SIST EN 492:2005/A1:2006

Fibre-cement slates and fittings - Product specification and test methods

This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses: - roofing, - internal wall finishes, - external wall and ceiling finishes. It applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this standard, fibre-cement slates have been classified according to their bending moment. This document covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1. This standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und Prüfverfahren

Ardoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit et méthodes d'essai

Vlaknato-cementne strešne plošče in fazonski kosi – Specifikacija za izdelek in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2005
• Withdrawal Date: 04-Mar-2013
• ICS: 91.060.20 - Roofs
• ICS: 91.100.40 - Products in fibre-reinforced cement
• Technical Committee: IKER - Ceramics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Mar-2013
• Due Date: 27-Mar-2013
• Completion Date: 05-Mar-2013
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: EN 492:2004/A1:2005 - Fibre-cement slates and fittings - Product specification and test methods

Relations

• Replaced By: SIST EN 492:2013 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 01-Apr-2013
• Amends: SIST EN 492:2005 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 22-Dec-2008
• Amends: SIST EN 492:2005 - Fibre-cement slates and fittings - Product specification and test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 492:2005/A1:2006
01-januar-2006
9ODNQDWRFHPHQWQHVWUHãQHSORãþHLQID]RQVNLNRVL±6SHFLILNDFLMD]DL]GHOHNLQ
SUHVNXVQHPHWRGH
Fibre-cement slates and fittings - Product specification and test methods
Faserzement-Dachplatten und dazugehörige Formteile - Produktspezifikation und
Prüfverfahren
Ardoises en fibres-ciment et leurs accessoires en fibres-ciment - Spécification du produit
et méthodes d'essai
Ta slovenski standard je istoveten z: EN 492:2004/A1:2005
ICS:
91.060.20
91.100.40
SIST EN 492:2005/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 492:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 91.100.40

English Version
Fibre-cement slates and fittings - Product specification and test
methods
Ardoises en fibres-ciment et leurs accessoires en fibres- Faserzement-Dachplatten und dazugehörige Formteile -
ciment - Spécification du produit et méthodes d'essai Produktspezifikation und Prüfverfahren
This amendment A1 modifies the European Standard EN 492:2004; it was approved by CEN on 20 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 492:2004/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 492:2004/A1:2005 (E)
Contents Page
1 Modification to the foreword.4
2 Modifications in Clause 5 .
...