SIST ISO/IEC 13818-1:2010/Amd 2:2010
(Amendment)Information technology - Generic coding of moving pictures and associated audio information: Systems AMENDMENT 2: Carriage of auxiliary video streams
Information technology - Generic coding of moving pictures and associated audio information: Systems AMENDMENT 2: Carriage of auxiliary video streams
Technologies de l'information - Codage générique des images animées et du son associé: Systèmes AMENDEMENT 2: Chariot de flux vidéo auxiliaires
Informacijska tehnologija - Splošno kodiranje gibljivih slik in pripadajočih avdio informacij: Sistemi Dopolnilo 2: Prevoz pomožnih video struj
Amandma A2:2010 je dodatek k standardu SIST ISO/IEC 13818-1:2010
To priporočilo / mednarodni standard določa sistemsko plast kodiranja. Razvit je bil predvsem za podporo kombinaciji video in avdio kodirnih metod, določenih v 2. in 3- delu ISO/IEC 13818. Sistemska plast podpira šest osnovnih funkcij:
1) sinhronizacijo več stisnjenih tokov pri dekodiranju;
2) prepletanje več stisnjenih tokov v en sam tok;
3) inicializacija medpomnilnika za zagon dekodiranja;
4) neprekinjeno upravljanje medpomnilnika;
5) identifikacijo časa;
6) multipleksiranje in označevanje različnih komponent v sistemskem toku.
ITU-T Rec. H.222.0 | ISO/IEC 13818-1 multipleksiran bitni tok je bodisi transportni bodisi programski tok. Oba tokova sta sestavljena iz PES paketov in paketov, ki vsebujejo ostale potrebne informacije. Obe vrsti tokov podpirata multipleksiranje stisnjenih video in avdio tokov iz enega programa s skupnim časovnim merilom. Transportni tok dodatno podpira multipleksiranje stisnjenih video in avdio tokov iz več programov z neodvisnimi časovnimi merili. Za okolja, ki so skoraj brez napak, je na splošno bolj primeren programski tok, ki podpira programsko obdelavo informacij programa. Transportni tok je bolj primeren za uporabo v okoljih, kjer so napake verjetne. ITU-T Rec. H.222.0 | ISO/IEC 13818-1 multipleksiran bitni tok je bodisi transportni tok bodisi programski tok, sestavljen iz dveh plasti: Najbolj oddaljena plast je sistemska plast, najbolj notranja pa je plast stiskanja. Sistemska plast zagotavlja potrebne funkcije za uporabo enega ali več stisnjenih podatkovnih tokov v sistemu. Video in avdio deli te specifikacije določajo plast stisnjenega kodiranja za avdio in video podatke. Kodiranje drugih vrst podatkov ni določeno s to specifikacijo, vendar je podprto z sistemsko plastjo, pod pogojem, da se druge vrste podatkov držijo omejitev, določenih v točki 2.7.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 13818-1
Third edition
2007-10-15
AMENDMENT 2
2008-12-15
Corrected version
2010-07-15
Information technology — Generic coding
of moving pictures and associated audio
information: Systems
AMENDMENT 2: Carriage of auxiliary video
data
Technologies de l'information — Codage générique des images
animées et du son associé: Systèmes
AMENDEMENT 2: Chariot de données vidéo auxiliaires
Reference number
ISO/IEC 13818-1:2007/Amd.2:2008(E)
©
ISO/IEC 2008
---------------------- Page: 1 ----------------------
ISO/IEC 13818-1:2007/Amd.2:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published by ISO in 2009
Published in Switzerland
ii © ISO/IEC 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 13818-1:2007/Amd.2:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 13818-1:2007/Amd.2:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in
collaboration with ITU-T. The identical text is published as ITU-T Rec.H.222.0 (2006)/Amd.2 (08/2007).
This corrected version of ISO/IEC 13818-1:2007/Amd.2:2008 incorporates the following corrections: the title
has been changed from “Information technology — Generic coding of moving pictures and associated audio
information: Systems — Amendment 2: Carriage of auxiliary video streams” to “Information technology —
Generic coding of moving pictures and associated audio information: Systems — Amendment 2: Carriage of
auxiliary video data”, and the reference on the cover page has been changed from “ISO” to “ISO/IEC”.
© ISO/IEC 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 13818-1:2007/Amd.2:2008(E)
INTERNATIONAL STANDARD
ITU-T RECOMMENDATION
Information technology – Generic coding of moving pictures
and associated audio information: Systems
Amendment 2
Carriage of auxiliary video data
1) Clause 2.4.3.7
Replace Table 2-27 with the following one:
Table 2-27 – Stream_id_extension assignments
stream_id_extension Note stream coding
000 0000 1 IPMP Control Information stream
000 0001 2 IPMP stream
000 0010 … 000 1111 ISO/IEC 14496-17 text stream
001 0000 … 001 1111 ISO/IEC 23002-3 auxiliary video stream
010 0010 010 0000 … 011 1111 reserved_data_stream
100 0000 … 111 1111 private_stream
NOTE 1 – PES packets of stream_id_extension 0b000 0000 (IPMP Control Information Stream) have a unique
syntax specified in ISO/IEC 13818-11 (MPEG-2 IPMP).
NOTE 2 – PES packets of stream_id_extension 0b000 0001 (IPMP Stream) have a unique syntax specified in
ISO/IEC 13818-11 (MPEG-2 IPMP).
2) Clause 2.4.4.9
Replace Table 2-34 with the following one:
Table 2-34 – Stream type assignments
Value Description
0x00 ITU-T | ISO/IEC Reserved
0x01 ISO/IEC 11172-2 Video
0x02 ITU-T Rec. H.262 | ISO/IEC 13818-2 Video or ISO/IEC 11172-2
constrained parameter video stream
0x03 ISO/IEC 11172-3 Audio
0x04 ISO/IEC 13818-3 Audio
0x05 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private_sections
0x06 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing
private data
0x07 ISO/IEC 13522 MHEG
0x08 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 Annex A DSM-CC
0x09 ITU-T Rec. H.222.1
0x0A ISO/IEC 13818-6 type A
0x0B ISO/IEC 13818-6 type B
0x0C ISO/IEC 13818-6 type C
0x0D ISO/IEC 13818-6 type D
0x0E ITU-T Rec. H.222.0 | ISO/IEC 13818-1 auxiliary
ITU-T Rec. H.222.0 (2006)/Amd.2 (08/2007) 1
---------------------- Page: 4 ----------------------
ISO/IEC 13818-1:2007/Amd.2:2008(E)
Table 2-34 – Stream type assignments
Value Descripti
...
SLOVENSKI STANDARD
SIST ISO/IEC 13818-1:2010/Amd 2:2010
01-oktober-2010
,QIRUPDFLMVNDWHKQRORJLMD6SORãQRNRGLUDQMHJLEOMLYLKVOLNLQSULSDGDMRþLKDYGLR
LQIRUPDFLM 6LVWHPL
'RSROQLOR 3UHYR]SRPRåQLKYLGHRVWUXM
,QIRUPDWLRQWHFKQRORJ\*HQHULFFRGLQJRIPRYLQJSLFWXUHVDQGDVVRFLDWHGDXGLR
LQIRUPDWLRQ 6\VWHPV
$0(1'0(17 &DUULDJHRIDX[LOLDU\YLGHRVWUHDPV
7HFKQRORJLHVGHO
LQIRUPDWLRQ&RGDJHJpQpULTXHGHVLPDJHVDQLPpHVHWGXVRQ
DVVRFLp 6\VWqPHV
$0(1'(0(17 &KDULRWGHIOX[YLGpRDX[LOLDLUHV
Ta slovenski standard je istoveten z: ISO/IEC 13818-1:2007/Amd 2:2008
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST ISO/IEC 13818-1:2010/Amd 2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO/IEC 13818-1:2010/Amd 2:2010
---------------------- Page: 2 ----------------------
SIST ISO/IEC 13818-1:2010/Amd 2:2010
INTERNATIONAL ISO/IEC
STANDARD 13818-1
Third edition
2007-10-15
AMENDMENT 2
2008-12-15
Information technology — Generic coding
of moving pictures and associated audio
information: Systems
AMENDMENT 2: Carriage of auxiliary video
streams
Technologies de l'information — Codage générique des images
animées et du son associé: Systèmes
AMENDEMENT 2: Chariot de flux vidéo auxiliaires
Reference number
ISO/IEC 13818-1:2007/Amd.2:2008(E)
©
ISO/IEC 2008
---------------------- Page: 3 ----------------------
SIST ISO/IEC 13818-1:2010/Amd 2:2010
ISO/IEC 13818-1:2007/Amd.2:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published by ISO in 2009
Published in Switzerland
ii © ISO/IEC 2008 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO/IEC 13818-1:2010/Amd 2:2010
ISO/IEC 13818-1:2007/Amd.2:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 13818-1:2007/Amd.2:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in
collaboration with ITU-T. The identical text is published as ITU-T Rec.H.222.0 (2006)/Amd.2 (08/2007).
© ISO/IEC 2008 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO/IEC 13818-1:2010/Amd 2:2010
---------------------- Page: 6 ----------------------
SIST ISO/IEC 13818-1:2010/Amd 2:2010
ISO/IEC 13818-1:2007/Amd.2:2008(E)
INTERNATIONAL STANDARD
ITU-T RECOMMENDATION
Information technology – Generic coding of moving pictures
and associated audio information: Systems
Amendment 2
Carriage of auxiliary video data
1) Clause 2.4.3.7
Replace Table 2-27 with the following one:
Table 2-27 – Stream_id_extension assignments
stream_id_extension Note stream coding
000 0000 1 IPMP Control Information stream
000 0001 2 IPMP stream
000 0010 … 000 1111 ISO/IEC 14496-17 text stream
001 0000 … 001 1111 ISO/IEC 23002-3 auxiliary video stream
010 0010 010 0000 … 011 1111 reserved_data_stream
100 0000 … 111 1111 private_stream
NOTE 1 – PES packets of stream_id_extension 0b000 0000 (IPMP Control Information Stream) have a unique
syntax specified in ISO/IEC 13818-11 (MPEG-2 IPMP).
NOTE 2 – PES packets of stream_id_extension 0b000 0001 (IPMP Stream) have a unique syntax specified in
ISO/IEC 13818-11 (MPEG-2 IPMP).
2) Clause 2.4.4.9
Replace Table 2-34 with the following one:
Table 2-34 – Stream type assignments
Value Description
0x00 ITU-T | ISO/IEC Reserved
0x01 ISO/IEC 11172-2 Video
0x02 ITU-T Rec. H.262 | ISO/IEC 13818-2 Video or ISO/IEC 11172-2
constrained parameter video stream
0x03 ISO/IEC 11172-3 Audio
0x04 ISO/IEC 13818-3 Audio
0x05 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private_sections
0x06 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing
private data
0x07 ISO/IEC 13522 MHEG
0x08 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 Annex A DSM-CC
0x09 ITU-T Rec. H.222.1
...
SLOVENSKI STANDARD
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
01-julij-2010
,QIRUPDFLMVNDWHKQRORJLMD6SORãQRNRGLUDQMHJLEOMLYLKVOLNLQSULSDGDMRþLKDYGLR
LQIRUPDFLM 6LVWHPL
'RSROQLOR 3UHYR]SRPRåQLKYLGHRVWUXM
,QIRUPDWLRQWHFKQRORJ\*HQHULFFRGLQJRIPRYLQJSLFWXUHVDQGDVVRFLDWHGDXGLR
LQIRUPDWLRQ 6\VWHPV
$0(1'0(17 &DUULDJHRIDX[LOLDU\YLGHRVWUHDPV
7HFKQRORJLHVGHO
LQIRUPDWLRQ&RGDJHJpQpULTXHGHVLPDJHVDQLPpHVHWGXVRQ
DVVRFLp 6\VWqPHV
$0(1'(0(17 &KDULRWGHIOX[YLGpRDX[LOLDLUHV
Ta slovenski standard je istoveten z: ISO/IEC 13818-1:2007/Amd 2:2008
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST ISO/IEC 13818-1:2010/oAmd en
2:2010
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
---------------------- Page: 2 ----------------------
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
INTERNATIONAL ISO/IEC
STANDARD 13818-1
Third edition
2007-10-15
AMENDMENT 2
2008-12-15
Information technology — Generic coding
of moving pictures and associated audio
information: Systems
AMENDMENT 2: Carriage of auxiliary video
streams
Technologies de l'information — Codage générique des images
animées et du son associé: Systèmes
AMENDEMENT 2: Chariot de flux vidéo auxiliaires
Reference number
ISO/IEC 13818-1:2007/Amd.2:2008(E)
©
ISO/IEC 2008
---------------------- Page: 3 ----------------------
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
ISO/IEC 13818-1:2007/Amd.2:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published by ISO in 2009
Published in Switzerland
ii © ISO/IEC 2008 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
ISO/IEC 13818-1:2007/Amd.2:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 13818-1:2007/Amd.2:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in
collaboration with ITU-T. The identical text is published as ITU-T Rec.H.222.0 (2006)/Amd.2 (08/2007).
© ISO/IEC 2008 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
---------------------- Page: 6 ----------------------
SIST ISO/IEC 13818-1:2010/oAmd 2:2010
ISO/IEC 13818-1:2007/Amd.2:2008(E)
INTERNATIONAL STANDARD
ITU-T RECOMMENDATION
Information technology – Generic coding of moving pictures
and associated audio information: Systems
Amendment 2
Carriage of auxiliary video data
1) Clause 2.4.3.7
Replace Table 2-27 with the following one:
Table 2-27 – Stream_id_extension assignments
stream_id_extension Note stream coding
000 0000 1 IPMP Control Information stream
000 0001 2 IPMP stream
000 0010 … 000 1111 ISO/IEC 14496-17 text stream
001 0000 … 001 1111 ISO/IEC 23002-3 auxiliary video stream
010 0010 010 0000 … 011 1111 reserved_data_stream
100 0000 … 111 1111 private_stream
NOTE 1 – PES packets of stream_id_extension 0b000 0000 (IPMP Control Information Stream) have a unique
syntax specified in ISO/IEC 13818-11 (MPEG-2 IPMP).
NOTE 2 – PES packets of stream_id_extension 0b000 0001 (IPMP Stream) have a unique syntax specified in
ISO/IEC 13818-11 (MPEG-2 IPMP).
2) Clause 2.4.4.9
Replace Table 2-34 with the following one:
Table 2-34 – Stream type assignments
Value Description
0x00 ITU-T | ISO/IEC Reserved
0x01 ISO/IEC 11172-2 Video
0x02 ITU-T Rec. H.262 | ISO/IEC 13818-2 Video or ISO/IEC 11172-2
constrained parameter video stream
0x03 ISO/IEC 11172-3 Audio
0x04 ISO/IEC 13818-3 Audio
0x05 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private_sections
0x06 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing
private data
0x07 ISO/IEC 13522 MHEG
0x08 ITU-T Rec. H.222.0 | ISO/IEC 13818-1 Annex A DSM-CC
0x09 ITU-T Rec. H.222.1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.