SIST EN 301 810 V1.2.1:2005

• Abstract:

  Endorsement of the last ISO version.

• Status: Published
• Publication Date: 28-Feb-2005
• ICS: 33.040.35 - Telephone networks
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2005
• Due Date: 01-Mar-2005
• Completion Date: 01-Mar-2005
• Ref Project: ETSI EN 301 810 V1.2.1 (2004-01) - Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Private User Mobility (PUM); Call handling Additional Network Feature (ANF) [ISO/IEC 17878 (2003), modified]

SIST EN 301 810 V1.2.1:2005 is the SIST adoption of ETSI EN 301 810 V1.2.1 for Private Integrated Services Network (PISN) inter-exchange signalling. It specifies the signalling protocol at the Q reference point for Private User Mobility (PUM) call handling Additional Network Feature (ANF), including ANF-PUMI and ANF-PUMO, for implementers of PISN and QSIG systems. The document endorses ISO/IEC 17878 (2003) with ETSI modifications.

What does SIST EN 301 810 V1.2.1:2005 specify?

SIST EN 301 810 V1.2.1:2005 specifies how the ISO/IEC 17878 protocol is endorsed and adapted for ETSI use. In practice, it is the PISN signalling standard for PUM call handling at the Q reference point, so it matters to anyone implementing or checking interoperability of PISN switching and terminal equipment.

The document is organized as a short endorsement notice plus clause 3 on references and a replacement table that maps ISO/IEC references to ETSI equivalents. The foreword also places the standard in the PISN series and identifies its relation to PSS1, informally known as QSIG.

What are the key requirements of SIST EN 301 810 V1.2.1:2005?

SIST EN 301 810 V1.2.1:2005 applies the elements of ISO/IEC 17878 (2003) with ETSI modifications. For users, that means the ISO text is not taken as-is - the ETSI replacements in this document govern the final version to be implemented.

Clause 3 sets the rule for references. It distinguishes specific references, where later revisions do not apply, from non-specific references, where the latest version applies. This matters when you build, test, or audit a system, because the cited edition controls what you must follow.

Clause 3 also adds a set of normative companion standards. These cover the surrounding PISN framework needed to interpret the protocol, including addressing, circuit-mode basic services, bearer services, reference configuration, and several supplementary services and ANFs. In practice, this tells implementers which other ETSI documents must be available when they design or validate the PUM call handling behaviour.

The same clause replaces a long list of ISO/IEC references throughout ISO/IEC 17878 with ETSI documents. That cross-reference table is important because it shows which ETSI standard stands behind each original ISO/IEC citation.

The foreword states that the protocol is for the Q reference point and that it forms part of PSS1, informally known as QSIG. For engineers, that fixes the interface context and avoids treating the protocol as a general-purpose telephony procedure outside the PISN/QSIG framework.

The document also replaces the phrase “this International Standard” with “the present document”. This is editorial, but it confirms that the ETSI/ETSI-adopted text is the one to cite in conformance documents and procurement specifications.

What terms does SIST EN 301 810 V1.2.1:2005 define?

• Private Integrated Services Network (PISN) - A private network domain for integrated services signalling and telephony features.
• Private User Mobility (PUM) - The feature area covered by the standard for user mobility within a PISN.
• Additional Network Feature (ANF) - An extra network function beyond the basic call service.
• ANF-PUMI - One of the PUM call handling ANFs specified by this protocol.
• ANF-PUMO - The other PUM call handling ANF specified by this protocol.
• PSS1 - The signalling protocol family of which this document forms part.
• QSIG - The informal name used for PSS1.
• Q reference point - The network interface point where the signalling protocol applies.

Who uses SIST EN 301 810 V1.2.1:2005?

SIST EN 301 810 V1.2.1:2005 is used by telecommunications engineers, PBX and PISN equipment vendors, interoperability test laboratories, and standards specialists working on QSIG-based private networks. It is also relevant to buyers and quality managers who need to confirm that a product supports the correct PUM call handling signalling.

What changed in SIST EN 301 810 V1.2.1:2005 from the previous edition?

SIST EN 301 810 V1.2.1:2005 is the later V1.2.1 issue listed in the document history, following an earlier V1.1.1 publication. The history also shows the V1.2.1 publication sequence and the 2003-2004 ETSI/endorsement timeline used for this version.

Which standards are used with SIST EN 301 810 V1.2.1:2005?

Clause 3 names the companion standards that support the protocol, including ETSI EN 300 189 for addressing, EN 300 172 for circuit-mode basic services, EN 300 171 for circuit-mode 64 kbit/s bearer services, and ETS 300 475-1 for PTN reference configuration.

It also references EN 300 239 for the generic functional protocol for supplementary services, EN 300 238, EN 300 257, EN 300 259, EN 300 362, EN 300 364, EN 300 426, EN 301 264, EN 301 265, EN 301 048, EN 301 827, EN 301 255, EN 301 820, and EN 301 656 for related PISN supplementary services and ANFs.

For PUM specifically, the related companion parts are EN 301 822 for PUM registration service, EN 301 821 for PUM registration signalling, and EN 301 657 for PUM call handling ANFs.

What does the SIST EN 301 810 V1.2.1:2005 document contain?

The document contains the front matter, the endorsement notice, clause 3 with its reference rules and added normative references, and a table that replaces ISO/IEC citations with ETSI document numbers. It also contains the wording changes that substitute “the present document” for “this International Standard”.

For implementers, the most useful content is the cross-reference table. It tells you which ETSI standards must be used alongside the ISO/IEC base text when designing, integrating, or testing PUM call handling in a PISN.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zasebno omrežje z integriranimi storitvami (PISN) - Medcentralni signalizacijski protokol - Mobilnost zasebnega uporabnika (PUM) - Dodatne omrežne lastnosti (ANFs): ravnanje s klicem [ISO/IEC 17878 (2003), spremenjen]Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Private User Mobility (PUM); Call handling Additional Network Feature (ANF) [ISO/IEC 17878 (2003), modified]33.040.35Telefonska omrežjaTelephone networksICS:Ta slovenski standard je istoveten z:EN 301 810 Version 1.2.1SIST EN 301 810 V1.2.1:2005en01-marec-2005SIST EN 301 810 V1.2.1:2005SLOVENSKI
STANDARD
ETSI ETSI EN 301 810 V1.2.1 (2004-01) 2
Reference REN/ECMA-00258 Keywords ANF, endorsement, PISN, PUM, QSIG, stage 3 ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 810 V1.2.1:2005

ETSI ETSI EN 301 810 V1.2.1 (2004-01) 3
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the signalling protocol for use at the Q reference point for Private User Mobility call handling additional network features ANF-PUMI and ANF-PUMO. The protocol defined in the present document forms part of the PSS1 protocol (informally known as QSIG). The present document endorses an International Standard, ISO/IEC 17878.
National transposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 September 2004 Date of withdrawal of any conflicting National Standard (dow): 30 September 2004
Endorsement notice The elements of International Standard ISO/IEC 17878 (2003) apply, with the following modifications. SIST EN 301 810 V1.2.1:2005

ETSI ETSI EN 301 810 V1.2.1 (2004-01) 4
Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions
...