iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60763-2:1998

(Main)

Specification for laminated pressboard -- Part 2: Methods of test

Specification for laminated pressboard -- Part 2: Methods of test

Gives methods of test applicable for the material classified in Part 1.

Bestimmung für Blockspan -- Teil 2: Prüfverfahren

Spécification pour cartons comprimés et contrecollés -- Partie 2: Méthodes d'essai

Expose les méthodes d'essai applicables aux matériaux classés dans la CEI 763-1.

Specification for laminated pressboard - Part 2: Methods of test (IEC 60763-2:1991)

General Information

Status
Withdrawn
Publication Date
31-May-1998
Withdrawal Date
17-Sep-2007
ICS
29.035.10 - Paper and board insulating materials
Technical Committee
IZO - Insulating materials
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Sep-2007
Due Date
10-Oct-2007
Completion Date
18-Sep-2007
Ref Project
EN 60763-2:1996 - Specification for laminated pressboard - Part 2: Methods of test

Relations

Revised
SIST EN 60763-2:2007 - Specification for laminated pressboard -- Part 2: Methods of test
Effective Date
13-May-2010
Replaced By
SIST EN 60763-2:2007 - Specification for laminated pressboard -- Part 2: Methods of test
Effective Date
01-Nov-2007
Replaced By
SIST EN 60763-2:2007 - Specification for laminated pressboard -- Part 2: Methods of test
Effective Date
29-Jan-2023

Buy Standard

EN 60763-2:1998EN 60763-2:1998
PreviousNext
Standard
EN 60763-2:1998
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60641-3-1:2008(Main)
Pressboard and presspaper for electrical purposes -- Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1
EN 60641-3-1:2008

This International Standard gives the requirements for pressboard for electrical purposes comprised of 100 % sulphate wood pulp or a mixture of sulphate wood pulp and cotton. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60641-3-2:2008
Pressboard and presspaper for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
EN 60641-3-2:2008

En/fr version published in 2008-01;This part of IEC 60641 gives the requirements for presspaper for electrical purposes comprised of 100 % sulphate wood pulp, 100 % cotton or a mixture of sulphate wood pulp and cotton.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61628-2:2001/A1:2007(Amendment)
Corrugated pressboard and presspaper for electrical purposes -- Part 2: Methods of test
EN 61628-2:1999/A1:2007

15/340/RVC established on 2006-07-07: To be published without FDIS stage * Self-evident voting results

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60763-2:2007(Main)
Specification for laminated pressboard -- Part 2: Methods of test
EN 60763-2:2007

Gives methods of test applicable for the material  classified in Part 1. Describes conditioning and  drying of test specimens. Gives mechanical tests,  compressibility and electric strengh in oil.  Specifies methods of tests concerning physical  and chemical properties of laminated pressboard.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60371-3-2:2006(Main)
Insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 2: Mica paper
EN 60371-3-2:2006

This part of IEC 60371 gives requirements for electrical insulating materials made from mica paper which is to be processed for built-up mica materials according to IEC 60371-1, such as rigid flat mica materials, flexible mica materials, curable flexible mica materials and shaped pieces. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60371-3-5:2006(Main)
Insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
EN 60371-3-5:2006

This part of IEC 60371 gives requirements for electrical insulating materials made by combining mica paper with glass fabric and bonding them together with a small amount of epoxy resin. The material is supplied in a flexible state and is designed for use in conjunction with vacuum pressure impregnation (VPI) with compatible impregnates. The final cured properties will be primarily dependent on the VPI resin used. Two bond contents are specified: - low bond with a resin content of (8 ± 3) %; - medium bond with a resin content of (16 ± 3) %. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60641-2:2005(Main)
Pressboard and presspaper for electrical purposes -- Part 2: Methods of tests
EN 60641-2:2004

Applies to pressboard and presspaper for electrical purposes. The series does not apply to laminated material. This part specifies the test methods to be used in testing pressboard and presspaper for electrical purposes to meet the requirements prescribed in the specification sheets of Part 3. NOTE In this standard, reference is made in several places to ISO standards accompanied by a short description of the method used. It is to be understood that this short description is meant for identification purposes only and that all details should be taken from the ISO standard itself. The main changes with respect to the previous edition are listed below: The following test methods have been cancelled: - Flexibility - Conductivity of the organic extract - Contamination of liquid dielectrics The following test methods have been rewritten: - Compressibility - Conductivity of the aqueous extract - Cohesion between plies The following test method has introduced: - Determination of metallic particles with X-ray.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60554-2:2004(Main)
Cellulosic papers for electrical purposes -- Part 2: Methods of test
EN 60554-2:2002

Applies to cellulosic papers for electrical purposes. It specifies the methods of test to be used in testing cellulosic papers for electrical purposes to meet the requirements prescribed in the specification sheet of EN 60554-3. In this standard, reference is made in several places to ISO standards accompanied by a short description of the method used. It is to be understood that this short description is meant for identification purposes only and that all details should be taken from the ISO standard itself.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60819-3-2:2002(Main)
Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Hybrid inorganic-organic paper
EN 60819-3-2:2001

Specifies requirements for a single type of hybrid inorganic-organic filled paper made from polyethylene-terephthalate fibres filled with silicates of aluminium and designated P-H.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60819-3-1:2002(Main)
Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Filled glass paper
EN 60819-3-1:2001

Specifies requirements for two types of filled glass paper designated: P-FG type 1: high inorganic content paper with maximum organic content 15 %; P-FG type 2: medium inorganic content paper with maximum organic content 25 %.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day