproofing.

Kunststoffmodifizierte Bitumendickbeschichtungen - Verringerung der Schichtdicke nach dem Austrocknen

Diese Europäische Norm legt ein Verfahren zur Bestimmung der durch die Trocknung verursachten Verringerung der Schichtdicke von kunststoffmodifizierten Bitumendickbeschichtungen zur Bauwerksabdichtung fest.

Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Réduction de l'épaisseur de la couche lorsqu'elle est totalement sèche

La présente Norme européenne spécifie une méthode permettant de déterminer la réduction d’épaisseur liée au séchage des revêtements bitumineux épais modifiés aux polymères pour imperméabilisation.

Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Zmanjšanje debeline plasti po sušenju

Ta evropski standard opredeljuje postopek za določanje zmanjšanje debeline bitumenskih debeloslojnih prevlek za tesnjenje, modificiranih s polimeri, po sušenju, da se zagotovi hidroizolacija.

General Information

• Status: Published
• Publication Date: 10-May-2011
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: VLA - Water proofing
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Apr-2011
• Due Date: 18-Jun-2011
• Completion Date: 11-May-2011
• Ref Project: EN 15819:2011 - Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Zmanjšanje debeline plasti po sušenjuKunststoffmodifizierte Bitumendickbeschichtungen - Verringerung der Schichtdicke nach dem AustrocknenPolymer modified bituminous thick coatings - Reduction of the thickness of the layer when fully dried91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15819:2011SIST EN 15819:2011en,fr,de01-junij-2011SIST EN 15819:2011SLOVENSKI
STANDARD



SIST EN 15819:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15819
March 2011 ICS 91.100.50 English Version
Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried
Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Réduction de l'épaisseur de la couche lorsqu'elle est totalement sèche
Kunststoffmodifizierte Bitumendickbeschichtungen zur Bauwerksabdichtung - Verringerung der Schichtdicke nach dem Austrocknen This European Standard was approved by CEN on 13 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15819:2011: ESIST EN 15819:2011



EN 15819:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .45 Apparatus .46 Test specimens .47 Preparation .58 Procedure .58.1 Test conditions .58.2 Procedure .59 Expression of results and precision .59.1 Expression of results .59.2 Precision .510 Test report .6 SIST EN 15819:2011



EN 15819:2011 (E) 3 Foreword This document (EN 15819:2011) has been prepared by Technical Committee CEN/TC 361 “Project Committee — Polymer modified bituminous thick coatings for waterproofing — Definitions/requirements and test methods”, the secretariat of which is held by DIN. This European Standard shall be given the s
...