iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60745-2-6:2003/A12:2010

(Amendment)

Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers

Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers

TC request further to D132/C076: 2MV with dop/dow=2009-12-29 - To be ratified as a new edition

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-6: Besondere Anforderungen für Hämmer

Outils électroportatifs à moteur - Sécurité -- Partie 2-6: Règles particulières pour les marteaux

Električna ročna orodja - Varnost - 2-6. del: Posebne zahteve za kladiva

Amandma A12:2010 je dodatek k standardu SIST EN 60745-2-6:2003
Obravnava varnost motornih ali magnetno gnanih ročnih orodij, zlasti kladiv. Nazivna napetost ne sme presegati 250 V za orodja z enofaznim izmeničnim ali enosmernim tokom in 440 V za orodja s trofaznim izmeničnim tokom. Orodja, ki jih zajema ta standard, med drugim vključujejo udarna in vrtalna kladiva.

General Information

Status
Withdrawn
Publication Date
15-Feb-2010
Withdrawal Date
28-Mar-2017
ICS
25.140.20 - Electric tools
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
29-Mar-2017
Due Date
21-Apr-2017
Completion Date
29-Mar-2017
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 60745-2-6:2003/A12:2009 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

Relations

Amends
SIST EN 60745-2-6:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
Effective Date
01-Mar-2009
Replaced By
SIST EN 60745-2-6:2010 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified + A1:2006 + A2:2008)
Effective Date
29-Jan-2023
Replaced By
SIST EN 60745-2-6:2010 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified + A1:2006 + A2:2008)
Effective Date
07-Jun-2022
Amends
SIST EN 60745-2-6:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
Effective Date
29-Jan-2023
Amends
SIST EN 60745-2-6:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
Effective Date
07-Jun-2022

Buy Standard

EN 60745-2-6:2003/A12:2010EN 60745-2-6:2003/A12:2010
PreviousNext
Amendment
EN 60745-2-6:2003/A12:2010
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-6:2003/A12:2010
01-marec-2010
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DNODGLYD
Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for
hammers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-6: Besondere
Anforderungen für Hämmer
Outils électroportatifs à moteur - Sécurité -- Partie 2-6: Règles particulières pour les
marteaux
Ta slovenski standard je istoveten z: EN 60745-2-6:2003/A12:2009
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-6:2003/A12:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-6:2003/A12:2010

---------------------- Page: 2 ----------------------

SIST EN 60745-2-6:2003/A12:2010

EUROPEAN STANDARD
EN 60745-2-6/A12

NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM

ICS 25.140.20


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-6: Particular requirements for hammers



Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-6: Règles particulières Sicherheit -
pour les marteaux Teil 2-6: Besondere Anforderungen
für Hämmer





This amendment A12 modifies the European Standard EN 60745-2-6:2003; it was approved by CENELEC on
2009-11-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-6:2003/A12:2009 E

--------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62841-4-3:2021(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers (IEC 62841-4-3:2020)
EN IEC 62841-4-3:2021

This clause of Part 1 is applicable, except as follows:
Addition:
This document applies to the design of pedestrian controlled walk-behind
– cylinder lawnmowers;
and
– rotary lawnmowers equipped with
– metallic cutting means; and/or
– rigid non-metallic cutting means; and/or
– non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to
achieve cutting, and have a kinetic energy for each single cutting element of greater than 10 J.
NOTE 101 Machines that have non-metallic cutting means and a kinetic energy for each single cutting element
of less than or equal to 10 J are considered to be lawn trimmers.
This document does not apply to
– robotic lawnmowers;
– remote-controlled lawnmowers;
– flail mowers or flail-type attachments;
– scissors type lawnmowers;
– grassland mowers;
– sickle bar mowers;
– towed/semi-mounted grass-cutting machines;
– scrub-clearing machines;
– lawn trimmers and lawn edge trimmers;
– lawn edgers;
– grass trimmers;
– brush cutters;
– brush saws;
– agricultural mowers;
– trailing seat/sulky units;
– ride-on machines;
– non-powered lawnmowers;
– combustion engine powered lawnmowers;
– hybrid and fuel cell powered machines and associated charging systems; and
– garden tractors or their attachments.
NOTE 102 Robotic lawnmowers are covered by IEC 60335-2-107, and will be covered by a future part of IEC 62841.
NOTE 103 Lawn trimmers and lawn edge trimmers are covered by IEC 60335-2-91.
NOTE 104 Lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws will be covered by a future part of IEC 62841.
NOTE 105 Lawn edgers will be covered by a future part of IEC 62841.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-4-3:2021/A11:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
EN IEC 62841-4-3:2021/A11:2021

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2020-07-15: common mod, no xml

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-1:2014/A1:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
EN 62841-3-1:2014/A1:2021

No scope available

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-1:2014/A12:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
EN 62841-3-1:2014/A12:2021

2019-11-14: this prAA represents common mods. to EN 62841-3-1:2014/prA1 (PR=70783)
DOW= DOR+48 months

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50632-2-6:2015/A2:2021(Amendment)
Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers
EN 50632-2-6:2015/A2:2020

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 applies to hammers.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-6:2020(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers (IEC 62841-2-6:2020)
EN IEC 62841-2-6:2020

This part of IEC 62841 applies to hand-held hammers.
Tools covered by this document include percussion hammers and rotary hammers,
including rotary hammers with the capability to rotate only with the percussion system
disengaged (drill only mode).
This document does not apply to drills and impact drills.
NOTE 101 Drills and impact drills are covered by IEC 62841-2-1.
This document does not apply to tools that are designed exclusively for driving fasteners,
such as palm nailers.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-6:2020/A11:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
EN IEC 62841-2-6:2020/A11:2020

2019-07-05: to be launched to the enquiry together with pr = 70011 (SV)
2019-07-05: Represents common mods. to EN 62841-2-6 (PR=70011)

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-3-9:2020/A11:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
EN IEC 62841-3-9:2020/A11:2020

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2018-11-02: this prA covers common mods to prEN IEC 62841-3-9 (PR=67950)

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-3-9:2020(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2020)
EN IEC 62841-3-9:2020

This part of IEC 62841 applies to transportable mitre saws intended to be used with a
toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals
except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might
simply be referred to as saw or tool.
This International Standard does not apply to mitre saws intended to cut other metals, such
as magnesium, steel and iron. This document does not apply to mitre saws with an automatic
feeding device.
NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3.
This document does not apply to saws designed for use with abrasive wheels.
NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10.
This document does not apply to tools combining the function of a mitre saw with the function
of a table saw.
NOTE 103 Transportable tools combining the function of a mitre saw with the function of a table saw are
covered by a future part of IEC 62841-3.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-4:2016/A1:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/A1:2019)
EN 62841-3-4:2016/A1:2020

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day