SIST EN ISO 14880-3:2025
(Main)Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2024)
Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2024)
ISO 14880-3:2006 specifies methods for testing optical properties, other than wavefront aberrations, of microlenses in microlens arrays. It is applicable to microlens arrays with very small lenses formed on one or more surfaces of a common substrate and to graded index microlenses.
Optik und Photonik - Mikrolinsenarrays - Teil 3: Prüfverfahren für optische Eigenschaften außer Wellenfrontaberrationen (ISO 14880-3:2024)
Dieses Dokument legt Prüfverfahren für die Messung optischer Eigenschaften von Mikrolinsen in Mikrolinsenarrays fest, mit Ausnahme von Wellenfrontaberrationen [1]. Die Norm gilt für Mikrolinsenarrays mit sehr kleinen Linsen, die auf einer oder mehreren Oberflächen eines gemeinsamen Substrats angeordnet sind, und für Gradientenindex-Mikrolinsen.
Optique et photonique - Réseaux de microlentilles - Partie 3: Méthodes d'essai pour les propriétés optiques autres que les aberrations du front d'onde (ISO 14880-3:2024)
L'ISO 14880-3:2006 spécifie les méthodes d'essai des propriétés optiques, autres que les aberrations du front d'onde, des microlentilles dans les réseaux de microlentilles. Elle s'applique aux réseaux de microlentilles avec de très petites lentilles qui composent une ou plusieurs surfaces d'un substrat commun et aux microlentilles à gradient d'indice.
Optika in fotonska tehnologija - Vrste mikroleč - 3. del: Preskusne metode za optične lastnosti, razen odstopanja valovne fronte (ISO 14880-3:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Nadomešča:
SIST EN ISO 14880-3:2006
Optika in fotonska tehnologija - Vrste mikroleč - 3. del: Preskusne metode za
optične lastnosti, razen odstopanja valovne fronte (ISO 14880-3:2024)
Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties
other than wavefront aberrations (ISO 14880-3:2024)
Optik und Photonik - Mikrolinsenarrays - Teil 3: Prüfverfahren für optische Eigenschaften
außer Wellenfrontaberrationen (ISO 14880-3:2024)
Optique et photonique - Réseaux de microlentilles - Partie 3: Méthodes d'essai pour les
propriétés optiques autres que les aberrations du front d'onde (ISO 14880-3:2024)
Ta slovenski standard je istoveten z: EN ISO 14880-3:2024
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 14880-3
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 31.260 Supersedes EN ISO 14880-3:2006
English Version
Optics and photonics - Microlens arrays - Part 3: Test
methods for optical properties other than wavefront
aberrations (ISO 14880-3:2024)
Optique et photonique - Réseaux de microlentilles - Optik und Photonik - Mikrolinsenarrays - Teil 3:
Partie 3: Méthodes d'essai pour les propriétés optiques Prüfverfahren für optische Eigenschaften außer
autres que les aberrations du front d'onde (ISO 14880- Wellenfrontaberrationen (ISO 14880-3:2024)
3:2024)
This European Standard was approved by CEN on 5 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14880-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 14880-3:2024) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14880-3:2006.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 14880-3:2024 has been approved by CEN as EN ISO 14880-3:2024 without any
modification.
International
Standard
ISO 14880-3
Second edition
Optics and photonics — Microlens
2024-11
arrays —
Part 3:
Test methods for optical properties
other than wavefront aberrations
Optique et photonique — Réseaux de microlentilles —
Partie 3: Méthodes d'essai pour les propriétés optiques autres que
les aberrations du front d'onde
Reference number
ISO 14880-3:2024(en) © ISO 2024
ISO 14880-3:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 14880-3:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Substrate test . 1
5 Microscope test method . 1
5.1 Principle .1
5.2 Measurement arrangement and test equipment .2
5.2.1 General .2
5.2.2 Test system .3
6 Procedure . 4
6.1 General .4
6.2 Measurement of effective back or front focal length .4
6.3 Measurement of chromatic aberration .4
6.4 Measurement of the uniformity of the focal spot positions .5
7 Results and uncertainties . 5
8 Coupling efficiency, imaging quality. 6
9 Test report . 6
Annex A (informative) Measurements with wavefront measuring systems . 8
Annex B (informative) Confocal measurement of effective back or front focal length of lens
array .10
Annex C (informative) Coupling efficiency, imaging quality .12
Annex D (informative) Measurement of the uniformity of the focal spot positions of a microlens
array .13
Bibliography . 14
iii
ISO 14880-3:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 172, Optics and Photonics, Subcommittee SC 9,
Laser and electro-optical systems, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 123, Lasers and photonics, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 14880-3:2006), which has been technically
revised.
The main changes are as follows:
— Introduction revised;
— Reference documents and numbering updated.
A list of all parts in the ISO 14880 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.