SIST EN 60068-3-7:2002

Environmental testing -- Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

Provides a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in climatic test procedures of EN 60068-2-1 and EN 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This standard is destined primarily for users when conducting regular chamber performance monitoring.

Umweltprüfungen -- Teil 3-7: Unterstützende Dokumentation und Leitfaden - Messungen in Temperaturprüfkammern für die Prüfungen A und B (mit Prüfgut)

Essais d'environnement -- Partie 3-7: Documentation d'accompagnement et guide - Mesures dans les chambres d'essai en température pour les essais A et B (avec charge)

Fournit une méthode uniforme et reproductible pour confirmer que les chambres d'essai en température sont conformes aux exigences spécifiées dans les méthodes d'essais climatiques de la EN 60068-2-1 et de la EN 60068-2-2 quand elles sont chargées de spécimens dissipateurs d'énergie ou non, avec des conditions qui tiennent compte d'une circulation d'air à l'intérieur de l'espace de travail de la chambre. Cette norme est en premier lieu destinée à aider les utilisateurs lorsqu'ils réalisent des contrôles réguliers des performances de leur chambre d'essai.

Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 24-Aug-2023
• ICS: 19.040 - Environmental testing
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Aug-2023
• Due Date: 14-Sep-2023
• Completion Date: 25-Aug-2023
• Ref Project: EN 60068-3-7:2002 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

Relations

• Replaced By: SIST EN IEC 60068-3-7:2020 - Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) (IEC 60068-3-7:2020)
• Effective Date: 01-Sep-2020

Standards Content (Sample)

SLOVENSKI SIST EN 60068-3-7:2002
prva izdaja
STANDARD
september 2002
Environmental testing - Part 3-7: Supporting documentation and guidance -
Measurements in temperature chambers for tests A and B (with load)
ICS 19.040; 29.020 Referenčna številka
SIST EN 60068-3-7:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60068-3-7
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2002
ICS 19.040; 29.020
English version
Environmental testing
Part 3-7: Supporting documentation and guidance –
Measurements in temperature chambers
for tests A and B (with load)
(IEC 60068-3-7:2001)
Essais d'environnement Umweltprüfungen
Partie 3-7: Documentation Teil 3-7: Unterstützende
d'accompagnement et guide – Dokumentation und Leitfaden –
Mesures dans les chambres Messungen in Temperaturprüfkammern
d'essai en température pour für die Prüfungen A und B (mit Prüfgut)
les essais A et B (avec charge) (IEC 60068-3-7:2001)
(CEI 60068-3-7:2001)
This European Standard was approved by CENELEC on 2001-12-04. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60068-3-7:2002 E

---------------------- Page: 2 ----------------------

EN 60068-3-7:2002 - 2 -
Foreword
The text of document 104/211/FDIS, future edition 1 of IEC 60068-3-7, prepared by IEC TC 104,
Environmental conditions, classification and methods of test, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 60068-3-7 on 2001-12-04.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-12-01
This European Standard should be read in conjunction with EN 60068-3-5 and EN 60068-3-6.
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60068-3-7:2001 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60068-3-7:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-1 - Environmental testing EN 60068-2-1 1993
Part 2: Tests - Tests A: Cold
1) 2)
IEC 60068-2-2 - Part 2: Tests - Test B: Dry heat HD 323.2.2 S1 1988
1) 2)
IEC 60068-3-1 - Part 3: Background information -- EN 60068-3-1 1999
Section 1: Cold and dry heat tests
1) 2)
IEC 60068-3-5 - Part 3-5: Supporting documentation and EN 60068-3-5 2002
guidance - Confirmation of the
performance of temperature chambers
1) 2)
IEC 60068-3-6 - Part 3-6: Supporting documentation and EN 60068-3-6 2002
guidance - Confirmation of the
performance of temperature/humidity
chambers
1) 2)
IEC 60584-1 - Thermocouples EN 6
...