SIST EN 50332-2:2004
(Main)Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations -- Part 2: Matching of sets with headphones if either or both are offered separately
Sound system equipment: Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations -- Part 2: Matching of sets with headphones if either or both are offered separately
This Part 2 of EN 50332 specifies matching values for the use of battery-operated audio equipment and headphones/earphones defined for the use with those and with standardised connectors allowing to combine components of different manufacturers or different design sold separately in order to avoid possible hearing impairment by excessive sound pressure resulting from them.
Compared with “one-package sets“ the sound pressure level at the ear cannot be fixed by only one condition but needs at least two characteristics, one each for player and the headphones/earphones, defined by the matching values for their connection.
Elektroakustische Geräte: Kopfhörer und Ohrhörer in Verbindung mit tragbaren Audiogeräten - Verfahren zur Messung des maximalen Schalldruckpegels und Angaben zu Grenzwerten -- Teil 2: Anpassung von Geräten und Kopfhörern, wenn eine der beiden oder beide Komponenten getrennt angeboten werden
Equipement de systèmes acoustiques: Casques et écouteurs associés avec un baladeur - Méthode de mesure de niveau maximal de pression acoustique et prise en compte d'une limite -- Partie 2: Adaptation des équipements avec des écouteurs provenant de différents fabricants
Elektroakustične naprave: Naglavne in ušesne slušalke skupaj s prenosno avdio opremo – Metodologija merjenja največjega nivoja zvočnega tlaka in upoštevanje mejnih vrednosti – 2. del: Prilagajanje naprav z naglavnimi slušalkami, če se ena od njiju ali pa obe ponujata ločeno
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 50332-2:2004
STANDARD
september 2004
Elektroakustične naprave: Naglavne in ušesne slušalke skupaj s prenosno
avdio opremo – Metodologija merjenja največjega nivoja zvočnega tlaka in
upoštevanje mejnih vrednosti – 2. del: Prilagajanje naprav z naglavnimi
slušalkami, če se ena od njiju ali pa obe ponujata ločeno
Sound system equipment: Headphones and earphones associated with portable
audio equipment - Maximum sound pressure level measurement methodology and
limit considerations - Part 2: Matching of sets with headphones if either or both are
offered separately
ICS 17.140.50; 33.160.50 Referenčna številka
SIST EN 50332-2:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 50332-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003
ICS 17.140.50; 33.160.50
English version
Sound system equipment:
Headphones and earphones associated with portable audio equipment –
Maximum sound pressure level measurement methodology
and limit considerations
Part 2: Matching of sets with headphones
if either or both are offered separately
Equipement de systèmes acoustiques: Elektroakustische Geräte:
Casques et écouteurs associés Kopfhörer und Ohrhörer in Verbindung
avec un baladeur – mit tragbaren Audiogeräten –
Méthode de mesure de niveau maximal Verfahren zur Messung des maximalen
de pression acoustique et Schalldruckpegels und Angaben
prise en compte d'une limite zu Grenzwerten
Partie 2: Adaptation des équipements Teil 2: Anpassung von Geräten und
avec des écouteurs provenant Kopfhörern, wenn eine der beiden
de différents fabricants oder beide Komponenten getrennt
angeboten werden
This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50332-2:2003 E
---------------------- Page: 2 ----------------------
EN 50332-2:2003 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 206, Consumer
equipment for entertainment and information and related sub-systems.
The Part 1 of this standard describes conditions and procedures for combination of player units and
headphones sold as “one-package sets”. The sound pressure limitation (SPL) of these sets is lost when
players or headphones with standardised sockets and plugs are arbitrarily combined.
This Part 2 provides matching values which guarantee the SPL limit also for the aforementioned condition.
This text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as EN 50332-2 on 2003-07-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-07-01
__________
---------------------- Page: 3 ----------------------
– 3 – EN 50332-2:2003
1 Scope
This Part 2 of EN 50332 specifies matching values for the use of battery-operated audio equipment and
headphones/earphones defined for the use with those and with standardised connectors allowing to
combine components of different manufacturers or different design sold separately in order to avoid
possible hearing impairment by excessive sound pressure resulting from them.
Compared with “one-package sets“ the sound pressure level at the ear cannot be fixed by only one
condition but needs at least two characteristics, one each for player and the headphones/earphones,
defined by the matching values for their connection.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revision of any of these publications apply
to this European Standard only when incorporated in it by amendment or revision. For undated
references, the latest edition or the publication referred to applies.
EN 50332-1:2000 Sound system equipment: Headphones and earphones associated with portable
audio equipment - Maximum sound pressure level measurement methodology and
limit considerations - Part 1: Gene
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.