SIST EN ISO 10563:2005
(Main)Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005)
Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005)
ISO 10563:2005 specifies a method for the determination of the change of mass and the change of volume of sealants used in joints in building construction. It is not suitable for self-levelling sealants.
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO 10563:2005)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Änderung von Masse und Volumen von Dichtstoffen fest, die zur Abdichtung von Fugen im Hochbau verwendet werden. Diese Internationale Norm kann nicht auf selbstausgleichende Fugendichtstoffe angewendet werden.
Construction immobiliere - Mastics - Détermination des variations de masse et de volume (ISO 10563:2005)
L'ISO 10563:2005 décrit une méthode pour la détermination des variations de masse et de volume des mastics utilisés comme joints dans la construction immobilière. Elle ne s'applique pas aux mastics autonivelants.
Gradnja objektov – Tesnilne mase – Ugotavljanje spremembe mase in prostornine (ISO 10563:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10563:2005
01-december-2005
1DGRPHãþD
SIST EN ISO 10563:2001
Gradnja objektov – Tesnilne mase – Ugotavljanje spremembe mase in prostornine
(ISO 10563:2005)
Building construction - Sealants - Determination of change in mass and volume (ISO
10563:2005)
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO
10563:2005)
Construction immobiliere - Mastics - Détermination des variations de masse et de
volume (ISO 10563:2005)
Ta slovenski standard je istoveten z: EN ISO 10563:2005
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 10563:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10563:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 10563:2005
EUROPEAN STANDARD
EN ISO 10563
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 91.100.50 Supersedes EN ISO 10563:1997
English Version
Building construction - Sealants - Determination of change in
mass and volume (ISO 10563:2005)
Construction immobilière - Mastics - Détermination des Hochbau - Fugendichtstoffe - Bestimmung der Änderung
variations de masse et de volume (ISO 10563:2005) von Masse und Volumen (ISO 10563:2005)
This European Standard was approved by CEN on 27 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10563:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10563:2005
EN ISO 10563:2005 (E)
Foreword
This document (EN ISO 10563:2005) has been prepared by Technical Committee ISO/TC 59
"Building construction" in collaboration with CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2006, and conflicting national
standards shall be withdrawn at the latest by January 2006.
This document supersedes EN ISO 10563:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 10563:2005 has been approved by CEN as EN ISO 10563:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10563:2005
INTERNATIONAL ISO
STANDARD 10563
Second edition
2005-07-01
Building construction — Sealants —
Determination of change in mass
and volume
Construction immobilière — Mastics — Détermination des variations de
masse et de volume
Reference number
ISO 10563:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 10563:2005
ISO 10563:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 10563:2005
ISO 10563:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requir
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.