iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 21028-1:2024

(Main)

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2024)

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2024)

ISO 21028-1:2016 specifies the toughness requirements of metallic materials for use at a temperature below -80 °C to ensure their suitability for cryogenic vessels.
ISO 21028-1:2016 is not applicable to unalloyed steels and cast materials.

Kryo-Behälter - Zähigkeitsanforderungen an Werkstoffe bei kryogenen Temperaturen - Teil 1: Temperaturen unter −80 °C (ISO/DIS 21028-1:2024)

Récipients cryogéniques - Exigences de ténacité pour les matériaux à température cryogénique - Partie 1: Températures inférieures à -80 degrés C (ISO/DIS 21028-1:2024)

ISO 21028-1:2016 spécifie les exigences de ténacité des matériaux métalliques utilisables à une température inférieure à −80 °C, pour assurer leur aptitude à l'emploi pour les récipients cryogéniques.
ISO 21028-1:2016 ne s'applique pas aux aciers non alliés ni aux matériaux moulés.

Kriogene posode - Zahteve za žilavost materialov pri kriogenih temperaturah - 1. del: Temperature pod –80 °C (ISO/DIS 21028-1:2024)

General Information

Status
Not Published
Public Enquiry End Date
02-Jun-2024
ICS
23.020.40 - Cryogenic vessels
Technical Committee
TLP - Pressure vessels
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
09-Apr-2024
Due Date
27-Aug-2024
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/TDG - Standards for referencing in the RID-ADR
Ref Project
prEN ISO 21028-1 - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C (ISO/DIS 21028‑1:2024)

Relations

Revises
SIST EN ISO 21028-1:2017 - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
Effective Date
01-May-2024

Buy Standard

prEN ISO 21028-1:2024prEN ISO 21028-1:2024
PreviousNext
Draft
prEN ISO 21028-1:2024
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 21028-1:2024
01-maj-2024
Kriogene posode - Zahteve za žilavost materialov pri kriogenih temperaturah - 1.
del: Temperature pod –80 °C (ISO/DIS 21028-1:2024)
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature -
Part 1: Temperatures below -80 degrees C (ISO/DIS 21028-1:2024)
Kryo-Behälter - Zähigkeitsanforderungen an Werkstoffe bei kryogenen Temperaturen -
Teil 1: Temperaturen unter −80 °C (ISO/DIS 21028-1:2024)
Récipients cryogéniques - Exigences de ténacité pour les matériaux à température
cryogénique - Partie 1: Températures inférieures à -80 degrés C (ISO/DIS 21028-
1:2024)
Ta slovenski standard je istoveten z: prEN ISO 21028-1
ICS:
23.020.40 Proti mrazu odporne posode Cryogenic vessels
(kriogenske posode)
oSIST prEN ISO 21028-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 21028-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 21028-1:2024
DRAFT
International
Standard
ISO/DIS 21028-1
ISO/TC 220
Cryogenic vessels — Toughness
Secretariat: AFNOR
requirements for materials at
Voting begins on:
cryogenic temperature —
2024-03-25
Part 1:
Voting terminates on:
2024-06-17
Temperatures below -80 degrees C
Récipients cryogéniques — Exigences de ténacité pour les
matériaux à température cryogénique —
Partie 1: Températures inférieures à -80 degrés C
ICS: 23.020.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 21028-1:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 21028-1:2024
DRAFT
ISO/DIS 21028-1:2024(en)
International
Standard
ISO/DIS 21028-1
ISO/TC 220
Cryogenic vessels — Toughness
Secretariat: AFNOR
requirements for materials at
Voting begins on:
cryogenic temperature —
Part 1:
Voting terminates on:
Temperatures below -80 degrees C
Récipients cryogéniques — Exigences de ténacité pour les
matériaux à température cryogénique —
Partie 1: Températures inférieures à -80 degrés C
ICS: 23.020.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 21028-1:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 21028-1:2024
ISO/DIS 21028-1:2024(en)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17527:2022(Main)
Helium cryostats - Protection against excessive pressure
EN 17527:2021

This document specifies the minimum requirements for the protection of helium cryostats against excessive pressure, including the specific risks associated with cryostats for superconducting magnets and cryostats for superconducting radio-frequency cavities, coldboxes of helium refrigerators and liquefiers as well as helium distribution systems including valve boxes. It includes risk assessment, protection concepts, dimensioning of pressure relief devices, types of pressure relief devices, substance release and operation of helium cryostats.
In order to fulfil the aim of this document, the characteristics of pressure relief devices are taken into account.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23208:2019/A1:2020(Amendment)
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
EN ISO 23208:2019/A1:2020
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23208:2019(Main)
Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)
EN ISO 23208:2019

This document specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories that are in contact with the cryogenic fluid at any expected operating conditions.
This document defines the acceptable level of surface and particle contamination to minimize the risk of malfunction of equipment and ensure safety against ignition when in contact with oxygen or oxidizing fluids (see EN ISO 10156).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21012:2019(Main)
Cryogenic vessels - Hoses (ISO 21012:2018)
EN ISO 21012:2018

This standard gives design, construction, type and production testing, and marking requirements for non insulated cryogenic flexible hose used for the transfer of cryogenic fluids within the following range of operating conditions : - working temperature: from - 270 °C to + 65 °C ; - maximum nominal pressure: 80 bar ; - nominal size (DN): from 10 to 100. End fittings for mounting of any couplings are within the scope of this standard, but the couplings are subject to other standards. It is intended that the hose be designed and tested to satisfy the generally accepted nominal pressure e.g. PN 40. Hoses may then be selected with a PN equal to or greater than the maximum allowable pressure (PS) of the equipment to which it is to be used.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21028-2:2018(Main)
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
EN ISO 21028-2:2018

This European Standard specifies the toughness requirements of the metallic materials for use at a temperature between - 80 °C and - 20 °C ensuring suitability for use for the cryogenic vessels. Fine grain and low alloyed steels with specified yield strength <= 460 N/mm², aluminium and aluminium alloys, copper and copper alloys and austenitic stainless steels are covered by this standard.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20421-2:2017(Main)
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO 20421-2:2017)
EN ISO 20421-2:2017

This European Standard applies to operational requirements for large transportable vacuum insulated cryogenic vessels of more than 1000 litres volume. The scope includes putting into service, filling, withdrawal, transport within the location, maintenance, periodic inspection and emergency procedures. Operational requirements for usage these vessels on public roads, rail, sea and air are not covered. For the transportation of these vessels by public road, rail, sea and air, other requirements apply; these are defined in specific regulations. The standard applies to vessels for cryogenic fluids as specified in WI 004.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24490:2017(Main)
Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016)
EN ISO 24490:2016

This standard specifies the minimum requirements for the design, manufacture and testing of pumps for cryogenic service (i.e. for operation with cryogenic fluids below -10°C). This standard covers centrifugal pumps. However the principles may be applied to other types of pumps (e.g. reciprocating). This standard also gives guidance on the design of installations. (See annex A). It does not specify requirements on operation or maintenance.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21028-1:2017(Main)
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
EN ISO 21028-1:2016

This European standard specifies the toughness requirements of metallic materials for use at a temperature below - 80 øC to ensure their suitability for cryogenic vessels. This standard is not applicable to unalloyed steels and cast materials. This standard is not applicable to cryogenic vessels for liquefied natural gas (LNG).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21013-3:2016(Main)
Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
EN ISO 21013-3:2016

This standard provides a separate calculation method for determining the contributing mass flow to be relieved resulting from each of the following specified conditions: - vacuum insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; - vacuum insulated vessels with insulation system remaining in place but with loss of vacuum, or non vacuum insulated vessels with insulation system intact. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; - vacuum or non vacuum insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum insulated vessels, and fire engulfment. Inner vessel at temperature of the contents at the relieving pressure; - vessels with insulation system totally lost and fire engulfment. Good engineering practice based on well established theoretical physical science shall be adopted to determine the contributing mass flow where an appropriate calculation method is not provided for an applicable condition.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21009-2:2016(Main)
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015)
EN ISO 21009-2:2015

ISO 21009-2:2015 specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar). ISO 21009-2:2015 applies to vessels designed for cryogenic fluids specified in ISO 21009‑1. Static cryogenic vessels are often partly equipped by the manufacturer, but may be installed or re-installed by another party, such as the operator, user or owner. NOTE 1 For the installation of these vessels, additional requirements can apply; these are defined in specific regulations. NOTE 2 Some requirements of this standard can be covered by local regulations, e.g. safety distances, occupational safety and health. Where there is a conflict between the requirements of this International Standard and any applicable local regulation, the local regulation always takes precedence.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    22 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day