SIST EN ISO 10848-3:2006
(Main)Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO 10848-3:2006)
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO 10848-3:2006)
ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to characterize the flanking transmission of one or several building components. The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2. This part of ISO 10848 is specifically referred to in ISO 10848-1:2006, 4.4, as being a supporting part to the frame document. This part of ISO 10848 applies to structurally connected light elements forming a T or X junction. A light element is defined in ISO 10848-1:2006, Clause 3. The relevant quantity to be measured is selected according to ISO 10848-1:2006, 4.4. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn,f and/or Ln,f) or as the vibration reduction index Kij of a junction. Dn,f and Ln,f depend on the actual dimensions of the elements, while Kij is in principle an invariant quantity. For general application of the test results, Dn,f and Ln,f are the relevant quantities to measure for lightweight, well-damped types of elements (for example, timber or metal framed stud walls or wooden floors on beams), where the actual situation has no real influence on the sound reduction index and damping of the elements. If the acoustical properties of the elements are substantially influenced by the actual situation, Kij is the relevant quantity to measure.
Akustik - Messung der Flankenübertragung von Luftschall und Trittschall zwischen benachbarten Räumen in Prüfständen - Teil 3: Anwendung auf leichte Bauteile, wenn die Verbindung wesentlichen Einfluss hat (ISO 10848-3:2006)
ISO 10848 legt Messverfahren zur Bestimmung der Flankenübertragung eines oder mehrerer Bauteile fest, die in dafür ausgelegten Prüfständen durchzuführen sind.
Die gemessenen Größen können zum Vergleich unterschiedlicher Produkte, beim Festlegen einer Anforderung oder als Eingangsdaten für Voraussageverfahren, wie in EN 12354-1 und EN 12354-2 beschrieben, verwendet werden.
ISO 10848-1:2006, 4.4 verweist speziell auf den vorliegenden Teil der ISO 10848 als eine unterstützende Norm zum Rahmendokument.
Dieser Teil der ISO 10848 gilt für baulich verbundene leichte Bauteile, die einen T- oder Kreuzstoß bilden. Ein leichtes Bauteil ist in ISO 10848-1:2006, Abschnitt 3 definiert.
Die entsprechende zu messende Größe wird nach ISO 10848-1:2006, 4.4 ausgewählt. Die Gebrauchstauglichkeit der Bauteile wird entweder als Gesamtgröße für die Kombination von Bauteilen und Verbindung (z. B. Dn,f und/oder Ln,f) oder als Stoßstellendämm-Maß Kij einer Verbindung angegeben. Dn,f und Ln,f hängen von den tatsächlichen Maßen der Bauteile ab, während Kij grundsätzlich eine invariante Größe darstellt.
Für die allgemeine Anwendung der Prüfergebnisse sind Dn,f und Ln,f die relevanten Messgrößen bei gut gedämpften Arten von Leichtbauteilen (beispielsweise Holzständer- oder Metallständerwände oder Holzfußböden auf Trägern), bei denen die tatsächlich vorliegenden Gegebenheiten keinen wirklichen Einfluss auf das Schalldämm-Maß und die Dämpfung der Bauteile haben. Sofern die akustischen Eigenschaften der Bauteile durch die tatsächlich vorliegenden Gegebenheiten wesentlich beeinflusst werden, stellt Kij die relevante zu messende Größe dar.
Acoustique - Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre pieces adjacentes - Partie 3: Application aux éléments légers lorsque la jonction a une influence importante (ISO 10848-3:2006)
L'ISO 10848-3:2006 s'applique aux éléments légers reliés structurellement et formant une jonction en T ou en X. Les performances des éléments de construction sont exprimées soit par une grandeur globale représentative de l'association des éléments et de la jonction, soit par l'indice d'affaiblissement vibratoire d'une jonction.
Akustika - Laboratorijsko merjenje bočnega prenosa zvoka v zraku in udarnega zvoka med mejnimi prostori - 3. del: Uporaba lahkih elementov pri bistvenem vplivu stikov (ISO 10848-3:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10848-3:2006
01-julij-2006
$NXVWLND/DERUDWRULMVNRPHUMHQMHERþQHJDSUHQRVD]YRNDY]UDNXLQXGDUQHJD
]YRNDPHGPHMQLPLSURVWRULGHO 8SRUDEDODKNLKHOHPHQWRYSULELVWYHQHP
YSOLYXVWLNRY ,62
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact
sound between adjoining rooms - Part 3: Application to light elements when the junction
has a substantial influence (ISO 10848-3:2006)
Akustik - Messung der Flankenübertragung von Luftschall und Trittschall zwischen
benachbarten Räumen in Prüfständen - Teil 3: Anwendung auf leichte Bauteile, wenn die
Verbindung wesentlichen Einfluss hat (ISO 10848-3:2006)
Acoustique - Mesurage en laboratoire des transmissions latérales du bruit aérien et des
bruits de choc entre pieces adjacentes - Partie 3: Application aux éléments légers
lorsque la jonction a une influence importante (ISO 10848-3:2006)
Ta slovenski standard je istoveten z: EN ISO 10848-3:2006
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 10848-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10848-3:2006
---------------------- Page: 2 ----------------------
SIST EN ISO 10848-3:2006
EUROPEAN STANDARD
EN ISO 10848-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 91.120.20
English Version
Acoustics - Laboratory measurement of the flanking
transmission of airborne and impact sound between adjoining
rooms - Part 3: Application to light elements when the junction
has a substantial influence (ISO 10848-3:2006)
Acoustique - Mesurage en laboratoire des transmissions Akustik - Messung der Flankenübertragung von Luftschall
latérales du bruit aérien et des bruits de choc entre pièces und Trittschall zwischen benachbarten Räumen in
adjacentes - Partie 3: Application aux éléments légers Prüfständen - Teil 3: Anwendung auf leichte Bauteile, wenn
lorsque la jonction a une influence importante (ISO 10848- die Verbindung wesentlichen Einfluss hat (ISO 10848-
3:2006) 3:2006)
This European Standard was approved by CEN on 16 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10848-3:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10848-3:2006
EN ISO 10848-3:2006 (E)
Foreword
This document (EN ISO 10848-3:2006) has been prepared by Technical Committee CEN/TC
126 "Acoustic properties of building elements and of buildings", the secretariat of which is held
by AFNOR, in collaboration with Technical Committee ISO/TC 43 "Acoustics".
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2006, and conflicting national
standards shall be withdrawn at the latest by October 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10848-3:2006
INTERNATIONAL ISO
STANDARD 10848-3
First edition
2006-04-01
Acoustics — Laboratory measurement of
the flanking transmission of airborne and
impact sound between adjoining
rooms —
Part 3:
Application to light elements when the
junction has a substantial influence
Acoustique — Mesurage en laboratoire des transmissions latérales du
bruit aérien et des bruits de choc entre des pièces adjacentes —
Partie 3: Application aux éléments légers lorsque la jonction a une
influence importante
Reference number
ISO 10848-3:2006(E)
©
ISO 2006
---------------------- Page: 5 ----------------------
SIST EN ISO 10848-3:2006
ISO 10848-3:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 10848-3:2006
ISO 10848-3:2006(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Measuring equipment. 3
5 Test arrangement. 3
5.1 Requirements for the laboratory. 3
5.2 Installation of the test junction. 3
5.3 Shielding technique. 4
6 Test procedures . 4
7 Precision. 4
8 Expression of results . 4
9 Test report . 5
Annex A (informative) Measurement of D and L with intensity technique. 7
n,f,I n,f,I
Bibliography . 8
© ISO 2006 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 10848-3:2006
ISO 10848-3:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10848-3 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with Technical
Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics, in accordance with the Agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
ISO 10848 consists of the following parts, under the general title Acoustics — Laboratory measurement of the
flanking transmission of airborne and impact sound between adjoining rooms:
⎯ Part 1: Frame document
⎯ Part 2: Application to light elements when the junction has a small influence
⎯ Part 3: Application to light elements when the junction has a substantial influence
The following part is under preparation:
⎯ Part 4: Application to all other cases
iv © ISO 2006 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10848-3:2006
INTERNATIONAL STANDARD ISO 10848-3:2006(E)
Acoustics — Laboratory measurement of the flanking
transmission of airborne and impact sound between adjoining
rooms —
Part 3:
Application to light elements when the junction has a
substantial influence
1 Scope
ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to
characterize the flanking transmission of one or several building components.
The measured quantities can be used to compare different products, or to express a requirement, or as input
data for prediction methods, such as EN 12354-1 and EN 12354-2.
This part of ISO 10848 is specifically referred to in ISO 10848-1:2006, 4.4, as being a supporting part to the
frame document.
This part of ISO 10848 applies to structurally connected light elements forming a T or X junction. A light
element is defined in ISO 10848-1:2006, Clause 3.
The relevant quantity to be measured is selected according to ISO 10848-1:2006, 4.4. The performance of the
building components is expressed either as an overall quantity for the combination of elements and junction
(such as D and/or L ) or as the vibration reduction index K of a junction. D and L depend on the actual
n,f n,f ij n,f n,f
dimensions of the elements, while K is in principle an invariant quantity.
ij
For general application of the test results, D and L are the relevant quantities to measure for lightweight,
n,f n,f
well-damped types of elements (for example, timber or metal framed stud walls or wooden floors on beams),
where the actual situation has no real influence on the sound reduction index and damping of the elements. If
the acoustical properties of the elements are substantially influenced by the actual situation, K is the relevant
ij
quantity to measure.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 140-2, Acoustics — Measurement of sound insulation in buildings and of building elements — Part 2:
Determination, verificatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.