oSIST prEN ISO 11357-5:2024
(Main)Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO/DIS 11357-5:2024)
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO/DIS 11357-5:2024)
ISO 11357-5:2013 specifies a method for the determination of reaction temperatures and times, enthalpies of reaction, and degrees of conversion using differential scanning calorimetry (DSC).
The method applies to monomers, prepolymers, and polymers in the solid or liquid state. The material can contain fillers and/or initiators in the solid or liquid state.
Kunststoffe - Dynamische Differenzkalorimetrie (DSC) - Teil 5: Bestimmung von charakteristischen Reaktionstemperaturen und ‑zeiten, Reaktionsenthalpie und Umsatz (ISO/DIS 11357-5:2024)
Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5: Détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation (ISO/DIS 11357-5:2024)
L'ISO 11357-5:2013 spécifie une méthode de détermination des températures et temps de réaction, des enthalpies de réaction et degrés de transformation, en utilisant une analyse calorimétrique différentielle (DSC).
La méthode est applicable aux monomères, prépolymères et polymères à l'état solide ou liquide. Le matériau peut contenir des charges et/ou initiateurs à l'état solide ou liquide.
Polimerni materiali - Diferenčna dinamična kalorimetrija (DSC) - 5. del: Ugotavljanje karakterističnih reakcijskih temperatur in časov, entalpije reakcije in stopnje pretvorbe (ISO/DIS 11357-5:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 11357-5:2024
01-junij-2024
Polimerni materiali - Diferenčna dinamična kalorimetrija (DSC) - 5. del:
Ugotavljanje karakterističnih reakcijskih temperatur in časov, entalpije reakcije in
stopnje pretvorbe (ISO/DIS 11357-5:2024)
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic
reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
(ISO/DIS 11357-5:2024)
Kunststoffe - Dynamische Differenzkalorimetrie (DSC) - Teil 5: Bestimmung von
charakteristischen Reaktionstemperaturen und ‑zeiten, Reaktionsenthalpie und Umsatz
(ISO/DIS 11357-5:2024)
Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5: Détermination des
températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de
réaction et du degré de transformation (ISO/DIS 11357-5:2024)
Ta slovenski standard je istoveten z: prEN ISO 11357-5
ICS:
17.200.10 Toplota. Kalorimetrija Heat. Calorimetry
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 11357-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 11357-5:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 11357-5:2024
DRAFT
International
Standard
ISO/DIS 11357-5
ISO/TC 61/SC 5
Plastics — Differential scanning
Secretariat: DIN
calorimetry (DSC) —
Voting begins on:
Part 5: 2024-04-09
Determination of characteristic
Voting terminates on:
2024-07-02
reaction-curve temperatures and
times, enthalpy of reaction and
degree of conversion
Plastiques — Analyse calorimétrique différentielle (DSC) —
Partie 5: Détermination des températures et temps
caractéristiques de la courbe de réaction, de l'enthalpie de
réaction et du degré de transformation
ICS: 83.080.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
IMPORTANT — Please use this updated version dated 2024-04-04, and
TO SUBMIT, WITH THEIR COMMENTS,
discard any previous version of this DIS.
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 11357-5:2024(en)
© ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 11357-5:2024
ISO/DIS 11357-5:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 4 ----------------------
oSIST prEN ISO 11357-5:2024
ISO/DIS 11357-5:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.