iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 20127:2024

(Main)

Dentistry - Physical properties of powered toothbrushes (ISO/DIS 20127:2024)

Dentistry - Physical properties of powered toothbrushes (ISO/DIS 20127:2024)

Zahnheilkunde - Physikalische Eigenschaften von elektrischen Zahnbürsten (ISO/DIS 20127:2024)

Médecine bucco-dentaire - Caractéristiques physiques des brosses à dents électriques (ISO/DIS 20127:2024)

Zobozdravstvo - Fizikalne lastnosti električnih zobnih ščetk (ISO/DIS 20127:2024)

General Information

Status
Not Published
Public Enquiry End Date
29-Jun-2024
ICS
11.060.01 - Dentistry in general
97.170 - Body care equipment
Technical Committee
VAZ - Healthcare
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
24-Apr-2024
Due Date
11-Sep-2024
Ref Project
prEN ISO 20127 - Dentistry - Physical properties of powered toothbrushes (ISO/DIS 20127:2024)

Relations

Revises
SIST EN ISO 20127:2020 - Dentistry - Physical properties of powered toothbrushes (ISO 20127:2020)
Effective Date
04-Oct-2023

Buy Standard

prEN ISO 20127:2024prEN ISO 20127:2024
PreviousNext
Draft
prEN ISO 20127:2024
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 20127:2024
01-junij-2024
Zobozdravstvo - Fizikalne lastnosti električnih zobnih ščetk (ISO/DIS 20127:2024)
Dentistry - Physical properties of powered toothbrushes (ISO/DIS 20127:2024)
Zahnheilkunde - Physikalische Eigenschaften von elektrischen Zahnbürsten (ISO/DIS
20127:2024)
Médecine bucco-dentaire - Caractéristiques physiques des brosses à dents électriques
(ISO/DIS 20127:2024)
Ta slovenski standard je istoveten z: prEN ISO 20127
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
97.170 Oprema za nego telesa Body care equipment
oSIST prEN ISO 20127:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 20127:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 20127:2024
DRAFT
International
Standard
ISO/DIS 20127
ISO/TC 106/SC 7
Dentistry — Physical properties of
Secretariat: JISC
powered toothbrushes
Voting begins on:
Médecine bucco-dentaire — Caractéristiques physiques des
2024-04-19
brosses à dents électriques
Voting terminates on:
ICS: 97.170 2024-07-12
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 20127:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 20127:2024
DRAFT
ISO/DIS 20127:2024(en)
International
Standard
ISO/DIS 20127
ISO/TC 106/SC 7
Dentistry — Physical properties of
Secretariat: JISC
powered toothbrushes
Voting begins on:
Médecine bucco-dentaire — Caractéristiques physiques des
brosses à dents électriques
Voting terminates on:
ICS: 97.170
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 20127:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 20127:2024
ISO/DIS 20127:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 20126:2022(Main)
Dentistry - Manual toothbrushes - General requirements and test methods (ISO 20126:2022)
EN ISO 20126:2022

This document specifies requirements and test methods for the physical properties of manual
toothbrushes in order to promote the safety of these products for their intended use.
This document does not specify any requirements and test methods for the physical properties of
toothbrushes for which all the cleaning elements in the head are elastomer.
This document does not apply to manual single tuft toothbrushes, single use, interdental and powered
oral hygiene devices. These types of oral hygiene products are evaluated for their safety in-use by
appropriate test methods or clinical trials.
In addition, for the filaments end-rounding requirements, this document does not apply to particular
filament types which are very thin (less than 0,1 mm outside diameter) or have no sharp edges (e.g.
tapered, feathered, with split tips, or spherical cap) or non-synthetic filaments, where applying endrounding process is inappropriate or impossible. These types of manual toothbrushes are evaluated for
their safety in-use by appropriate test methods or clinical trials appropriately.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28399:2021(Main)
Dentistry - External tooth bleaching products (ISO 28399:2021)
EN ISO 28399:2021

This document specifies the requirements and test methods for external tooth bleaching products.
These products are intended for use in the oral cavity, either by professional application (in-office
tooth bleaching products) or consumer application (professional or non-professional home use of
tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and
manufacturer’s instructions for use.
This document is not applicable to tooth bleaching products:
— specified in ISO 11609;
— intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal)
or using restorative approaches, such as veneers or crowns;
— auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights)
that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE Maximum concentration of a bleaching agent for professional or non-professional use is subject to
each country’s regulatory body.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20127:2020(Main)
Dentistry - Physical properties of powered toothbrushes (ISO 20127:2020)
EN ISO 20127:2020

This document specifies requirements and test methods for the physical properties of powered
toothbrushes in order to promote the safety of these products for their intended use.
There are different technologies of powered toothbrushes. Common features of those powered
toothbrushes to which this document applies are:
— a battery;
— a motor;
— a mechanical or magnetic drive system;
— a moving brush head with tufted filaments.
Powered toothbrushes can have a moving brush head with different motions (e.g. oscillating-rotating,
side-by-side), frequencies and velocities.
The requirements listed in this document apply to all types of powered toothbrushes. However, there is a
possibility that some requirements are not applicable for all types, for example brush head plate retention
can only be applied if the brush has a head portion that might get detached from the brush shaft.
This document is not applicable to other types of powered oral hygiene devices (such as powered
interdental brushes) or manual toothbrushes.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20126:2022(Main)
Dentistry - Manual toothbrushes - General requirements and test methods (ISO 20126:2022)
EN ISO 20126:2022

This document specifies requirements and test methods for the physical properties of manual
toothbrushes in order to promote the safety of these products for their intended use.
This document does not specify any requirements and test methods for the physical properties of
toothbrushes for which all the cleaning elements in the head are elastomer.
This document does not apply to manual single tuft toothbrushes, single use, interdental and powered
oral hygiene devices. These types of oral hygiene products are evaluated for their safety in-use by
appropriate test methods or clinical trials.
In addition, for the filaments end-rounding requirements, this document does not apply to particular
filament types which are very thin (less than 0,1 mm outside diameter) or have no sharp edges (e.g.
tapered, feathered, with split tips, or spherical cap) or non-synthetic filaments, where applying endrounding process is inappropriate or impossible. These types of manual toothbrushes are evaluated for
their safety in-use by appropriate test methods or clinical trials appropriately.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63174:2022(Main)
Electrically operated toothbrushes - Method for measuring performance
EN IEC 63174:2022

This document deals with the methods for measuring the performance of electrically powered toothbrushes.
This document applies to electrically powered toothbrushes used for cleaning the teeth with electric energy to drive. Rechargeable toothbrushes and primary battery powered toothbrushes, both for adult and child, are within the scope of this standard.
This standard is just to specify the measurement method but does not define any limit value.
NOTE: The electrically powered toothbrushes are classified as follows:
Classification with regard to supply modes:
- primary battery powered toothbrush
- rechargeable toothbrush
-- wireless rechargeable toothbrush
-- corded rechargeable toothbrush
Classification with regard to moving modes:
- rotary electrically powered toothbrush
- reciprocated electrically powered toothbrush
-- linear reciprocated electrically powered toothbrush
-- rotational reciprocated electrically powered toothbrush
- vibratory electrically powered toothbrush
The different types are clarified for information, since there is no difference in the tests to be done, except for the types of primary battery powered toothbrush and rechargeable toothbrush.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28399:2021(Main)
Dentistry - External tooth bleaching products (ISO 28399:2021)
EN ISO 28399:2021

This document specifies the requirements and test methods for external tooth bleaching products.
These products are intended for use in the oral cavity, either by professional application (in-office
tooth bleaching products) or consumer application (professional or non-professional home use of
tooth bleaching products), or both. It also specifies requirements for their packaging, labelling and
manufacturer’s instructions for use.
This document is not applicable to tooth bleaching products:
— specified in ISO 11609;
— intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal)
or using restorative approaches, such as veneers or crowns;
— auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights)
that are used in conjunction with the bleaching products.
This document does not specify biological safety aspects of tooth bleaching products.
NOTE Maximum concentration of a bleaching agent for professional or non-professional use is subject to
each country’s regulatory body.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20127:2020(Main)
Dentistry - Physical properties of powered toothbrushes (ISO 20127:2020)
EN ISO 20127:2020

This document specifies requirements and test methods for the physical properties of powered
toothbrushes in order to promote the safety of these products for their intended use.
There are different technologies of powered toothbrushes. Common features of those powered
toothbrushes to which this document applies are:
— a battery;
— a motor;
— a mechanical or magnetic drive system;
— a moving brush head with tufted filaments.
Powered toothbrushes can have a moving brush head with different motions (e.g. oscillating-rotating,
side-by-side), frequencies and velocities.
The requirements listed in this document apply to all types of powered toothbrushes. However, there is a
possibility that some requirements are not applicable for all types, for example brush head plate retention
can only be applied if the brush has a head portion that might get detached from the brush shaft.
This document is not applicable to other types of powered oral hygiene devices (such as powered
interdental brushes) or manual toothbrushes.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises.
This document
-   specifies:
-   technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing;
-   the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file;
-   associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security;
-   three different grades of safety/security, with the respective product functionalities required to achieve them;
-   the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities;
-   the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers;
-   describes:
-   the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS;
-   is intended to support the implementation of:
-   National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws);
-   gives relevant guidance on:
-   the organizational risk management;
-   does not replace the specifications of standards to the following systems:
-   fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems,
-   security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems,
-   applicable national standards on call systems.
All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems.
Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met.
This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management.
This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1751:2024(Main)
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
EN 1751:2024

This document specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa.
The tests incorporated in this document will address:
-   leakage past a closed damper or valve (for classification see Annex C);
-   casing leakage (for classification see Annex C);
-   flow rate/pressure requirement characteristics;
-   torque: (see Annex A);
-   thermal transmittance: (see Annex B).
The acoustic testing of dampers and valves is not included in this document. The tests specified above apply to the following:
-   measurement of leakage past a closed damper or valve;
-   measurement of casing leakage;
-   determination of flow rate and pressure requirements;
-   measurement of torque characteristics (see Annex A);
-   measurement of thermal transfer characteristics to determine insulation properties (see Annex B).
NOTE   Certain aspects of the dynamic performance of dampers and/or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this document. Also, in common with other air distribution components, the results from tests carried out in accordance with this document may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50528:2024(Main)
Insulating ladders for use on or near low voltage electrical installations
EN 50528:2024

This document is applicable to portable ladders made only of non-conductive stiles, including accessories (pole leaning device, adjustable levelling device, adjustable ladder stabilizer, etc.) used to work on or near electrical systems and installations in the low voltage range (up to 1 000 V AC/1 500 V DC.).
These ladders are used, to provide temporary access, generally on overhead line structures and to undertake electrical operations. They are intended to be used by one person only.
These ladders, in conjunction with other protective equipment provide sufficient insulation level to protect against inadvertent contact with live low voltage installations.
This document does not cover ladders used for live working on electrical installations at voltages above 1 000 V AC and above 1 500 V DC. These insulating ladders are separately covered by EN 61478.
This document does not cover products not made entirely with non-conductive stiles generally called mixed ladders. In this case EN 131 series apply.
This document does not cover step stools which are covered by EN 14183.
These ladders are only for professional use. Only skill persons, after an appropriate training can use this type of ladder for professional applications.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate).

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day