SIST EN 12430:1999/A1:2007
(Amendment)Thermal insulating products for building applications - Determination of behaviour under point load
Thermal insulating products for building applications - Determination of behaviour under point load
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens unter Punktlast
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement sous charge ponctuelle
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje obnašanja pri točkovni obremenitvi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12430:1999/A1:2007
01-februar-2007
7RSORWQRL]RODFLMVNLSURL]YRGL]DXSRUDERYJUDGEHQLãWYX±8JRWDYOMDQMHREQDãDQMD
SULWRþNRYQLREUHPHQLWYL
Thermal insulating products for building applications - Determination of behaviour under
point load
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens unter Punktlast
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du
comportement sous charge ponctuelle
Ta slovenski standard je istoveten z: EN 12430:1998/A1:2006
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 12430:1999/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12430:1999/A1:2007
---------------------- Page: 2 ----------------------
SIST EN 12430:1999/A1:2007
EUROPEAN STANDARD
EN 12430:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2006
ICS 91.100.99; 91.120.10
English Version
Thermal insulating products for building applications -
Determination of behaviour under point load
Produits isolants thermiques destinés aux applications du Wärmedämmstoffe für das Bauwesen - Bestimmung des
bâtiment - Détermination du comportement sous charge Verhaltens unter Punktlast
ponctuelle
This amendment A1 modifies the European Standard EN 12430:1998; it was approved by CEN on 17 August 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Swede
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.