SIST EN 2599:2002

Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Strips
in aluminium and aluminium alloys
Thickness 0,25 mm L a L 3,2 mm
for aerospace applications.

Luft- und Raumfahrt - Bänder aus Aluminium und Aluminiumlegierungen - Dicken 0,25 < a < 3,2mm - Maße

Diese Norm legt die Maße und Toleranzen von
Bändern
aus Aluminium und Aluminiumlegierungen
Dicken 0,25 mm * a * 3,2 mm
für die Luft- und Raumfahrt fest.

Série aérospatiale - Bandes en aluminium et alliages d'aluminium - Epaisseurs 0,25 < a < 3,2mm - Dimensions

La présente norme spécifie les dimensions et les tolérances des :
Bandes
en aluminium et alliages d'aluminium
Épaisseurs 0,25 mm L a L 3,2 mm
pour applications aérospatiales.

Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions

General Information

• Status: Published
• Publication Date: 31-Dec-2001
• ICS: 49.025.20 - Aluminium
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2002
• Due Date: 01-Jan-2002
• Completion Date: 01-Jan-2002
• Ref Project: EN 2599:2001 - Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2599:2002
01-januar-2002
Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm
< a < 3,2 mm - Dimensions
Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a <
3,2 mm - Dimensions
Luft- und Raumfahrt - Bänder aus Aluminium und Aluminiumlegierungen - Dicken 0,25 <
a < 3,2mm - Maße
Série aérospatiale - Bandes en aluminium et alliages d'aluminium - Epaisseurs 0,25 < a
< 3,2mm - Dimensions
Ta slovenski standard je istoveten z: EN 2599:2001
ICS:
49.025.20 Aluminij Aluminium
SIST EN 2599:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2599:2002

---------------------- Page: 2 ----------------------

SIST EN 2599:2002
EUROPEAN STANDARD
EN 2599
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 49.025.20
English version
Aerospace series - Strips in aluminium and aluminium alloys -
Thickness 0,25 mm
a
3,2 mm - Dimensions
Série aérospatiale - Bandes en aluminium et alliages Luft- und Raumfahrt - Bänder aus Aluminium und
d'aluminium - Epaisseurs 0,25 mm
a
3,2 mm - Aluminiumlegierungen - Dicken 0,25 mm
a
3,2 mm -
Dimensions Maße
This European Standard was approved by CEN on 2 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2599:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2599:2002
Page 2
EN 2599:2001
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, th
...