SIST EN 302 120 V1.1.1:2005

• Abstract:

  To make a European endorsement of the ATM-Forum specification Operation of the Bearer Independant Call Control (BICC) Protocol with SIG 4.0/PNNI 1.0/AINI (AF-CS-VMOA-0146.000) and verify references.

• Status: Published
• Publication Date: 31-Dec-2004
• ICS: 33.040.35 - Telephone networks
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2005
• Due Date: 01-Jan-2005
• Completion Date: 01-Jan-2005
• Ref Project: ETSI EN 302 120 V1.1.1 (2003-01) - Services and Protocols for Advanced Networks (SPAN); Operation of the Bearer Independant Call Control (BICC) protocol with SIG.4/PNNI1.0/AINI signalling specification [ATM Forum specification AF-CS-VMOA-0146.000 (2000) modified]

SIST EN 302 120 V1.1.1:2005 is the Slovenian adoption of ETSI EN 302 120 V1.1.1, a European Standard from ETSI in the SPAN series. It specifies how the Bearer Independent Call Control (BICC) protocol operates with SIG 4.0, PNNI 1.0 and AINI signalling to support construction of an ATM bearer connection. The document is for people implementing or checking interworking between call control signalling and bearer control signalling in telecommunication networks.

What does SIST EN 302 120 V1.1.1:2005 specify?

SIST EN 302 120 V1.1.1:2005 is a European endorsement of the ATM Forum specification AF-CS-VMOA-0146.000 (2000), with ETSI-defined modifications. Its scope is the stage three interworking between BICC call control signalling entities and SIG 4.0, PNNI 1.0 and AINI bearer control signalling entities.

The document is organized as an endorsement notice that states which parts of the ATM Forum specification apply and which text is replaced, removed or added. The front matter also includes Intellectual Property Rights, Foreword and History.

The endorsed text mainly updates the scope and references so that the document points to the ETSI and ITU-T documents that are used with it.

What are the key requirements of SIST EN 302 120 V1.1.1:2005?

The standard does not define a new protocol from scratch. SIST EN 302 120 V1.1.1:2005 applies the ATM Forum specification, but only after the listed ETSI changes are made.

• Clause 1.2 replaces the scope text. The revised scope says the document specifies stage three interworking between BICC call control signalling entities and SIG 4.0, PNNI 1.0 and AINI bearer control signalling entities. In practice, implementers use this as the exact boundary of what must interwork.
• Clause 2 replaces the references section text. It explains how references are treated as specific or non-specific. That matters because a specific reference fixes the edition, while a non-specific reference always points to the latest version.
• Reference [1] is replaced by ITU-T Recommendation Q.1902. This ties BICC to Capability Set 2, so readers know which BICC basis applies when implementing or verifying behavior.
• Reference [6] is replaced by ETSI EN 300 485. This brings in the ETSI definition and use of cause and location in DSS1 and SS7 ISUP, which matters wherever cause handling is exchanged or checked.
• Reference [14] is replaced by ETSI EN 301 814. This points the reader to the ETSI endorsement of the AINI signalling specification, so AINI behavior is aligned with the ETSI-endorsed version.
• Reference [15] is added. ITU-T Recommendation I.130 is added for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN. This gives the service-description framework behind the stage-three work.
• Clause 4.2 removes a note tied to ANSI T1.113.3. In practice, this removes an older ISUP-related side note that is not part of the endorsed text.

What terms does SIST EN 302 120 V1.1.1:2005 define?

• Bearer Independent Call Control (BICC) - A call control protocol used here as the basis for interworking with bearer control signalling.
• SIG 4.0 - A signalling entity named in the scope as part of the bearer control interworking.
• PNNI 1.0 - A signalling entity named in the scope for the ATM network side of the interworking.
• AINI - The ATM Inter-Network Interface signalling specification endorsed by ETSI EN 301 814.
• ATM bearer connection - The connection that the BICC and bearer signalling entities work together to construct.
• Stage three - The detailed interworking stage referenced by ITU-T Recommendation I.130.

Who uses SIST EN 302 120 V1.1.1:2005?

SIST EN 302 120 V1.1.1:2005 is used by telecom engineers, protocol implementers, interoperability test teams, network operators and equipment vendors working with ATM and call-control interworking. It helps them check which signalling references apply, how BICC is linked to bearer control, and which ETSI-endorsed documents to use when building or verifying compatible behavior.

What changed in SIST EN 302 120 V1.1.1:2005 from the previous edition?

This ETSI EN modifies ATM Forum specification AF-CS-VMOA-0146.000 (2000) by replacing the scope text in clause 1.2, replacing the references text in clause 2, replacing references [1], [6] and [14], adding reference [15], removing reference [10] and removing reference [11]. It also removes the note in clause 4.2 related to ANSI T1.113.3.

Which standards are used with SIST EN 302 120 V1.1.1:2005?

• ITU-T Recommendation Q.1902 - Provides the BICC protocol basis identified as Capability Set 2.
• ETSI EN 300 485 - Provides the ETSI definition and usage of cause and location in DSS1 and SS7 ISUP.
• ETSI EN 301 814 - Provides the ETSI-endorsed AINI signalling specification.
• ITU-T Recommendation I.130 - Provides the method for characterizing telecommunication services and ISDN network capabilities.

What does the SIST EN 302 120 V1.1.1:2005 document contain?

The document contains the front matter, the endorsement notice, and the history section. The endorsement notice is the technical core: it states the ETSI-approved modifications to the ATM Forum specification and the reference updates that go with them.

It also carries an Intellectual Property Rights notice that points readers to ETSI’s IPR information service. The history section records the document version and its approval and publication timeline.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Storitve in protokoli za napredna omrežja (SPAN) – Obratovanje protokola od nosilca neodvisnega krmiljenja klica (BICC) s specifikacijo signalizacije SIG.4/PNNI1.0/AINI [specifikacija ATM Forum AF-CS-VMOA-0146.000 (2000), spremenjena]Services and Protocols for Advanced Networks (SPAN); Operation of the Bearer Independant Call Control (BICC) protocol with SIG.4/PNNI1.0/AINI signalling specification [ATM Forum specification AF-CS-VMOA-0146.000 (2000) modified]33.040.35Telefonska omrežjaTelephone networksICS:Ta slovenski standard je istoveten z:EN 302 120 Version 1.1.1SIST EN 302 120 V1.1.1:2005en01-januar-2005SIST EN 302 120 V1.1.1:2005SLOVENSKI
STANDARD
ETSI ETSI EN 302 120 V1.1.1 (2003-01) 2
Reference DEN/SPAN-130309 Keywords ATM, BICC, endorsement ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 302 120 V1.1.1:2005

ETSI ETSI EN 302 120 V1.1.1 (2003-01) 3 Contents Intellectual Property Rights.4 Foreword.4 Endorsement notice.4 History.6
ETSI ETSI EN 302 120 V1.1.1 (2003-01) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been
...