kSIST FprEN ISO 22007-1:2024

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISOF/DIS 22007-1:2023)

ISO 22007-1:2017 describes the background to methods for the determination of the thermal conductivity and thermal diffusivity of polymeric materials. Different techniques are available for these measurements and some may be better suited than others for a particular type, state and form of material. ISO 22007-1:2017 provides a broad overview of these techniques. Standards specific to these techniques, as referenced in this document, are used to carry out the actual test method.

Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 1: Allgemeine Grundlagen (ISO/FDIS 22007-1:2023)

In diesem Dokument werden die Grundlagen für Verfahren zur Bestimmung der Wärmeleitfähigkeit und Temperaturleitfähigkeit polymerer Werkstoffe beschrieben. Für diese Messungen stehen unterschiedliche Verfahren zur Verfügung, und für einen bestimmten Werkstofftyp, eine bestimmte Werkstoffbeschaffenheit oder -form können einige Verfahren geeigneter als andere sein. Dieses Dokument gibt einen umfassenden Überblick über diese Verfahren. Die für diese Verfahren entwickelten Normen werden entsprechend den Verweisungen in diesem Dokument für die Durchführung des jeweiligen Prüfverfahrens angewendet.
SICHERHEITSHINWEIS — Die Anwender dieses Dokuments sollten, falls zutreffend, mit der üblichen Laborpraxis vertraut sein. Dieses Dokument beansprucht nicht, sämtliche mit seiner Anwendung verbundenen Sicherheitsprobleme, soweit diese gegeben sind, zu behandeln. Es liegt in der Verantwortung des Anwenders, die angemessenen Maßnahmen in Bezug auf den Gesundheits- und Arbeitsschutz einzuleiten und die Einhaltung jeglicher gesetzlicher Anforderungen sicherzustellen.

Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 1: Principes généraux (ISO/FDIS 22007-1:2023)

L'ISO 22007-1 :2017 décrit les principes de base des méthodes permettant de déterminer la conductivité thermique et la diffusivité thermique des matériaux polymères. Différentes techniques de mesurage sont disponibles et certaines peuvent être mieux adaptées que d'autres pour un type, un état et une forme particuliers du matériau. L'ISO 22007-1 :2017 donne un aperçu général de ces techniques. Les normes propres à ces techniques, telles que mentionnées dans le présent document, sont utilisées pour la mise en ?uvre de la méthode d'essai réelle.

Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti - 1. del: Splošna načela (ISO/FDIS 22007-1:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 21-Jun-2023
• ICS: 83.080.01 - Plastics in general
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 03-Jan-2024
• Due Date: 21-Feb-2024
• Completion Date: 04-Jan-2024
• Ref Project: FprEN ISO 22007-1 - Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/FDIS 22007‑1:2023)

Relations

• Revised: SIST EN ISO 22007-1:2018 - Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 22007-1:2023
01-maj-2023
Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti
- 1. del: Splošna načela (ISO/DIS 22007-1:2023)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General
principles (ISO/DIS 22007-1:2023)
Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil
1: Allgemeine Grundlagen (ISO/DIS 22007-1:2023)
Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique -
Partie 1: Principes généraux (ISO/DIS 22007-1:2023)
Ta slovenski standard je istoveten z: prEN ISO 22007-1
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 22007-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 22007-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 22007-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22007-1
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-31 2023-06-23
Plastics — Determination of thermal conductivity and
thermal diffusivity —
Part 1:
General principles
Plastiques — Détermination de la conductivité thermique et de la diffusivité thermique —
Partie 1: Principes généraux
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 22007-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 22007-1:2023
ISO/DIS 22007-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22007-1
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:

Plastics — Determination of thermal conductivity and
thermal diffusivity —
Part 1:
General principles
Plastiques — Détermination de la conductivité thermique et de la diffusivité thermique —
Partie 1: Principes généraux
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 22007-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 22007-1:2023
ISO/DIS 22007-1:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references .
...